Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

How to make a Bench using FEM for DUMMIES
19-06-2018, 20:57 PM,
Post: #31
RE: How to make a Bench using FEM for DUMMIES
Hello! tell me how to wake up nbt without filter сan? fem gw and body I see
Quote this message in a reply
10-03-2019, 14:00 PM,
Post: #32
RE: How to make a Bench using FEM for DUMMIES
(28-08-2017, 12:39 PM)Mwahab Wrote:  
(28-08-2017, 00:02 AM)bmwdd Wrote:  What if the fem_body goes to sleep mode? how can I wake it up? When it goes to sleep mode I can't even see it on esys. fem_gateway is there, but fem_body is gone.


Sent from my iPhone using Tapatalk Pro

Tool32 - FEM_20 - Sterun_kelmmen - KL15_EIN

this command i try is ok, but now I have a question: when u active the fem kl15,how to close it? I find it kl15 can not close,Unless power is cut off
Quote this message in a reply
18-03-2019, 10:04 AM, (This post was last modified: 18-03-2019, 11:16 AM by tcp443.)
Post: #33
RE: How to make a Bench using FEM for DUMMIES
hi
i got a bdc and managed to hook up the nbt evo and zbe4 but do i need to put a resistor at KCAN4 of the NBT / ZBE4? if yes, may i know the value of the resistor please?

i can get hu_nbt to come up. can code it and also program it without any issues. but just cant seem to get (G12) ZBE4 to show up. i tried with 3 different ones (working ones taken from a running car). but still could not get ZBE4 to show up in esys ecu list.

if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated. 
under
Quote this message in a reply
19-03-2019, 01:54 AM,
Post: #34
RE: How to make a Bench using FEM for DUMMIES
now i have another problem. yesterday was all OK. then i flashed bdc gw and bdc body with latest firmware. now no matter what i do (in tool32 to enable KL15), i can only see BDC_GW in ecu list.

flashing was all successful yesterday.

if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated. 
under
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,568 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
XZBMW ENAV2 bench activation Airbus 10 799 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
  Entrynav2 - Trying to Trigger Component Protection on Bench 2002JCW 5 465 30-01-2024, 16:44 PM
Last Post: DEJMIEN
XZBMW NBT display on bench without unit djordan 4 324 15-01-2024, 08:08 AM
Last Post: Powerlab
XZBMW cas / cluster bench setup Cniksor 103 23,832 09-01-2024, 09:43 AM
Last Post: MIKUr1
  Entrynav2 bench Jalami 1 296 06-01-2024, 15:28 PM
Last Post: Airbus
XZBMW ID8 bench CID can not light bbw 3 466 12-12-2023, 20:36 PM
Last Post: Airbus

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content