Possibly Related Threads…

***Mwahab*** · 29-08-2017, 10:08 AM,

(29-08-2017, 05:34 AM)IZGOY Wrote: You have a FEM or BDC ???? BDC does not work like that!

No FEM_BODY from F30

***bawareca*** · 29-08-2017, 13:30 PM,

OP, the first 2 pictures dont show.

***Mwahab*** · 30-08-2017, 00:34 AM,

(29-08-2017, 13:30 PM)bawareca Wrote: OP, the first 2 pictures dont show.

THanks brother, i will put them correctly when i open the pc.

***bmwdd*** · (This post was last modified: 30-08-2017, 11:06 AM by bmwdd.)

(28-08-2017, 12:39 PM)Mwahab Wrote: Tool32 - FEM_20 - Sterun_kelmmen - KL15_EIN

I tried again and make sure I run the command when fem_body is awake:

Code:
apiJob("FEM_20","steuern_klemmen","KL15_EIN","")

Satz : 0

  OBJECT                          = fem_20

  SAETZE                          = 1

  JOBNAME                         = steuern_klemmen

  VARIANTE                        = FEM_20

  JOBSTATUS                       = 

  UBATTCURRENT                    = -1

  UBATTHISTORY                    = -1

  IGNITIONCURRENT                 = -1

  IGNITIONHISTORY                 = -1

Satz : 1

  STAT_CAS_KLEMMEN_STATUS         = 10                   0A  .                     

  STAT_CAS_KLEMMEN_STATUS_TEXT    = KL15

  JOB_STATUS                      = OKAY

  _REQUEST                        = 7 Bytes

    0000 : 31 01 10 01 0A 0A 43                               1.....C

  _RESPONSE                       = 5 Bytes

    0000 : 71 01 10 01 0A                                     q....

But no, after 10 mins or so fem_body shutdown itself (esys disappeared and not responding to tool32) and nbt screen turns black (but remain active in esys)

***simonchs*** · 30-08-2017, 11:51 AM,

I thought a used FEM can do bench job, right?

***Mwahab*** · (This post was last modified: 31-08-2017, 01:38 AM by Mwahab.)

(30-08-2017, 10:57 AM)bmwdd Wrote:
(28-08-2017, 12:39 PM)Mwahab Wrote: Tool32 - FEM_20 - Sterun_kelmmen - KL15_EIN

I tried again and make sure I run the command when fem_body is awake:

Code:
apiJob("FEM_20","steuern_klemmen","KL15_EIN","") Satz : 0 OBJECT = fem_20 SAETZE = 1 JOBNAME = steuern_klemmen VARIANTE = FEM_20 JOBSTATUS = UBATTCURRENT = -1 UBATTHISTORY = -1 IGNITIONCURRENT = -1 IGNITIONHISTORY = -1 Satz : 1 STAT_CAS_KLEMMEN_STATUS = 10 0A . STAT_CAS_KLEMMEN_STATUS_TEXT = KL15 JOB_STATUS = OKAY _REQUEST = 7 Bytes 0000 : 31 01 10 01 0A 0A 43 1.....C _RESPONSE = 5 Bytes 0000 : 71 01 10 01 0A q....

But no, after 10 mins or so fem_body shutdown itself (esys disappeared and not responding to tool32) and nbt screen turns black (but remain active in esys)

Yes this happened on my first day, don't know how it was resolved, but it was from the PSU, it wasn't giving the required voltage.
Maybe i switched some wires on FEM, i can't really remember.

(30-08-2017, 11:51 AM)simonchs Wrote: I thought a used FEM can do bench job, right?

Yes and used FEM can do the job.

***bmwdd*** · 31-08-2017, 01:46 AM,

My PSU is giving out constant 13.8v, i'm pretty sure on that.

Sent from my iPhone using Tapatalk Pro

***Mwahab*** · (This post was last modified: 31-08-2017, 01:51 AM by Mwahab.)

(31-08-2017, 01:46 AM)bmwdd Wrote:
Mwahab

Yes this happened on my first day, don't know how it was resolved, but it was from the PSU, it wasn't giving the required voltage.
Maybe i switched some wires on FEM, i can't really remember.
[hr' Wrote:

My PSU is giving out constant 13.8v, i'm pretty sure on that.

Sent from my iPhone using Tapatalk Pro

I know you will have a shock when i tell you my PSU readings is 11V and i am flashing with it biggrin

I used UDS and it lasted for more than one day biggrin

try and play with it, anyways, TAL will keep any unit from going to sleep.

***bmwdd*** · (This post was last modified: 31-08-2017, 02:11 AM by bmwdd.)

Mwahab Wrote: I know you will have a shock when i tell you my PSU readings is 11V and i am flashing with it
I used UDS and it lasted for more than one day
try and play with it, anyways, TAL will keep any unit from going to sleep.

I used icom to take the reading, I will play around with the wires and try again

indeed TAL will keep unit from going to sleep, but I need to do other tasks as well and it's very frustrating

What do you mean by UDS?

Sent from my iPhone using Tapatalk Pro

***Mwahab*** · 31-08-2017, 02:12 AM,

(31-08-2017, 02:08 AM)bmwdd Wrote:
Mwahab Wrote: I know you will have a shock when i tell you my PSU readings is 11V and i am flashing with it
I used UDS and it lasted for more than one day
try and play with it, anyways, TAL will keep any unit from going to sleep.

I used icom to take the reading, I will play around with the wires and try again

indeed TAL will keep unit from going to sleep, but I need to do other tasks as well and it's very frustrating

What do you mean by UDS?

Sent from my iPhone using Tapatalk Pro

You will get it my friend, it may work continuously later without any mod.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	MGU Bench connection	kimz	4	381	Yesterday, 17:06 PM Last Post: kimz
	Test bench Connection to CAN ECU's	HaakonA	3	312	03-04-2024, 07:24 AM Last Post: sixcode
	Tool for bench read 8hp	Garryq	9	1,666	26-03-2024, 09:32 AM Last Post: skywoker
	Bosch MEVD172H bench backup	mrproper	1	277	23-03-2024, 18:43 PM Last Post: Ratnik1990
	ENAV2 bench activation	Airbus	10	953	25-02-2024, 08:17 AM Last Post: jb2005
	Motronic 3.3.1 bench	jaramillo	3	214	13-02-2024, 05:12 AM Last Post: 2013m5
	Dde Coding/flash with esys in bench?	ruben_17non	0	203	08-02-2024, 21:28 PM Last Post: ruben_17non
	Entrynav2 - Trying to Trigger Component Protection on Bench	2002JCW	5	564	30-01-2024, 16:44 PM Last Post: DEJMIEN
	NBT display on bench without unit	djordan	4	362	15-01-2024, 08:08 AM Last Post: Powerlab
	cas / cluster bench setup	Cniksor	103	24,392	09-01-2024, 09:43 AM Last Post: MIKUr1

Contact Us