[nick9one1]

Hi, 

I've successfully fitted and coded a new set of clocks, but the mileage is wrong. I've quite a bit of experience with the ususal BMW tools - ISTA, INPA, Carly, NCSExpert but have never changed the mileage and not sure where to start. 

Could someone give me a very brief overview of the steps involved? Thanks!

[duckdonald]

after coding, you have red dot ( tamper ) in kombi?
if you still have the red dot, you can change the kombi km with a programmer.
if you don't have the red dot anymore, .. then it's more difficult to do,
the km of how much they have gone up?