Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

VVDI PROG Support/Feedback Thread
23-08-2017, 09:21 AM,
Post: #111
RE: VVDI PROG Support/Feedback Thread
VVDI Prog Where to buy the original?

which link better in the txt?

who is reliable ?


Attached Files
links.txt
File Type: .txt
Downloaded: 14 times
Size: 191 bytes

Quote this message in a reply
25-08-2017, 00:09 AM,
Post: #112
RE: VVDI PROG Support/Feedback Thread
Hello friend,
help me please~~
I tried to read and write Renesas V850E2 FG4-L uPD70F3580.
Both tasks were normal and the data were the same when compared.
However, the module could not be recognized when it was checked with diagnostic equipment after it was installed in the vehicle.
When I refer to the data sheet, I can confirm that "system protection functionality (SPF) has been implemented in all V850E2 / Fx4-L devices." The SPF includes a memory protection unit (MPU) and a system register protection (SRP).
Because of this, it seems that even if you write to the module, you can not recognize it. Is there a way to solve this?
Is it because I did not apply the Set Sec button on the upper right after the last write operation? Anyone who knows about this?
help me~
Quote this message in a reply
25-08-2017, 08:12 AM,
Post: #113
RE: VVDI PROG Support/Feedback Thread
@obdtool dealer is the best
@rainbows528 should use the newest software,now it's v4.6.0.you just read D-FLASH and P-FLASH?
should read the OPBT0 too,write back too!
Quote this message in a reply
25-08-2017, 08:59 AM, (This post was last modified: 25-08-2017, 09:40 AM by rainbows528.)
Post: #114
RE: VVDI PROG Support/Feedback Thread
(25-08-2017, 08:12 AM)louis21 Wrote:  @obdtool dealer is the best
@rainbows528 should use the newest software,now it's v4.6.0.you just read D-FLASH and P-FLASH?
should read the OPBT0 too,write back too!

dear friend.
yes . i write d_flash, P_flash, Opt0
all data is write. compare .
i use v4.6.0
why not recognize?

(25-08-2017, 08:12 AM)louis21 Wrote:  @obdtool dealer is the best
@rainbows528 should use the newest software,now it's v4.6.0.you just read D-FLASH and P-FLASH?
should read the OPBT0 too,write back too!


and VVDI Prog v.4.6.0 not support OPT0 write at uPD70F3580.
Quote this message in a reply
25-08-2017, 11:25 AM, (This post was last modified: 25-08-2017, 11:36 AM by MILITANTS.)
Post: #115
RE: VVDI PROG Support/Feedback Thread
(27-04-2016, 11:56 AM)Czozen Wrote:  Hi,
Does anyone have this tool (VVDI Prog), and can write something about it?
Does it work as they say?

Do you have any good/bad experiance with it?


Thank you for your opinions!

i have this tool and it works propely you just need to understand

hie guys am trying ti read 2M42E MCU vvdi prog and its saying chip does not support.????????
Quote this message in a reply
28-08-2017, 15:00 PM,
Post: #116
UNissan  Vvdi prog
Vvdi prog says chip does not support when i try reading MCU 2M42E using MC9S12 relash cable v1 VVDI PROG. what might be the problem?thinking
Quote this message in a reply
28-08-2017, 20:12 PM,
Post: #117
RE: Vvdi prog
I think Not implement this Chip to the vvdi Up to now/Not Support
Contact the Support or Semic
Quote this message in a reply
28-08-2017, 20:19 PM,
Post: #118
RE: Vvdi prog
9s12xdg128... yes soport
use pin out corrrect... and adapter
Quote this message in a reply
29-08-2017, 09:47 AM, (This post was last modified: 29-08-2017, 10:02 AM by louis21.)
Post: #119
RE: VVDI PROG Support/Feedback Thread
(25-08-2017, 00:09 AM)rainbows528 Wrote:  Hello friend,
help me please~~
I tried to read and write Renesas V850E2 FG4-L uPD70F3580.
Both tasks were normal and the data were the same when compared.
However, the module could not be recognized when it was checked with diagnostic equipment after it was installed in the vehicle.
When I refer to the data sheet, I can confirm that "system protection functionality (SPF) has been implemented in all V850E2 / Fx4-L devices." The SPF includes a memory protection unit (MPU) and a system register protection (SRP).
Because of this, it seems that even if you write to the module, you can not recognize it. Is there a way to solve this?
Is it because I did not apply the Set Sec button on the upper right after the last write operation? Anyone who knows about this?
help me~
which module?I check if that someone has read it before.and you must have the data right?please upload.

