[boycarry]

Hello CarTecnoloGY member friends
I want to know how to fool the control box. Airbag
I need to use resistor R (resistor)

For car
Mazda 2 and Toyota Hilux
Mazda 2 seat belts Use resistor R (resistor)

Toyota Hilux
Airbag at the steering wheel Use resistor R (resistor) as the shoulder.

Thank you very much

[MasterA2L]

Hello CarTecnoloGY member friends
I want to know how to fool the control box. Airbag
I need to use resistor R (resistor)

For car
Mazda 2 and Toyota Hilux
Mazda 2 seat belts Use resistor R (resistor)

Toyota Hilux
Airbag at the steering wheel Use resistor R (resistor) as the shoulder.

Thank you very much

maybe 2.2ohm

[boycarry]

Hello CarTecnoloGY member friends
I want to know how to fool the control box. Airbag
I need to use resistor R (resistor)

For car
Mazda 2 and Toyota Hilux
Mazda 2 seat belts Use resistor R (resistor)

Toyota Hilux
Airbag at the steering wheel Use resistor R (resistor) as the shoulder.

Thank you very much

maybe 2.2ohm

Thank you very much

[domelec]

This is very bad practice
you should only use a 2.2ohm resister for testing purpose only
do not bypass any airbag modules like this, owner of the car is at risk, you should always replace the faulty module ie seatbelts etc

[boycarry]

This is very bad practice
you should only use a 2.2ohm resister for testing purpose only
do not bypass any airbag modules like this, owner of the car is at risk, you should always replace the faulty module ie seatbelts etc

I did not
Intent to think stupid and cheat.
The Toyota Chips at 891700K170
I load another person's file to overwrite.
The airbag I bought a new and good (Works 100%)
But I also make bad or bad file modification.
I do not know, but I'm afraid the air bag is broken again. I have to find a helper.
Night, remove the air bag And to deceive
That's the steering wheel There are also good air bags.
And I will do Repair clear data crash several times.


Mazda2 Chips DL33 57K30 I lost from TACHOSOFT web
I still do not dare to bring real things to try. (Well I'm afraid)
And I will do Repair clear data crash several times.
I'm not sure I'm doing this step well enough.

I have to remove the good first.
I have to pretend that I still have the device.

Thank you for listening

[boycarry]

This is very bad practice
you should only use a 2.2ohm resister for testing purpose only
do not bypass any airbag modules like this, owner of the car is at risk, you should always replace the faulty module ie seatbelts etc

The information you gave me was very good.
I work very well From your introduction.

Yours sincerely
Thank you very much