Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. FemtoEVO



BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
31-08-2017, 11:25 AM,
Post: #11
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
What is the reason to upgrade icom? Since i had purchased it some time ago it didnt asked for upgrade when using ista or ista-p.
Quote this message in a reply
31-08-2017, 12:25 PM,
Post: #12
BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 11:25 AM)avatarpr Wrote:  What is the reason to upgrade icom? Since i had purchased it some time ago it didnt asked for upgrade when using ista or ista-p.


It will if you install the official .msi for the upgrade. It will prompt you for the upgrade when connecting to a vehicle.


Sent from my iPhone using Tapatalk Pro

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
30-09-2017, 00:32 AM,
Post: #13
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(31-08-2017, 02:31 AM)Wesk18 Wrote:  Didn't work for me

I fixed it in post #8 of this thread sorry for the initial error, I couldn't find my A2 at the time to test it, but I have now.

If this post helped you in anyway please use the thanks and/or REP buttons down here.under Thanks!
Quote this message in a reply
04-02-2018, 13:09 PM,
Post: #14
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(23-08-2017, 18:57 PM)aknight720 Wrote:  In the later ICOM Firmware, BMW have decided to close ssh...



Hey,

What does this ssh mean? I do not understand.secret

Thanks!
Quote this message in a reply
27-02-2018, 22:17 PM,
Post: #15
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi friends

i can use this version to update firm in ICOM A2 firmrev136 actually ?

thanks wink
Quote this message in a reply
28-02-2018, 06:44 AM,
Post: #16
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
(27-02-2018, 22:17 PM)ka_rai Wrote:  Hi friends

i can use this version to update firm in ICOM A2 firmrev136 actually ?

thanks wink

Yes.
Quote this message in a reply
05-03-2018, 19:58 PM, (This post was last modified: 06-03-2018, 00:16 AM by Clusters.)
Post: #17
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi,

i got an ICOM A2 Clone with 3-15-00 on it (reachable over web UI) and tried to update it with this version.
I got immediately after Bootimage flash start the error that it could NOT be successfully updated.

Icom dont worked afterthat normally and flashing red light COMM.
In the update log file it stays: "Signature check failed"

Did someone have this error and what is the solution?
- Should I try again on some other way?
- Should I try to restore the ICOM image and how to that right? - Is this guide still useable, becouse it seems to be for A1? -

Thanks in Advance for hints smile


Solved:
Followed the procedure in the pdf with ICOM_Restore over the file from this topic.
Now it is working like a charm, Phiyy


Attached Files
MEGA link.txt
File Type: .txt
Downloaded: 109 times
Size: 50 bytes

Quote this message in a reply
[+] 2 users say Thank You to ChampioNbg for this post
23-03-2018, 20:57 PM,
Post: #18
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi all,

Ok ive used the restore file and i still get the 2 quick flash led(red).

but this is the restore log from the usb

Builddate 2014-04-17 16:25
=> Updating boot image 1
=> Updating app image 1
=> Resetting u-boot parameters
00:01:A9:00:EE:E9
Current Mac: 00:01:A9:00:EE:E9
Serialnumber: 1120134
Write mac: 00:01:A9:00:EE:E9
=> Cleaning up /config...
=> Set restore.bin counter...
=> Setting flags
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
Success (EEPROM)
=> Done.
Success (ATMEL)
=> DONE

does this confile that the restore worked but something else is broken???

any help would be apreciated
Quote this message in a reply
24-03-2018, 15:38 PM,
Post: #19
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Never mind. reastore wored fine, found problem to be bent pin in icom.

all working now.

Thansk to the op for the zip.
Quote this message in a reply
15-06-2018, 09:59 AM,
Post: #20
RE: BMW ISPI ICOM-FW 03-15-02 (UNPROTECTED)
Hi friends

i can use this version to update firm in ICOM P actually ?

thanks wink1
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW NEW ICOM NEXT WINKFP PROBLEM jeroenbmw 62 15,726 3 hours ago
Last Post: claw
XZBMW BMW Icom A2 repair snypertje 37 3,982 Yesterday, 15:04 PM
Last Post: standaBMW
  Choosing ICOM- genuine or clone? Siller 8 333 07-01-2019, 15:06 PM
Last Post: Node
XZBMW Icom NEXT and E series CIC evaldazj 14 2,280 30-12-2018, 12:23 PM
Last Post: BimmerSLO
  Solved ✔ Probleme wih icom BMW 2009mohrice 4 288 22-12-2018, 08:27 AM
Last Post: 2009mohrice
XZBMW ICOM problem"" bmw-vci@unsupported"" rana 10 457 21-12-2018, 21:50 PM
Last Post: rana
  Icom A1 - matching software bartekj 2 166 21-12-2018, 11:19 AM
Last Post: Spitfire555
  E46 2002 + icom + no communication lustek 18 471 18-12-2018, 18:40 PM
Last Post: lustek
XZBMW ICOM A1 rj45 lan cable M_Riol 2 189 17-12-2018, 14:24 PM
Last Post: inotherwords
  Using Esys with C EVO Motocycle & ICOM next smilo 10 461 13-12-2018, 05:51 AM
Last Post: inspi1981

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content