[boycarry]

I'm studying for more knowledge.
subject
How to reset the air bag
I never succeeded.
I bought Carprog V9.31 clone
I'm curious, how does the car work
And step, how to reset the box SRS control Airbag
I know enough not to exceed 60% How to use Carprog
Help tell story
1 how to use Carprog
2 ways to install Air Bag at the car
I never succeeded.


I will tell
1- I use Carprog
Link SRS by line A5 to chip (93C56 , 95320 , Ra57 , RL57 and DL33-57K30) etc.
2. I use menu AIRBAG - Car brand - car model And chip number
Choose read chip
Another way to use the chip read menu.
3. I use menu EEPROM - 93C,24C,95X n/a And choose the number that corresponds to the chip. , Choose to file And put it into the program cartool V1.6, 2.4,3.3F
Clear Crash , Are these correct?
Do this all the way.
I connected the device.
The fire airbag is still the same.
I use the tool OBD scan Find fault BY (DELPHL)
made in china
Can check 4 errors
I can delete 3 items.
1 negative is not. Code B1801 come from TOYOTA HILUX 2008 891700K170 Chip number (RA57)
I ordered ... delete the code.
The light goes out 2 seconds.
And the lights went up again.

Can you tell me how to do that?
I like to learn
I like to work with car


I want to succeed
Thank you very much for the good advice.

[tiguan]

You can learn a lot with search on the forum and google youtube.

good luck

https://www.youtube.com/watch?v=BTkoHutZO2c
https://www.youtube.com/watch?v=l56_9NoZ3zU

[boycarry]

You can learn a lot with search on the forum and google youtube.

good luck

https://www.youtube.com/watch?v=BTkoHutZO2c
https://www.youtube.com/watch?v=l56_9NoZ3zU

Thank you very much
To educate and encourage