(28-08-2017, 15:00 PM)MILITANTS Wrote:  Vvdi prog says chip does not support when i try reading MCU 2M42E using MC9S12 relash cable v1 VVDI PROG. what might be the problem?thinking
have you tried juancho18's suggestion?can read out?
Quote this message in a reply
29-08-2017, 14:19 PM,
Post: #120
RE: VVDI PROG Support/Feedback Thread
(29-08-2017, 09:47 AM)louis21 Wrote:  
(25-08-2017, 00:09 AM)rainbows528 Wrote:  Hello friend,
help me please~~
I tried to read and write Renesas V850E2 FG4-L uPD70F3580.
Both tasks were normal and the data were the same when compared.
However, the module could not be recognized when it was checked with diagnostic equipment after it was installed in the vehicle.
When I refer to the data sheet, I can confirm that "system protection functionality (SPF) has been implemented in all V850E2 / Fx4-L devices." The SPF includes a memory protection unit (MPU) and a system register protection (SRP).
Because of this, it seems that even if you write to the module, you can not recognize it. Is there a way to solve this?
Is it because I did not apply the Set Sec button on the upper right after the last write operation? Anyone who knows about this?
help me~
which module?I check if that someone has read it before.and you must have the data right?please upload.

(28-08-2017, 15:00 PM)MILITANTS Wrote:  Vvdi prog says chip does not support when i try reading MCU 2M42E using MC9S12 relash cable v1 VVDI PROG. what might be the problem?thinking
have you tried juancho18's suggestion?can read out?

hello friend.
i read renault parking sonar module.
it has v850E2 FG4L uPD70F3580
i tested working good.
read d flash. p flash. Opt0
write d flash . p flash . Opt0
working good.
But connecting car , not recognize module
why??????
all working complete.
why not recognize?

Is there another security?
I tried to read the data from the same hardware version of the module and try to replicate it.
However, all of the reading and writing operations were normal, but they did not work when connected to the vehicle. Apparently other security technologies are applied.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CGDI BMW Keytool Feedback ROD-BENDERS 71 28,463 24-03-2024, 21:11 PM
Last Post: Cerhio
  cas3 9389115 downgrade fail - vvdi keytoolplus motorsoft 2 116 14-03-2024, 10:08 AM
Last Post: sixcode
TMisubshi Need support for MH141557 immo ecu virgin file ste821 0 51 20-02-2024, 20:38 PM
Last Post: ste821
  FVDI Feedback / questions and answers klostazy 372 149,215 01-01-2024, 21:34 PM
Last Post: jansmerfowski
HPorshe 2010 Porsche panamera Continental SDI6 reading by X-Prog iii pc drhg 2 182 01-01-2024, 19:01 PM
Last Post: drhg
0Immo Vapon vp996 feedback ruisam 0 146 20-12-2023, 01:34 AM
Last Post: ruisam
XZBMW VVDI MINI KEY TOOL wiring interchange help! taisuke3 1 233 20-10-2023, 07:05 AM
Last Post: Samsara69
  Members Feedback for Autel MaxiIM IM508 / IM608 / IM608 PRO requested CATAHA 19 5,686 16-10-2023, 10:45 AM
Last Post: kiruxxx
0Immo Renolink Support/Feedback volavka 49 28,040 07-10-2023, 12:24 PM
Last Post: wauzzz
  VW PASSAT B6 NEW EMULATOR ESL FEEDBACK 12manux 6 844 05-10-2023, 10:26 AM
Last Post: 12manux

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content