Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II



Post Reply 
VVDI PROG Support/Feedback Thread
04-01-2018, 22:14 PM
Post: #151
RE: VVDI PROG Support/Feedback Thread
(04-01-2018 08:56 AM)Xhorsesupport Wrote:  Firstly,connect the device to the pc,obverse the led light,the red led should light always,the yellow led should blink.if the yellow led doesn't blink,you should change a usb port or pc to have a try.
Secondly,if the yellow led is blinking,please install the driver under the folder "driver",then reconnect USB and check the reading is ok or not

i tried on other pc but same issue itwasntme
only red light is on ,, the yellow one not blink
USB Cable and drivers are ok .. because i can detect my SN and fw version

Please help crying

Appreciated bow

DO NOT Send me Private Message asking for help ,i will just ignore you
The forum is here for this reason
gavel
Visit this user's website Find all posts by this user
Quote this message in a reply
05-01-2018, 02:57 AM
Post: #152
RE: VVDI PROG Support/Feedback Thread
(04-01-2018 22:14 PM)MEGACHIP Wrote:  
(04-01-2018 08:56 AM)Xhorsesupport Wrote:  Firstly,connect the device to the pc,obverse the led light,the red led should light always,the yellow led should blink.if the yellow led doesn't blink,you should change a usb port or pc to have a try.
Secondly,if the yellow led is blinking,please install the driver under the folder "driver",then reconnect USB and check the reading is ok or not

i tried on other pc but same issue itwasntme
only red light is on ,, the yellow one not blink
USB Cable and drivers are ok .. because i can detect my SN and fw version

Please help crying

Appreciated bow
If so,please check your pm.
Find all posts by this user
Quote this message in a reply
05-01-2018, 19:27 PM
Post: #153
RE: VVDI PROG Support/Feedback Thread
Good news for lazy peopel biggrin

vvdi prog 10 adapters for Benz ezs/eis

   

DO NOT Send me Private Message asking for help ,i will just ignore you
The forum is here for this reason
gavel
Visit this user's website Find all posts by this user
Quote this message in a reply
 Thanks given by: bawareca , daxxer
10-01-2018, 23:10 PM
Post: #154
RE: VVDI PROG Support/Feedback Thread
Hello . I Have problems with the vvdi programmer, I can't read all atmega 32,48,64 chip. Connection is correct, programmer says - check connect wire. What is it a problem.
Find all posts by this user
Quote this message in a reply
11-01-2018, 03:15 AM
Post: #155
RE: VVDI PROG Support/Feedback Thread
(10-01-2018 23:10 PM)tommaxx Wrote:  Hello . I Have problems with the vvdi programmer, I can't read all atmega 32,48,64 chip. Connection is correct, programmer says - check connect wire. What is it a problem.
1.if your mcu cable is v2,please change it to v3 following the modification in the "Connection diagram"
2.use the multimeter to test every connection point is right
3.and it's possible that chip are locked,the chip lock their communcation port,programmer can't communicate with them,so can't read.
Find all posts by this user
Quote this message in a reply
 Thanks given by: tommaxx
27-01-2018, 06:29 AM
Post: #156
RE: VVDI PROG Support/Feedback Thread
VVDI PROG latest software version V4.6.7 update

