Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



MT401 experience feedback
11-11-2017, 08:26 AM,
Post: #11
RE: MT401 experience feedback
Hi again, i destroyed a mercedes A class W169 of 2006 with my digiprog3, there was some blogs here which say if you program w169 cluster with clip adapter or with st60 cable to 999999, just to block the ezs, put in the car and after 2 to 5 minutes with open ignition and than remove it again and reprogram again to the km you need , it will work, but not in my case, the cluster was freeze at 999999 even ti show the right km at digiprog and other tools but the display was freeze at 999999 even on table workbench, so after my first success with my mt401 trying at a w245, which is the same as w169, i try at this dissapointed client, so it work, it fixed the cluster through obd port, there was no solution allover the internet about that cluster, believe me, i searched a lot, this tool worth its cost, it is a great tool
one more time
mercedes A class w169 km ok, and fix the demaged cluster too
thanks one more time obdprog
Quote this message in a reply
[+] 2 users say Thank You to zgjana for this post
12-11-2017, 12:11 PM,
Post: #12
RE: MT401 experience feedback
Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ???
Quote this message in a reply
[+] 1 user says Thank You to Stig33 for this post
13-11-2017, 19:57 PM,
Post: #13
RE: MT401 experience feedback
(12-11-2017, 12:11 PM)Stig33 Wrote:  Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ???

hi, if you mean this cluster https://www.youtube.com/watch?v=6KJUQKFpLAc it work for sure my friend
Quote this message in a reply
14-11-2017, 09:05 AM, (This post was last modified: 15-11-2017, 03:42 AM by obdprogwendy.)
Post: #14
RE: MT401 experience feedback
(12-11-2017, 12:11 PM)Stig33 Wrote:  Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ???

Passat
NEC+24C32
Read write mileage
Read EEPROM
Write EEPROM
NEC+24C64 VDO -12
NEC+24C64 color meter(type 1)
Read EEPROM
Write EEPROM
Read write mileage
NEC+24C64 color meter(type 2)
Read EEPROM
Write EEPROM
Read write mileage

NEC+24C64 13- white meter
Read EEPROM
Write EEPROM
Read write mileage
VDO K line

2014 passsat is supported !!!!!!!
Quote this message in a reply
21-11-2017, 19:11 PM,
Post: #15
RE: MT401 experience feedback
(14-11-2017, 09:05 AM)obdprogwendy Wrote:  
(12-11-2017, 12:11 PM)Stig33 Wrote:  Km correction is working with tool on VW Passat B7 2014.10 VDO, Coninental ???

Passat
NEC+24C32
Read write mileage
Read EEPROM
Write EEPROM
NEC+24C64 VDO -12
NEC+24C64 color meter(type 1)
Read EEPROM
Write EEPROM
Read write mileage
NEC+24C64 color meter(type 2)
Read EEPROM
Write EEPROM
Read write mileage

NEC+24C64 13- white meter
Read EEPROM
Write EEPROM
Read write mileage
VDO K line

2014 passsat is supported !!!!!!!

Unfortunately this tool don't working with this car.....I'm sad..... cryingcrying


Attached Files Thumbnail(s)
   
Quote this message in a reply
22-11-2017, 10:18 AM,
Post: #16
RE: MT401 experience feedback
DONT BUY THIS SHIT TOOL!

i got vag one mt006

golf 5 2007 mileage is ok, to read pin must use touran menu

oktavia 3 2013 year , vdo dash, not working, it brings you back to main menu
golf 7 2014.6 same thing!!!!!!!!

for vag only its nothing more than vag k+can 2,0 super vag!
waste of moneys!!
really dont buy it if you want to do newer cars, get something else!!!


my 2 cents
its doesnt even worth sending it back
cheers
BP
Quote this message in a reply
[+] 1 user says Thank You to blackpirate for this post
30-11-2017, 06:55 AM,
Post: #17
RE: MT401 experience feedback
You have to tighten your buttocks every time you use
what to say to your friend or customer if the car does not start
Visit this user's website
Quote this message in a reply
14-12-2017, 08:25 AM, (This post was last modified: 14-12-2017, 08:27 AM by zgjana.)
Post: #18
RE: MT401 experience feedback
(22-11-2017, 10:18 AM)blackpirate Wrote:  DONT BUY THIS SHIT TOOL!

i got vag one mt006

golf 5 2007 mileage is ok, to read pin must use touran menu

oktavia 3 2013 year , vdo dash, not working, it brings you back to main menu
golf 7 2014.6 same thing!!!!!!!!

for vag only its nothing more than vag k+can 2,0 super vag!
waste of moneys!!
really dont buy it if you want to do newer cars, get something else!!!


my 2 cents
its doesnt even worth sending it back
cheers
BP





maybe i share the same experience with you for MT006 , and probably you are right, but this one is a thread about MT401 and i have respect for this tool, so find the write place for MT006 and give your opinion or your feedback, and maybe i will follow you, do you own a MT401 ?
Quote this message in a reply
14-12-2017, 18:16 PM,
Post: #19
RE: MT401 experience feedback
For me
i not play wiht this tool
is real fake to fake
Visit this user's website
Quote this message in a reply
14-12-2017, 18:36 PM,
Post: #20
RE: MT401 experience feedback
(14-12-2017, 18:16 PM)forkade Wrote:  For me
i not play wiht this tool
is real fake to fake
not fake but not as good as m tool

Sent from my SM-G935F using Tapatalk
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
0Dash X-100 PRO Mileage Correction FeedBack ETPerformance 233 80,266 16-07-2019, 16:38 PM
Last Post: Dgordg
  Orange5 Clone [Support/Feedback/Rework/Calculators] ROD-BENDERS 48 2,385 10-07-2019, 12:29 PM
Last Post: joaosom
0Dash IProg+ & IProgPro suppot/Feedback thread volavka 142 76,337 09-07-2019, 16:43 PM
Last Post: hcip
0Dash X-tool suppot/Feedback/backup thread volavka 216 62,778 27-06-2019, 07:13 AM
Last Post: michelespl
0Dash Smok UHDS Support/Feedback/Backup Thread volavka 130 28,412 27-06-2019, 07:10 AM
Last Post: michelespl
0Dash MTool Mileage Correction suppot/Feedback thread volavka 51 23,364 19-05-2019, 16:00 PM
Last Post: Arvind
0Dash New CLONE Smelecom DSP3 feedback forkade 16 6,491 13-12-2018, 10:03 AM
Last Post: Master_Heinrich
  SMOK(clone) X-can(vag,chrysler,mercedes,opel,ford,volvo,psa) EXPERIENCE grmsek.damjan 2 4,818 13-10-2018, 09:28 AM
Last Post: grmsek.damjan
0Dash OBDSTAR H110 VAG FEEDBACK smart057 9 1,701 11-06-2018, 07:23 AM
Last Post: erich.hai
YTMercedes Feedback about WEIXY Electronic Canfilter volavka 1 1,617 10-03-2018, 18:34 PM
Last Post: David Sun

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content