Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO



BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
23-08-2017, 18:57 PM, (This post was last modified: 09-03-2018, 11:22 AM by aknight720.)
Post: #1
XZBMW  BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
In the later ICOM Firmware (03-15-00 +), BMW have decided to close ssh if you do not have the public key, also they have added RSA signed firmware, which means you cannot downgrade to an older firmware version because they are not signed.

In the attached link are 3 files:-

Use this if you *have* already upgraded to 03-15-00 or 03-15-02

ICOM_Restore.bin - a custom restore image which will restore to the latest firmware but unprotected.

Use the files below, if you have *not* already updated to 03-15-00 or 03-15-02

ICOM-BootImage-01-26-00c.bin - this contains the *FIX* for ssh.

ICOM-ApplicationImage-01-41-02c.bin - this contains a patch to bypass the need for signed firmware.

No other aspects of the firmware have been changed and it is 100% safe to use like the original firmware.

NOTE: I have a version ready for ICOM-Next, but would need someone to donate a unit for testing.

ICOM-Image-03-15-02.txt
File Type: .txt
Downloaded: 1,117 times
Size: 50 bytes

Reputation: +34 - spider80 [+1] , sebastianfernandes [+1] , Dirchik [+1] , cryptocar [+1] , snypertje [+1] , Enabled [+1] , B1257 [+1] , volavka [+2] , Roo [+1] , Joe2 [+1] , BaggieMatt [+1] , flterence [+1] , Loliceman [+1] , smlee747 [+1] , simonchs [+1] , RReader [+1] , Paul [+1] , Vojno [+1] , BMWS1000RR [+1] , danyro [+1] , jaramillo [+1] , _villi_ [+1] , rabihfiras [+1] , os1968 [+1] , ddam81 [+1] , jogi8850 [+1] , JarsaR [+1] , flanker78 [+1] , carlosgaros [+1] , Rooster330i [+1] , laco210 [+1] , jimi [+1] , HiBit [+1]
Quote this message in a reply
[+] 73 users say Thank You to aknight720 for this post
23-08-2017, 20:17 PM,
Post: #2
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(23-08-2017, 18:57 PM)aknight720 Wrote:  In the last ICOM Firmware, BMW have decided to close ssh, if you do not have the private key, also they have added RSA signed firmware, which means you cannot downgrade to an older firmware version because they are not signed.

In the attached link are 3 files:-

Use this if you *have* already upgraded to 03-15-02

ICOM_Restore.bin - a custom restore image which will restore to the latest firmware but unprotected.

Use the files below, if you have *not* already updated to 03-15-02

ICOM-BootImage-01-26-00c.bin - this contains the *FIX* for ssh.

ICOM-ApplicationImage-01-41-02c.bin - this contains a patch to bypass the need for signed firmware.

No other aspects of the firmware have been changed and it is 100% safe to use like the original firmware.

NOTE: I have a version ready for ICOM-Next, but would need someone to donate a unit for testing.



I've got an extra ICOM NEXT Genuine lying around if you're stateside.

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Reputation: +1 - aknight720 [+1]
Quote this message in a reply
[+] 3 users say Thank You to cryptocar for this post
23-08-2017, 20:35 PM,
Post: #3
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(23-08-2017, 20:17 PM)cryptocar Wrote:  I've got an extra ICOM NEXT Genuine lying around if you're stateside.

Thx for the offer but I am not stateside.
Quote this message in a reply
24-08-2017, 11:23 AM,
Post: #4
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Please add the original firmware
Quote this message in a reply
24-08-2017, 11:40 AM,
Post: #5
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(24-08-2017, 11:23 AM)ferrum Wrote:  Please add the original firmware
Look into the attachment: Icom Image-03-15-02


Attached Files
Image-03-15-02.txt
File Type: .txt
Downloaded: 381 times
Size: 70 bytes

Reputation: +2 - Dirchik [+1] , jimi [+1]
Quote this message in a reply
[+] 9 users say Thank You to jaramillo for this post
26-08-2017, 22:27 PM,
Post: #6
BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
I use the web browser for many upgrades etc but it's easier to just use ISTA. I edited the .xml files from the default msi installation to point to your modified images and replaced the MD5 hash with a hash of your files. Will this work to trick ISTA into flashing your images instead of the unmodified image?