-------------------------------------
v4.6.7 (2018-01-27)
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.7 version in Doc folder
* ESW3 change Read/Write mode
+ Add 25LC010, 25LC020, 25LC040, 25LC080, 25LC160, 25LC320, 25LC640, 25LC128, 25LC256, 25LC512 options in <1-EEPROM&FLASH>-><MICROCHIP>
+ Add TC97010(CLIP) option in <1-EEPROM&FLASH>-><TOSHIBA(CLIP)>
+ Add MB91F060, MB91F062, MB91F067, MB91F575, MB91F577, MB91F578C, MB91F579C, MB91F591B, MB91F592B, MB91F594B, MB91F596B, MB91F597B,
MB91F599B, MB91F59AC, MB91F59BC options in <2-MCU>-><FYJITSU-MB91F>
+ Add MC68HC05E6 option in <2-MCU>-><MOTOROLA-MC68HC(7)05>
+ Add W203(AM29F400BB) option in <3-ECU>-><BENZ>
+ Add ME7 option in <3-ECU>-><BOSCH>
+ Add IAW 4AC.A4 option in <3-ECU>-><MAGNETI-MARELLI>
+ Add EIS-W203-1J35D(ADAPTER), EIS-W203-1J74Y(ADAPTER), EIS-W203-2J74Y(ADAPTER), EIS-W203-3J74Y(ADAPTER), EIS-W203-4J74Y(ADAPTER),
EIZ-W209-HC12(ADAPTER), EIZ-W211-HC12(ADAPTER), EIZ-W209-ST12(ADAPTER), EIZ-W211-ST12(ADAPTER), EIZ-W215-ST12(ADAPTER), EIZ-W220-ST12(ADAPTER),
EIZ-W230-ST12(ADAPTER), EIZ-W164-ST12(ADAPTER), EIZ-W169-V1-ST12(ADAPTER), EIZ_VITO_ST12(ADAPTER), EIZ_SPRINGTER(ADAPTER), EIS-W639-0L02M(ADAPTER),
EIS-W639-1L02M(ADAPTER), EIS-W639-3K85K(ADAPTER), EIS-W639-1J35D(ADAPTER), EIS-W639-4J74Y(ADAPTER), HC05E6_REMOTE(0F82B) options in <4-IMMOBILIZER>-><BENZ>
+ Add EWS3—KLINE(0D46J)_READ, EWS3—KLINE(0D46J)_WRITE options in <4-IMMOBILIZER>-><BMW>
+ Add EPICA_BCM(--2009), SAIL_IMMOBOX(--2009) option in <4-IMMOBILIZER>-><CHEVROLET> (Support read PASSWORD)
+ Add IX35(2015)(MC9S12XD256) option in <4-IMMOBILIZER>-><HYUNDAI>
+ Add OPEL_IMMOBOX(--2009) option in <4-IMMOBILIZER>-><OPEL> (Support read PASSWORD)
+ Add JETTA_IMMOBOX(--2008) option in <4-IMMOBILIZER>-><VOLKSWAGEN> (Support read PASSWORD)
+ LINGZHI_M5(2016)(MC9S12HY64) option in <5-DASHBOARD>-><DONGFENG>
+ LAVIDA_DASHBOARD(D79F3422) option in <5-DASHBOARD>-><VOLKSWAGEN>
+ VERNA(D70F3421) option in <5-DASHBOARD>-><HYUNDAI>
+ TIGGO5(MB91F594BS) option in <5-DASHBOARD>-><CHERY>
+ PRIDE option in <7-AIRBAG>-><OTHERS>


Attached File(s)
VVDI PROG V4.6.7 download link.txt
File Type: .txt
Downloaded: 28 times
Size: 87 bytes

Find all posts by this user
Quote this message in a reply
 Thanks given by: amaflo , raffy haddad , daxxer
05-02-2018, 16:02 PM
Post: #157
RE: VVDI PROG Support/Feedback Thread
What is the best place to buy vvdi2?
Find all posts by this user
Quote this message in a reply
14-02-2018, 10:58 AM
Post: #158
RE: VVDI PROG Support/Feedback Thread
(05-02-2018 16:02 PM)Tombo Wrote:  What is the best place to buy vvdi2?

http://www.vvdishop.com/wholesale/vvdi2-...ammer.html
Find all posts by this user
Quote this message in a reply
14-02-2018, 22:00 PM
Post: #159
RE: VVDI PROG Support/Feedback Thread
Hi All
does vvdi prog work well with Renesas?
Find all posts by this user
Quote this message in a reply
24-02-2018, 07:55 AM
Post: #160
RE: VVDI PROG Support/Feedback Thread
Yes,did you meet problem?
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  CGDI BMW Keytool Feedback in ROD-BENDERS 11 748 Today 05:30 AM
Last Post: ahmadarifai
  Ezs 204 vvdi in dasdiagnosis 0 48 Yesterday 21:24 PM
Last Post: dasdiagnosis
  FVDI Feedback / questions and answers in klostazy 294 31,024 17-04-2018 11:02 AM
Last Post: xander20005
  Key Master/Key Master DP FEEDBACK in mar.wo 14 1,307 13-04-2018 09:25 AM
Last Post: mar.wo
  Smok J-TAG Support/Feedback Thread in volavka 10 3,221 04-04-2018 13:46 PM
Last Post: rainbows528
LFord Thread Modes FORD FOCUS 2007 SYNC Dash ECU PLEASE HELP in maamar82 8 244 01-04-2018 17:17 PM
Last Post: casper1986
  VVDI MB BGA vs CGDI Prog MB in doordie40 2 105 29-03-2018 10:58 AM
Last Post: volavka
0Immo Xhorse vvdi2 tool Technical Support & Feedback in volavka 134 22,217 28-03-2018 22:43 PM
Last Post: Silva1337
YTMercedes CGDI MB BenzMonster key tool feedback in obdtool 106 11,694 28-03-2018 09:43 AM
Last Post: Dave1989
0Immo X-100 PRO Key Programming FeedBack in ETPerformance 74 15,139 22-03-2018 11:30 AM
Last Post: TomSoyer

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content