[kingdomdz]

Hi
Please i need clear for Peugeot 208
98 127 133 80
0 285 012 924
here is the dump file extracted

[dragon100]

Your cleared tested file, pass in pm.

[kingdomdz]

Your cleared tested file, pass in pm.

thanks for the Clear
i got error "verify error" every time when i try to write
should i remove the chip from the board ?

[dragon100]

Always, desolder, read, clear file, write cleared file and solder back.

[kingdomdz]

Always, desolder, read, clear file, write cleared file and solder back.

thanks for the advice
after hard fight i finally desolder the chip. but when i try to read it give file full of zero always

[dragon100]

Clean legs eeprom and check if good connection clip on eeprom ...

[kingdomdz]

Same issue always file full of zeros the chip is 95320

[dragon100]

Maybe eeprom damage, too hot ..., write clear file, then read and verify ...

[kingdomdz]

Message verify error after writing the clear file then no change made.
i guess i need to replace the eeprom but i have only 95160

[dragon100]

No need 95320 ...