Sent from my iPhone using Tapatalk Pro

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
[+] 1 user says Thank You to cryptocar for this post
27-08-2017, 08:24 AM,
Post: #7
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(26-08-2017, 22:27 PM)cryptocar Wrote:  I use the web browser for many upgrades etc but it's easier to just use ISTA. I edited the .xml files from the default msi installation to point to your modified images and replaced the MD5 hash with a hash of your files. Will this work to trick ISTA into flashing your images instead of the unmodified image?


Sent from my iPhone using Tapatalk Pro

If you have done it correct, I see no reason this would not work.
Quote this message in a reply
31-08-2017, 00:12 AM, (This post was last modified: 28-09-2017, 13:10 PM by cryptocar.)
Post: #8
BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(27-08-2017, 08:24 AM)aknight720 Wrote:  
(26-08-2017, 22:27 PM)cryptocar Wrote:  I use the web browser for many upgrades etc but it's easier to just use ISTA. I edited the .xml files from the default msi installation to point to your modified images and replaced the MD5 hash with a hash of your files. Will this work to trick ISTA into flashing your images instead of the unmodified image?


Sent from my iPhone using Tapatalk Pro

If you have done it correct, I see no reason this would not work.


Cool I'll share the XMLs if anyone else prefers ISTA interface instead of web browser.


Simply place OP's files in the appropriate data directory, default: C:\ProgramData\BMW\ISPI\data\TRIC\ICOM\ICOM-Image-3-15-02
If you have already installed using the unmodified .msi, this directory will already have the protected image files and XML files, the image files can be left as is, must be deleted, moved to a new directory, or renamed like in the screenshot below. the XMLs and original .bin files need to be renamed similarly to the way I did it in the following photo.
[Image: W5truWB.png]
copy these highlighted files from the .7z archive and ISTA will be be tricked into upgrading OP's files via ISTA connection manager. Tested successfully.


ICOM 3-15-02 (Unprotected ISTA Install Files).txt
File Type: .txt
Downloaded: 290 times
Size: 1.95 KB


If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
[+] 3 users say Thank You to cryptocar for this post
31-08-2017, 02:31 AM,
Post: #9
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Didn't work for me
Quote this message in a reply
31-08-2017, 03:46 AM, (This post was last modified: 31-08-2017, 04:12 AM by fabulous.)
Post: #10
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 02:31 AM)Wesk18 Wrote:  Didn't work for me

Wesk18 this file (firmware-image.xml) open both firmware-image with notepad++ and have a look
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW Original ICOM A + Clone B Sanyi85 3 136 4 hours ago
Last Post: ntuner
XZBMW need help icom BMW Dany76 8 271 Yesterday, 20:36 PM
Last Post: emhtuning
XZBMW BMW Icom A2 repair snypertje 49 7,736 15-07-2019, 15:01 PM
Last Post: ferrum
XZBMW ICOM Next firmware inspi1981 36 14,698 13-07-2019, 09:40 AM
Last Post: jararak
XZBMW ICOM Next made in china dont read VIN of an E64 but read F series Fraizer 9 350 11-07-2019, 19:16 PM
Last Post: Node
  ISTA and orig. ICOM Next can not flash HU-B Unit and Kombi -Abbort of programming Munich Simon 20 1,538 07-07-2019, 18:32 PM
Last Post: Matthew53
XZBMW ICOM A2 Clone error rond79 7 904 06-07-2019, 03:36 AM
Last Post: rond79
  ICOM A2 scheme or info BobbySD 2 192 04-07-2019, 11:09 AM
Last Post: BobbySD
  Request: BMW ISPI ISTA Launcher 1.18.2.793 2013m5 6 540 29-06-2019, 19:05 PM
Last Post: 2013m5
  ICom Clone not booting chock 6 278 26-06-2019, 05:47 AM
Last Post: chock

Forum Jump:


Users browsing this thread:
r56jar, 1 Guest(s)

Return to TopReturn to Content