Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford IDS 107.1
19-09-2017, 23:04 PM,
Post: #1
|
|||
|
|||
Ford IDS 107.1
Hello, I noticed ford ids 107.1 is available on the following page,
https://www.fordtechservice.dealerconnec...roduct=IDS Does anyone have any success of it working? I tried to install it on my working vmware 106.06 machine and it will not load, it removes the old license and says i need to obtain a new license. Thank you. |
|||
20-09-2017, 04:02 AM,
(This post was last modified: 20-09-2017, 04:03 AM by mattydr67.)
Post: #2
|
|||
|
|||
RE: Ford IDS 107.1
The v107.01 "killed" the old activation/patch
It needs a new activation/patch. Good luck |
|||
25-09-2017, 07:46 AM,
Post: #3
|
|||
|
|||
RE: Ford IDS 107.1
Also no calibration files available for it.
|
|||
11-10-2017, 12:48 PM,
Post: #4
|
|||
|
|||
RE: Ford IDS 107.1
A couple of people are selling this on ebay and on garageforum claiming they have it working. Do you people reckon these are scams or is it worth a punt?
Cheers |
|||
30-10-2017, 18:53 PM,
Post: #5
|
|||
|
|||
RE: Ford IDS 107.1
A trial period is there?
|
|||
11-11-2017, 21:16 PM,
Post: #6
|
|||
|
|||
RE: Ford IDS 107.1
HAVE A SERIAL CHINESE VCM2 31605352 VERSION 2.4.73.49 AUGUST 8 2017
THERE IS SOME CLONE IDS thanks |
|||
22-11-2017, 21:22 PM,
Post: #7
|
|||
|
|||
RE: Ford IDS 107.1
What gives? the license is?
|
|||
08-12-2017, 11:28 AM,
Post: #8
|
|||
|
|||
RE: Ford IDS 107.1
After installation of IDS SW V107, Firmware update starts and finish successful. When I connect the car, I can hear the relays clicking from the VCM-II clone, but no communication with car possible. With old IDS SW and old Firmware communication with car possible. Can anyone of you help?
|
|||
08-12-2017, 19:37 PM,
Post: #9
|
|||
|
|||
RE: Ford IDS 107.1
(08-12-2017, 11:28 AM)cardev Wrote: After installation of IDS SW V107, Firmware update starts and finish successful. When I connect the car, I can hear the relays clicking from the VCM-II clone, but no communication with car possible. With old IDS SW and old Firmware communication with car possible. Can anyone of you help? hi friend how u make 107.01 run... can share |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Ford IDS 130.01+Upd 130.05, FDRS 40.4.1, FJDS 130.01+Upd 130.05 + PATCH 1.1.3.1 | DoZe | 57 | 12,577 |
Yesterday, 01:09 AM Last Post: DoZe |
|
Tis Ford kuga | andy71 | 1 | 49 |
15-04-2024, 15:31 PM Last Post: pupu144 |
|
License for Ford IDS FJDS FRDS until 2025. | blerim shehi | 17 | 1,721 |
12-04-2024, 06:50 AM Last Post: petr78rus |
|
Ford F150 Oil Reset Tool for Use with VCM2 | LUTHOR | 2 | 83 |
11-04-2024, 11:09 AM Last Post: LUTHOR |
|
Ford Fiesta ABS Connector Schematic | carradio2001 | 0 | 47 |
30-03-2024, 09:05 AM Last Post: carradio2001 |
|
ford transit bcm Bk2t-14b476-BU - clone / virgin | bboctavian | 1 | 117 |
28-03-2024, 13:45 PM Last Post: bboctavian |
|
Ford S-MAX 2006 | gizmo220 | 1 | 63 |
25-03-2024, 22:32 PM Last Post: toutou_gsm |
|
Need Wiring Diagram Ford Transit 2.0 | ToolSet | 4 | 186 |
06-03-2024, 21:25 PM Last Post: ToolSet |
|
FORD MONDEO VBF files | rasmoka | 1 | 163 |
20-02-2024, 18:06 PM Last Post: fordmidabil |
|
2012 Ford fusion calibration file | koziol | 2 | 95 |
15-02-2024, 17:02 PM Last Post: pupu144 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content