Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

[WIP] Mini F56 Retrofit Driver experience switch
16-08-2017, 03:22 AM, (This post was last modified: 22-02-2018, 22:19 PM by jaramillo.)
Post: #1
XSMini  [WIP] Mini F56 Retrofit Driver experience switch
Hi all.

I have been doing a research in order to retrofit the "Driver experience switch", AKA "Sport Button" on a F56 S. If someone has more details or

3. Coding


b. I think that the following Ecus should be VO coded:
- BDC
- IHKA
- NBT
- KOMBI
- DSC
c. Coding parameters: To be tested
BDC
BDC_01 > BfImux 3004 > SWITCHBOARD_AI_C_ENABLE_DTC = aktiv
BDC_01 > BfImux 3004 > SWITCHBOARD_PDC_VARIANT = UNK_PARAM_0
BDC_01 > BfImux 3004 > SWITCHBOARD_SV_VARIANT = UNK_PARAM_0
BDC_01 > PfFesMaster 3221 > FesHasMode3 = aktiv
BDC_01 > PfFesMaster 3221 > FesHasMode4 = aktiv
BDC_01 > PfFesMaster 3221 > FesHasMode7 = aktiv
BDC_01 > PfFesMaster 3221 > FesInitMode = Basis

IHKA
IHKA_VA02 > Funktionskodierung 3001 > ECO-FUNKTION = AKTIV

DSC

DSC_CT02 > DSC_FAS_CODIERDATEN 3009 > C_FDS_FES_Verbau = FES
DSC_CT02 > DSC_FAS_CODIERDATEN 3009 > C_Segeln_vorhanden = nicht_aktiv [Default]
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode7ForceGschwValue = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode7ForceInnenValues = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode7GschwValue = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode7InnenValues = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode8ForceInnenValues = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode8GschwValue = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesMode8InnenValues = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesModeXForceGschwValue = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesModeXGschwValue = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesModeXInnenValues = mit FES
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > FesPiaEcoConfPortable = portabel
DSC_CT02 > DSC_ICM_CODIERDATEN 300A > QdmKfvSportIndividualisierbarDep = NichtIndividualisierbar

HU_NBT
HU_NBT > APIX_CID 3005 > ZIN_VARIANT = radio_zin
HU_NBT > EXBOX 3001 > CONDITION_CHECK = aktiv
HU_NBT > EXBOX 3001 > FAHRSTILANALYSE = aktiv
HU_NBT > EXBOX 3001 > FDS_POPUP_DEACTIVATE = aktiv
HU_NBT > EXBOX 3001 > MACRO_FDS = only_popup
HU_NBT > HMI 3000 > ECO_MODE = aktiv
HU_NBT > HMI 3000 > EFF_DYN_SPORT_CID = aktiv
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > ASD = ls_diag_on [Default]

KOMBI
KOMBI_I01_F56 > Anzeige_Konfiguration 3000 > BC1_GRW = aktiv
KOMBI_I01_F56 > ECO_FDS 300C > FDS_MENUE_SIGNAL_1 = menue_4
KOMBI_I01_F56 > ECO_FDS 300C > FDS_MENUE_SIGNAL_2 = menue_4
KOMBI_I01_F56 > ECO_FDS 300C > FDS_MENUE_SIGNAL_3 = menue_4
KOMBI_I01_F56 > ECO_FDS 300C > FDS_MENUE_TEXT_1 = menue_4
KOMBI_I01_F56 > ECO_FDS 300C > FDS_MENUE_TEXT_2 = menue_4
KOMBI_I01_F56 > ECO_FDS 300C > FDS_MENUE_TEXT_3 = menue_4
KOMBI_I01_F56 > ERM_Konfiguration 3004 > DXP_MOD_APPL = aktiv
KOMBI_I01_F56 > ERM_Konfiguration 3004 > DXP_MOD_TIMEOUT = aktiv
KOMBI_I01_F56 > FZG_Ausstattung 3003 > EDA_ENABLE = aktiv

Im enclosing some files related to the thread.

If someone can test my findings should be great.
Any coments or advise are fully welcome-


Attached Files Thumbnail(s)
   
Drive Experience Explanation.pdf
File Type: .pdf
Downloaded: 93 times
Size: 82.48 KB

S56 Image.pdf
File Type: .pdf
Downloaded: 64 times
Size: 88.36 KB

S56 Installing.pdf
File Type: .pdf
Downloaded: 72 times
Size: 222.65 KB

S561B.pdf
File Type: .pdf
Downloaded: 69 times
Size: 27.17 KB

X431V.pdf
File Type: .pdf
Downloaded: 75 times
Size: 157.73 KB

Quote this message in a reply
16-08-2017, 09:08 AM,
Post: #2
RE: [WIP] Mini F56 Retrofit Driver experience switch
It´s really easy, I did it a few times and it works like a charm.
Add the 3 cables, because there is no wiring harness yet, code your car with 4VA and have fun smile
Quote this message in a reply
[+] 2 users say Thank You to Freddy1 for this post
16-08-2017, 11:35 AM, (This post was last modified: 16-08-2017, 11:38 AM by jaramillo.)
Post: #3
RE: [WIP] Mini F56 Retrofit Driver experience switch
(16-08-2017, 09:08 AM)Freddy1 Wrote:  It´s really easy, I did it a few times and it works like a charm.
Add the 3 cables, because there is no wiring harness yet, code your car with 4VA and have fun smile

Thanks freddy1 for your response. There is no need to do a fdl coding, just to VO code,like in the R56S?

Thanks in advance
Quote this message in a reply
17-08-2017, 00:02 AM,
Post: #4
RE: [WIP] Mini F56 Retrofit Driver experience switch
The easiest and fastest way is VO coding in my opinion, or select the 4-5 modules and code them via VO. You can manually add those values, but 4VA does the same smile
Quote this message in a reply
[+] 2 users say Thank You to Freddy1 for this post
10-04-2018, 13:33 PM,
Post: #5
RE: [WIP] Mini F56 Retrofit Driver experience switch
Afternoon Folks,

I am looking to do this retrofit on my girlfriends F56, and happened to stumble across your posts from last year.

How technical is this in car electronics terms with wiring and that?
Have you both completed successfully on vehicles?

I wouldn't want to mess it up but she really wishes she had the driving modes now on her car.

Cheers,
Andy
Quote this message in a reply
12-10-2018, 23:09 PM,
Post: #6
RE: [WIP] Mini F56 Retrofit Driver experience switch
i need the partnumber of the wires...
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 890 462,565 8 hours ago
Last Post: NeRkO20
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,436 Yesterday, 00:17 AM
Last Post: painsage
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,206 26-03-2024, 21:25 PM
Last Post: Satia
  G05 KAFAS4 enable code missing after Retrofit ACC 6ergsm 19 2,290 26-03-2024, 12:33 PM
Last Post: Hodgsonp
  F15 6WB Retrofit VIN Error moreply 4 178 25-03-2024, 07:24 AM
Last Post: RuleNormaliai
  MGU G30 retrofit , PDC does not show laso 3 171 24-03-2024, 14:35 PM
Last Post: laso
  Problem Retrofit electrified steering column on the G31 LCI smercki 12 329 22-03-2024, 12:55 PM
Last Post: Node
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,461 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW BMW F01 Pre-LCI NBT EVO Retrofit Satia 3 212 21-03-2024, 12:53 PM
Last Post: Satia
  Bmw G31 retrofit Mgu id7 atm problem intranet 14 1,875 19-03-2024, 10:07 AM
Last Post: evaldazj

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content