Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Flash file for W204 Valeo steering column switch.
04-06-2018, 19:54 PM,
Post: #11
RE: Flash file for W204 Valeo steering column switch.
Im having same error...

But everything else is working nice... just on angle error...

Someone already tried to clean it sucessfuly?
Quote this message in a reply
05-06-2018, 02:19 AM,
Post: #12
RE: Flash file for W204 Valeo steering column switch.
how is the angle error ?

For me, I first install the steering column without steering wheel,
the use diagnose tool to read the angle sensor in live and make sure it is near 0°
then install steering wheel back to the marked angle.
After everything installed and tightened, use diagnose tool to clear all error codes included airbag errors.
Test drive and turn steering all the way to left and right and hold for 5sec. couple times respectively.
Scan for error codes again, no more errors, good to go.
Quote this message in a reply
05-06-2018, 02:23 AM,
Post: #13
RE: Flash file for W204 Valeo steering column switch.
Ive got error:

"C220500 There is an internal fault in the steering angle sensor"

Everything is from factory... Never touched.
Quote this message in a reply
05-06-2018, 02:30 AM,
Post: #14
RE: Flash file for W204 Valeo steering column switch.
try clear the error by diagnose tool,
power down - remove key for 2min
insert key and turn to position 1,
use diagnose tool read the angle.....
Quote this message in a reply
05-06-2018, 02:49 AM,
Post: #15
RE: Flash file for W204 Valeo steering column switch.
(05-06-2018, 02:30 AM)BabeH Wrote:  try clear the error by diagnose tool,
power down - remove key for 2min
insert key and turn to position 1,
use diagnose tool read the angle.....

I did all that... Also tried to reset with xentry...

It clear error... But when i touch on steering its comes back.
Quote this message in a reply
05-06-2018, 03:26 AM, (This post was last modified: 05-06-2018, 03:39 AM by BabeH.)
Post: #16
RE: Flash file for W204 Valeo steering column switch.
then probably either the angle sensor is damaged,
or it is already turned too many fault angle....

what happen if just reading the angle sensor without steering wheel ?
can you read the angle ? or just got error ?
Quote this message in a reply
18-06-2018, 23:34 PM,
Post: #17
RE: Flash file for W204 Valeo steering column switch.
(05-06-2018, 03:26 AM)BabeH Wrote:  then probably either the angle sensor is damaged,
or it is already turned too many fault angle....

what happen if just reading the angle sensor without steering wheel ?
can you read the angle ? or just got error ?

Just got the error...
As soon i touch the steering.

Can be something related to the FW/SW?
Quote this message in a reply
19-06-2018, 07:56 AM,
Post: #18
RE: Flash file for W204 Valeo steering column switch.
what is the error code ?

do you get any angle reading ?
Quote this message in a reply
13-07-2019, 12:22 PM,
Post: #19
YTMercedes  RE: Flash file for W204 Valeo steering column switch.
I have been searching around but nobody know.
just found a post in China but the info are useless. no


Assume that your hardware and software should still fine.
Take out part 1.2.3. shown in the photo.
In [3] there is a white gearwheel, make sure the hole is pointing to the middle teeth on the copper disc.

   

Install back everything, use diagnose tool to read data steam,
check if the angle reading is correct.
Then clear all fault codes. enjoy
Quote this message in a reply
[+] 1 user says Thank You to BabeH for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes i need those flashware of the hardware please it's HU6 i need to flash rzouga97 4 216 19-02-2024, 23:04 PM
Last Post: DerLehrer
YTMercedes W204 - Camshaft position sensor resistance value guyfriendx 1 73 15-02-2024, 03:19 AM
Last Post: mercis
  mercedes benz w204 virgin salliemohamed 0 127 09-01-2024, 16:42 PM
Last Post: salliemohamed
  Solved ✔ W204 SIM271KE Renew 57Tuning 3 188 24-12-2023, 13:51 PM
Last Post: 57Tuning
YTMercedes circuit diagram w204 220d Schnitzer 6 188 15-12-2023, 16:38 PM
Last Post: Schnitzer
  W204 AMG Activation(request) donjuan020 1 251 26-11-2023, 19:39 PM
Last Post: piotrek1994
YTMercedes W204 C63 2012 uptade soft gearbox MCT & Hu45 spider231 7 287 23-11-2023, 15:10 PM
Last Post: gcs190
  Agility W204 with 7Tronic+ haxigi 4 288 15-11-2023, 21:34 PM
Last Post: Brandy
YTMercedes I locked for DTS Projects W204 hassan m 0 125 13-11-2023, 13:09 PM
Last Post: hassan m
YTMercedes W204 VGS3 - NEED SCN CODING QUICK SERVICE 4 558 10-11-2023, 12:32 PM
Last Post: Automotive 1

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content