[Balage]

MCP5604P  JTAG protocol

Hi!
It doesn't read ID.

[yellowstilo]

Hello, i just received my VVDI Prog with Bosch adapter cable, reading a BMW MEVD17.2.3 ecu should be possible but the tool does not read the chip - it keeps trying up to 97% (with green led most of the time) but at the end it gives me a 3 network connection error.
the red led lights constantly, the yellow led blinks rapidly and the green led lights at the moment when the tool tries to read the TC1793 chip but stops when 97% connecting is reached...
I double-checked the ecu pinout many times, it is the same as used by other tools.
I tried with a direct LAN connection instead of WIFI but that makes no difference....
So i'm disappointed  the tool does not work with the Bosch adapter cable on a BMW MEVD17.2.3 ecu as i especially bought it for this function, any suggestions from VVDI/Xhorse support to solve this problem ?

BTW- the AT200 tool works ok on this ecu using the same connections so please check how they do it...

thank you for any help !

[yellowstilo]

could someone post a working link for older VVDI Prog 5.1.3 software ? According to the support employee this maybe could solve my problem of not connecting with a BMW i8 MEVD17.2.3 ecu using the Bosch adapter cable...
He could not help me because of working from home due to Covid restrictions in China....
I would like to try this but can't find a working link anywhere...
thank you for any help !

[Vojno]

could someone post a working link for older VVDI Prog 5.1.3 software ? According to the support employee this maybe could solve my problem of not connecting with a BMW i8  MEVD17.2.3 ecu using the Bosch adapter cable...
He could not help me because of working from home due to Covid restrictions in China....
I would like to try this but can't find a working link anywhere...
thank you for any help !

In my link, you find this version also:
https://cartechnology.co.uk/showthread.p...#pid488988

[ka_rai]

hi friends

i need read RH850 R7F701042

but this micro have 80 pins
in diagram from vvdi i not found wire color from FLMD0 , in manual micro RH850 have lot of more pins ...

i found FMLD1 green but nothing about FMLD0

anybody know color from this pin FMLD0 ?

thanks

[slaw1971]

Hello

I have vvdi prog for several years now
great programmer - but I've already replaced the motherboard once - it didn't read BMW CAS (motorolla). a year has passed - and again the same ... again the problem with reading the motorolla. Is there a solution so that I don't have to replace the motherboard again?
best regards
Sławek

[jokeriphone]

Hello

I am trying to read TC233-32F P-Flash and D-Flash today via JTAG. Read and Verify ok but writing not posssible.VVDI not erase the chip.
Version 523

[ka_rai]

Hello

I am trying to read TC233-32F P-Flash and D-Flash today via JTAG. Read and Verify ok but writing not posssible.VVDI not erase the chip.
Version 523

you test push erase buton before write data ?

[jokeriphone]

Yes of course I am push erase button before writing data.Erasing ok in the program and after writing no verification.I am check the chip not blank after I am erase the chip

[Mwahab]

I use vvdi prog most of the time despite having 2 other programmers.
This time it disappointed me, It didn’t erase mileage on 35080V6 E series cluster, however HEXPROG did it in 7 seconds.