Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Quality 5054a
24-08-2017, 09:54 AM,
Post: #1
Quality 5054a
Hi, I know this has been asked before but I can't find a good answer, I want to buy the best vas 5054a clone with all the usual parts like green board with amb2300 and Oki
Are there any known good tested ones? Please help
Regards
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to mystic8v for this post
24-08-2017, 10:28 AM, (This post was last modified: 24-08-2017, 11:13 AM by apoelistas.)
Post: #2
RE: Quality 5054a
(24-08-2017, 09:54 AM)mystic8v Wrote:  Hi, I know this has been asked before but I can't find a good answer, I want to buy the best vas 5054a clone with all the usual parts like green board with amb2300 and Oki.
Are there any known good tested ones? Please help
Regards

Good quality full chip is sp33-c without internal cables. (Unlike sp33-E)

Currently only one seller advertises sp33-c with amb2300. But not tested yet. Will take pictures as soon mine arrives but here are the pictures from their site. (In a comparison with other boards they had good oki but on this photo oki is not original). Not sure if they have two sp33-c amb2300 versions with original and fake?? Oki chips. Hope the comparison pictures with original oki are correct and my order comes with the second pair of photos.
       
       

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-08-2017, 11:56 AM,
Post: #3
RE: Quality 5054a
From what I've been able to string together the genuine Oki chip has a mirror circle on the left lower corner and a dot in the other upper right corner without the pin being cut, but genuine Oki chips are hard to find now, inside a dealership genuine 5054a the main connection to the main board is a circuit board no wires,also the TJA sits the opsite way around to the Oki unless this is just printed different on the top of it, from reading a few threads we may not need the Oki for general use ? Not sure if this is correct?
Regards
Quote this message in a reply
24-08-2017, 12:13 PM, (This post was last modified: 24-08-2017, 14:33 PM by apoelistas.)
Post: #4
RE: Quality 5054a
See second pair of photos. Some say oki is only needed for old man year cars and specific models/car makes. Not sure if this makes sense because I thought vas5054a was made for audi/vw/seat/skoda and lamborginy only. Though it may work as a j2534 passthru too e.g say honda. So oki might be needed with makes like ford (passthru). Maybe someone can give a better explanation because supporting other makes does not make sense to me.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-08-2017, 12:16 PM, (This post was last modified: 24-08-2017, 12:38 PM by sixcode.)
Post: #5
RE: Quality 5054a
(24-08-2017, 12:13 PM)apoelistas Wrote:  See second pair of photos.

and if you buy it you will get a fake one mounted, these pictures do say nothing

Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
Quote this message in a reply
[+] 6 users say Thank You to sixcode for this post
24-08-2017, 12:21 PM,
Post: #6
RE: Quality 5054a
Sixcode, can you recommend any Please?
Quote this message in a reply
24-08-2017, 12:31 PM,
Post: #7
RE: Quality 5054a
No sorry, i did buy one from Carsung, this one did have IU10 memory
but fake OKI wile picture was of ori OKI.

i did get a good deal on a brand new orginal VAS 5054 so i did buy that one also

Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
Quote this message in a reply
[+] 4 users say Thank You to sixcode for this post
24-08-2017, 13:56 PM, (This post was last modified: 25-08-2017, 12:32 PM by Enabled.)
Post: #8
RE: Quality 5054a
(24-08-2017, 12:13 PM)apoelistas Wrote:  See second pair of photos. Some say oki is only needed for old man year cars and specific models/car makes. Not sure if this makes sense because I thought vas5054a was made for audi/vw/seat/skoda and lamborginy only. Though it mat work as a j2534 passthru too e.g say honda. So oki might be needed with makes like ford (passthru). Maybe someone can give a better explanation because supporting other makes does not make sense to me.


VAS is not much more than an EDIC interface that was targeted towards VAG products. It still can operate like a normal EDIC interface for passthrough with the correct drivers.

There is no perfect clone.
Quote this message in a reply
24-08-2017, 14:03 PM, (This post was last modified: 24-08-2017, 14:35 PM by apoelistas.)
Post: #9
RE: Quality 5054a
(24-08-2017, 13:56 PM)Enabled Wrote:  There is no perfect clone. The one posted above (identical to mine) may work, but it has 55ns 3V memory, while the tool operates on 5V.

Memory is 5V I believe. It is the V suffix with 3.3 V.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
24-08-2017, 14:08 PM, (This post was last modified: 24-08-2017, 14:08 PM by DTech.)
Post: #10
RE: Quality 5054a
China pics on vas heads are just pics in 95% of cases (good ones), in general what you see is not what you get.
You must learn to compromise, to forget oki (used for pt, alhambra old and sharan old that had ford engines) , take one with 5V memory and a must ORIGINAL AMB2300, then do rework when you get it.
What china does not show is back of amb2300 board, because there you can see if is fake or not. Metal cases and stickers a lot have been copied from forums.

Regarding vas5054 as passthru maybe someone has the time to put a small tutorial in a thread so that this EDIC to be proper configured under xp,w7,w8.... and to tell what programs did they test with it, to see some real feedback.

[Image: tyl_add.png] & [Image: postbit_reputation.gif] are welcome if you think that i helped you handshake
Quote this message in a reply
[+] 8 users say Thank You to DTech for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  5054a Red Board non-bluetooth Keygen drjeep 3 296 15-11-2023, 04:40 AM
Last Post: audi666
  Last Odis Version on windows 7 with vas 5054a rochenlebelle 1 391 01-10-2023, 23:37 PM
Last Post: vagvag
  ODIS 6.2.0 Win10 x64 with 5054a Dau 3 558 23-07-2023, 09:27 AM
Last Post: Dau
0Scope Odis Service 7.2.1 problem clone 5054a CenturionM 15 1,226 05-04-2023, 02:57 AM
Last Post: CmdY53
  Odis E 12.2 for VAS 5054A wojoo 3 510 31-03-2023, 23:59 PM
Last Post: Johny
  vas 5054A odis s 9.1 drjb 5 1,058 12-12-2022, 23:15 PM
Last Post: vagvag
ZVW Clone VAS 5054A Problem Odis-S 7.2.1 Odis-12.2 paui 16 4,600 04-05-2022, 22:47 PM
Last Post: mexanico1971
ZVW VAS6154 DoiP Hight Quality Clone Driver for ODIS 8.2 aki1 16 4,012 21-04-2022, 17:18 PM
Last Post: hana
  VAS 5054A problem smtncr001 4 621 02-04-2022, 21:57 PM
Last Post: icardiag
ZVW Vas 5054a usb b, terminals on circuit board gaz1986 1 480 23-02-2022, 07:28 AM
Last Post: hmily

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content