[kizagt]

Hello
Citroen C5 2008 1.6hdi bsi -JC - NOT WORK
IT IS DEAD BSI. CAN YOU HELP OR TO TELL ME HOW TO MAKE AGAIN BACK TO LIFE I PUT BATERY AND SECOND CAR BUT THERE IS NO POWER IN THE CAR NO ELECTRIC ANY WHERE CAN DO YOU KNOW HOW TO FIX

I have the sane problem with 307 jcd bsi
i conect car on another car battery and try 2 times to read bsi pin and car get alive

[forkade]

Exactly, BSI is not kill,it is in boot mode but car is in economy mode, put BSI in car but star other car and connect +and- in car for read BSI is work 100%.

To explain better my procedure: no problem when you read BSI connected other car will start on the battery of the vehicle you read BSI because the proceed is not fast and your vehicle goes into economy mod then your BSI remains in boot mod and does not want to start your car if you happen redone a reading of your BSI and finally exit the boot mod reading and more concern, especially connect another car started on the battery of the vehicle to read.

You could understand like this: the BSI goes in economy/boot mode because the procedure takes much time – I have to connect another car to the battery of the non-starting car, start the donor-car and then I will be able to connect to the “dead” BSI and revive it by switching off the economy/boot mode.

---

When you adjust mileage on Peugeot/Citroen, it is best to put BSI out from eco-mode with Diagbox, take out fuse for front wiper and turn parking light on, put charger to battery. It is safe now to adjust mileage with FVDI.

---

when you program a bsi must always be 13.5V

[Harrycz44]

Hi all member
Pleas tried someone change odometer in Mercedes w221 with fvdi? Without used can filter? Thank you for help before my work

[nexus_jose]

Hi this is best quality HQ FVDI old version V3

Good works

I have new version pcb new 4.1 i update picture

---

This is 100 % HQ quality Fly
Pcb V4

Why you have a bridge in r45 ??


Enviado desde mi iPhone utilizando Tapatalk

[volavka]

Last week i installed fvdi sw .. was working good ..
today it show me error:5 after select software version on all brands

i renistall drivers and install again .. still same Problem
antivirus not installed on this win xp

any idea guys

Regards

[robot1]

Do you have only fvdi connected or also a other interface at this same time?
i had this problem onle time on bench after i use fvdi and vcds at this same time..

[volavka]

Yes i have vcds installed but also when unistall it still same Problem

[koyot]

Easy
reinstal 2 drivers and restart pc

[bawareca]

Try to install on fresh windows and see if it will work.

[robot1]

Chek out Google/youtube mate,there is a video also with this Problem,in search Write:

Error5 fvdi Solution

Maybe help..