[perchow]

Hi all. I'm totally new in to renault.
I got a renault trafic 1.9 dci 2002.
It does not start and no communications is possible with ecu.

Im thinking about to buy used on ebay,
will it need to be reprogrammed? is it possible to code used ecu to other trafic?

if its possible, what interface and software do I need?

Thanks for your time!

/Daniel

[Crysis05]

To virgin File Progrrame eeprom 95160

pass: PM

[rightpcb]

Check underbonnet engine loom multiplug

[perchow]

To virgin File Progrrame eeprom 95160

pass: PM

Hello!
Thanks for your help, May I program it with KESS?
Or only x-prog will do the job?
Thanks!

---

Check underbonnet engine loom multiplug

Hello! I did check cables, all CANS and power from crash relay is ok!

[perchow]

Ok guys, really need help

I changed DDE - ECM - ignition

Still does not start!! and still no communication from OBD to dde all other modules does work..

I checked 12v from crashrelay, is OK
CAN-HI CAN-LOW also OK from obd to dde.


I have no more ideas, please help

Edit:
Ok this is driving me nuts. As soon I connect 12v feed to ecu relay then 12v goes away.
when disconnected there is 12v or actually 11.6volt

why does it goes to 0.5v when connected?

Thanks