Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VVDI PROG Support/Feedback Thread
08-09-2016, 08:31 AM,
Post: #21
|
|||
|
|||
RE: VVDI Prog - Your observations and opinions.
I wrote to Samic before 10 days and still no answer.
|
|||
14-09-2016, 05:12 AM,
Post: #22
|
|||
|
|||
RE: VVDI Prog - Your observations and opinions.
Have problem writing on 080dowq
doesnot save [2016-09-14 01:09:18] : Initialization device... [2016-09-14 01:09:18] : Initialization success! [2016-09-14 01:09:19] : Initialization chip... [2016-09-14 01:09:19] : Start communication... [2016-09-14 01:09:19] : Write length:0x400 [2016-09-14 01:09:19] : Writting...(0%) [2016-09-14 01:09:20] : Writting...(12%) [2016-09-14 01:09:20] : Writting...(25%) [2016-09-14 01:09:20] : Writting...(37%) [2016-09-14 01:09:21] : Writting...(50%) [2016-09-14 01:09:21] : Writting...(62%) [2016-09-14 01:09:21] : Writting...(75%) [2016-09-14 01:09:21] : Writting...(87%) [2016-09-14 01:09:21] : Writting...(100%) [2016-09-14 01:09:21] : Read length:0x400 [2016-09-14 01:09:21] : Checking...(0%) [2016-09-14 01:09:21] : Checking...(100%) [2016-09-14 01:09:22] : Check Error,please re-operation |
|||
14-09-2016, 15:59 PM,
Post: #23
|
|||
|
|||
RE: VVDI Prog - Your observations and opinions.
(14-09-2016, 05:12 AM)Levanime Wrote: Have problem writing on 080dowq Try to erase it before writing.. »» Always use ---> and ---> if my post was helpful... ««
|
|||
20-09-2016, 09:32 AM,
Post: #24
|
|||
|
|||
RE: VVDI Prog - Your observations and opinions.
M35080 from E65 dashboard cannot erase.
I did-it on r270 and it is working. So it does not erase all 35080.... And is there any one selling VVDI tools on EU ? |
|||
26-09-2016, 04:49 AM,
Post: #25
|
|||
|
|||
RE: VVDI Prog - Your observations and opinions.
VVDI PROG latest software version V4.5.0 update
------------------------------------- v4.5.0 (2016-09-26) * This version DON't need update firmware * Fix some bugs + Add VVDI PROG USER MUNUAL 4.5.0 version in Doc folder * Fix ATMEGAxx8 diagram error problem * Change D70f3624 diagram(add QFP64 package) + Add ATMEGA48P,ATMEGA48PB, ATMEGA88P,ATMEGA88PB, ATMEGA163,ATMEGA164, ATMEGA164P, ATMEGA168P,ATMEGA168PB, ATMEGA169P,ATMEGA323,ATMEGA324, ATMEGA324P, ATMEGA324PB, ATMEGA325, ATMEGA325P, ATMEGA3250, ATMEGA3250P, ATMEGA328, ATMEGA328P, ATMEGA328PB, ATMEGA329, ATMEGA329P,ATMEGA3290, ATMEGA3290P,ATMEGA644, ATMEGA644P, ATMEGA645, ATMEGA645P, ATMEGA6450, ATMEGA6450P, ATMEGA649, ATMEGA649P, ATMEGA6490, ATMEGA6490P, ATMEGA103, ATMEGA1284, ATMEGA1284P optionsin <2-MCU>-><ATMEL-ATMEGA_XXXX> + Add HC908GZ8,HC908GZ16, HC908GZ32,HC908GZ48,HC908GZ60,HC908GZ8_SECURED,HC9 08GZ16_SECURED, HC908GZ32_SECURED,HC908GZ48_SECURED,HC908GZ60_SECU RED options in <2-MCU>-><MOTOROLA-MC68HC(9)08> + Add MC912DT128_UNSECURED,MC912DT128A_UNSECURED,MC912DT 128P_UNSECURED,MC912DT128_SECURED, MC912DT128A_SECURED,MC912DT128P_SECURED optionsin <2-MCU>-><MOTOROLA-MC68HC(9)12> + Add MT20U2-MC912DT128P option in <3-ECU>-><DELPHI> + Add BESTURN-B90-BCM option in <4-IMMOBILIZER>-><FAW> + Add FENGGUANG(2016) option in <5-DASHBORAD>-><DONGFENG> + Add XC60-HIGH-EQUIPPED(2014) option in <5-DASHBORAD>-><VOLVO> Notes: keep using latest software version,find bugs/not work well post here/PM to Samic |