[boycarry]

I want to learn
How ClearCrash Airbag
I use Carprog v9.31 cloning works.
Access the AIRBAG menu.
Choose a car brand such as Toyota.
3. Select the model and number to match the SRS box.
4. Choose Read.
Standart room in the ID box up the number 8X and match the front of the SRS box.
In the Status Device field read OK
The big box has this kind of text.

(19:58:16) Reading Chip .....> 8X
(19:58:24) Verifying ...................
(19:58:28) Verify OK
.................................................. ..............................................

.................................
Basic text is correct?
Next, I choose the Read / Write menu.
There is a menu.
1. Open Saved EEprog
2. Save EEprog Flie
3 . Read EEprom
4. Verify EEprom

I choose Read EEprog
I will see a lot of information. In many fields
Next I choose the Save EEprog Flie menu and choose to store on my computer. (I'm Chips 95320)

I have to do because the SRS car crash, then the AirBag is broken.

I want to ask who knows Am I doing this right?
1. Flie read from the original box to choose to put the program to Clear Crash to get a good file.
If the tool program I do not have a Clear Crash menu, use the question I loaded the file at Clear Crash from another post posted. Down, and box numbers and chips, and the brand-name car matched I brought.

Can I overwrite my SRS box?
3. Ask both 1 and 2 I can not.
I picked up a good file from the SRS box of another car that I knew the car, model number and SRS box number matched.
To overwrite the SRS box on the Airbag to crack it up already.
Am I thinking of doing this?
Thank you so much for the good advice.