Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Opcom firmware
02-04-2018, 06:51 AM,
Post: #31
KOpel  RE: Opcom firmware
OP-COM-Professional-170823e_DE-Installer
and
OP-COM-Professional-170823c_EN-Installer

Software will require Registration to use it. To do that with HQ Clone, you have to send Interface Serial (Yellow Sticker on Interface) and ID displayed on Software startup to Seller. He will only send back Registration Key to Users that have bought the Hardware from him

Best regards


Attached Files
attachement.txt
File Type: .txt
Downloaded: 444 times
Size: 660 bytes

Quote this message in a reply
[+] 14 users say Thank You to Botschafter for this post
02-06-2018, 06:23 AM,
Post: #32
RE: Opcom firmware
this is the version under the original OP-COM ?
Quote this message in a reply
02-06-2018, 08:06 AM,
Post: #33
RE: Opcom firmware
Not original version.
Its cracked version for HQ clone.
You need a HQ clone running opcom 150406b and/or vauxcom 160115a
Then you need an activation code based on your compurer HWID to make it working. You need a new activation code always you are installing it in a new computer.
Ask you supplier for this
Good luck
Reputation: +2 - dabaca [+1] , barto39 [+1]
Quote this message in a reply
[+] 4 users say Thank You to mattydr67 for this post
29-07-2018, 11:07 AM, (This post was last modified: 29-07-2018, 11:19 AM by barto39.)
Post: #34
RE: Opcom firmware
(02-06-2018, 08:06 AM)mattydr67 Wrote:  Not original version.
Its cracked version for HQ clone.
You need a HQ clone running opcom 150406b and/or vauxcom 160115a
Then you need an activation code based on your compurer HWID to make it working. You need a new activation code always you are installing it in a new computer.
Ask you supplier for this
Good luck


Hi mattydr67
  Thanks to you we can use our op-clone clone
I wanted a help: I have op-com this ver: V1.7 and it goes great with op-com 2010,2012,2014 but I need a newer version :: opcom 150406b and / or vauxcom 160115a ES :: What should you prepare to use these version???
The photos of my interfaces
Thank you


Attached Files Thumbnail(s)
       
Quote this message in a reply
29-07-2018, 13:38 PM, (This post was last modified: 29-07-2018, 13:49 PM by mattydr67.)
Post: #35
RE: Opcom firmware
Well you need nothing special
If you need HQ clone software to use you need to patch the FTDI dump for 150406b and 160115a and an activation for each computer you install it for 170823c
If you want to use the original softwares ( from offici web sites ) you don't need to do anything. You need a license for your interface.
Don't ask me where you can get it. You maybe you'll find a solution by yourself
Good luck
Reputation: +1 - barto39 [+1]
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post
29-07-2018, 14:51 PM,
Post: #36
RE: Opcom firmware
(29-07-2018, 13:38 PM)mattydr67 Wrote:  Well you need nothing special
If you need HQ clone software to use you need to patch the FTDI dump for 150406b and 160115a and an activation for each computer you install it for 170823c
If you want to use the original softwares ( from offici web sites ) you don't need to do anything. You need a license for your interface.
Don't ask me where you can get it. You maybe you'll find a solution by yourself
Good luck

hello mattydr67, thanks for answering
I think it is very difficult to find this information, but I will try to search this forum
Quote this message in a reply
30-07-2018, 05:06 AM, (This post was last modified: 30-07-2018, 05:41 AM by mattydr67.)
Post: #37
RE: Opcom firmware
Informations I gave you already. I mean whats your options. And you'll get more in forums. But most of them regarding Hq clone solutions.
Hq clone patch for your tool I think you can find someone that will sell you.(I don't think he sell it in this forum but I am not checking the market place ).
But only for Hq clone softwares up to 160115a.
For 170823c software for Hq clone you can get activation (if your tool is patched already for 160115a ) only from the developer.
Good luck
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post
30-07-2018, 06:30 AM,
Post: #38
RE: Opcom firmware
(30-07-2018, 05:06 AM)mattydr67 Wrote:  Informations I gave you already. I mean whats your options. And you'll get more in forums. But most of them regarding Hq clone solutions.
Hq clone patch for your tool I think you can find someone that will sell you.(I don't think he sell it in this forum but I am not checking the market place ).
But only for Hq clone softwares up to 160115a.
For 170823c software for Hq clone you can get activation (if your tool is patched already for 160115a ) only from the developer.
Good luck
Thank you for helping mattydr67
I want to pay for these fimware etc., so that the op-com works with the new 160115a
But after leaving a message in several forums and looking for a week, I can not find a help and of course paying, maybe they are not contacted
Quote this message in a reply
30-07-2018, 08:03 AM, (This post was last modified: 30-07-2018, 08:15 AM by mattydr67.)
Post: #39
RE: Opcom firmware
Maybe they are in holliday.
Its called patch for FTDI in case you need a HQ clone solution. Or is called "license" in case of original stuff.
Firmware is the original one installed by the opcom software.
In other forum is there one guy who sell this Hq clone solution in public. I haven't seen others. Hq clone solution is not really facile for reverse engineering. And the one who sold it in publuc has a Kg bought it or get it from someone else.
He is not the developer and I really don't know how he get it and I also don't care. But he has the right solution. I don't know who you contact it but take care
Good luck
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post
11-10-2018, 08:44 AM,
Post: #40
RE: Opcom firmware
What's the difference between 170823c and 150406b ?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
KVauxhall HMI 2.0 USB firmware 23228506 need miriaga4344 0 124 24-11-2023, 11:59 AM
Last Post: miriaga4344
  OPCOM "NEW" V1.99 does not communicate with ESC (ECU does not reply, please wait 2 se lim0nade 30 8,268 20-03-2022, 17:01 PM
Last Post: mattydr67
  Opcom Motherboard version (can't find USB drivers) BrainBT 5 1,364 17-10-2019, 17:18 PM
Last Post: skyline
  Opcom Bootloader Repair with TL866 ICSP port aki1 3 1,622 07-10-2019, 13:07 PM
Last Post: avepla
  Opcom HQ Installers 2017 Gabriel87 18 10,349 30-09-2019, 22:30 PM
Last Post: AIR0
  opcom clone need help to repair autosolutions 1 814 18-09-2019, 02:40 AM
Last Post: mattydr67
  OPCOM problem conecting CrossMan 22 5,282 02-08-2019, 05:18 AM
Last Post: mattydr67
KOpel OPCOM china for win7 or win10 josef1708 7 4,520 26-06-2019, 22:27 PM
Last Post: MartinB
KOpel Solved! Opcom V1.99 communication error irarkh 23 30,903 07-05-2019, 06:40 AM
Last Post: Sirius83
KOpel Software Opcom Hq v12, v13 ,v15 and Vaux com v13, v16 McMihai 19 12,711 30-12-2018, 22:56 PM
Last Post: Moldovan1

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content