Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



[TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
30-09-2017, 07:42 AM, (This post was last modified: 31-01-2019, 19:00 PM by mrle9.)
Post: #1
ZTAudi  [TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Hi ,

After few research I found the process for unlock Needle Sweep (aka Needle Staging) and LapTimer in Dashboard for 8P and 8J with White FIS.

No need to replace eeprom software by a S3 software because function are present but disable in all white FIS dashboard.

This mods was succesfully tested on all white FIS dashboard with part number below :

A3 Dashboard (8P) (Dash with eeprom 24c32 and Micronas CDC3217G) :
8p0920931
8p0920932
8p0920901
8p0920983 (UK)

TT Dashboard (8J) :
8J0920981 (UK)

You need :

1x i2c programmer like CH341A , ezp2010 , minipro , ...

1x SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit

-----------------

Don't forget to add me Thanks and Reputation if you enjoy my job handshake

Password is : lapneedlebymrle9

rock

Bye

EDIT About Boost & Oil Temp function :

As I said in this thread I well know the bit address  for adding boost and oil temp but I didn't found it myself,
this information was given to me from an user that make business and ask me to not release this information to public . nospeak
If It was found by myself I would published this information but it was not the case and i respect the deal made with the user. handshake  

Don't lost your time to ask me in this thread or by Private Message i will not answer. nospeak

If you want it you will need to find it by yourself or wait this information by another user. speechless


Attached Files
Unlock_Needle_Swipe_&_LapTimer_on_White_8P_or_8J_Dashboard_Link.txt
File Type: .txt
Downloaded: 233 times
Size: 72 bytes


Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Reputation: +4 - cristypuff [+1] , ristici [+1] , adven [+1] , oniuks [+1]
Quote this message in a reply
[+] 21 users say Thank You to mrle9 for this post
30-09-2017, 09:51 AM,
Post: #2
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Hello does not let you activate it with vag / com? or is the software in the frame incompatible?
Quote this message in a reply
30-09-2017, 10:04 AM,
Post: #3
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
(30-09-2017, 09:51 AM)leonfrrojito Wrote:  Hello does not let you activate it with vag / com? or is the software in the frame incompatible?

Not possible as default to activate these function by vag-com for standard 8P or 8J cars.
As default it is only possible to have these function on S3 or RS3 dashboard.

These function are present in the eeprom software but they are locked.

This mods allow you to unlock these function in eeprom , and after you will be able to activate function by vag-com or directly in eeprom as explain in the tutorial.

Bye

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
30-09-2017, 10:19 AM,
Post: #4
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
I already understood I just saw the tutorial sorry I did not know that the function blocked the eeprom
Quote this message in a reply
30-09-2017, 10:49 AM,
Post: #5
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
(30-09-2017, 10:19 AM)leonfrrojito Wrote:  I already understood I just saw the tutorial sorry I did not know that the function blocked the eeprom

It´s like on passat 3c dash with vdo Nec 24c32/64 dashes. on CC you can activate it on normal dash you must edit eeprom that staging work

KTAG 7.026 EU - KESS 5.017/2.47 EU - MPPS V18 EU - FGTECH EU
XCAN CLONE - CARPROG REWORKED - VCDS/OPCOM HQ - KESS/KTAG REWORKED
BDM ADAPTERS - BDM/BOOTFRAME HQ - BOOTPINS AND MANY MORE

>>"CONNECTION WIZARD" OBD BREAKOUT BOX WITH INTEGRATED COIL<<
ASK ME IN PM FOR INFOS AND SPECIAL PRICES
Quote this message in a reply
30-09-2017, 19:09 PM,
Post: #6
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Anyone here WHO Know the offsets from the red clusters?
There it is also possible..
Quote this message in a reply
01-10-2017, 05:23 AM,
Post: #7
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
(30-09-2017, 19:09 PM)robot1 Wrote:  Anyone here WHO Know the offsets from the red clusters?
There it is also possible..

in the red box it was not compatible it was only in white mos I hope to help you
Quote this message in a reply
01-10-2017, 08:43 AM,
Post: #8
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Needle Sweep exist since 2008 on S3 with red FIS dashboard

example : https://www.youtube.com/watch?v=TfC24YQOcsE

I never tried but I think it is possible too get this on some red FIS after 2008 ...

if hardware is the same as white FIS (eeprom 24C32 with micronas 3217G ) ,
I am pretty sure that the software will be the same too (just screen color change and the management in the software)

If you have S3 dump of red FIS , share it and I will have a look .

Bye

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
01-10-2017, 21:26 PM,
Post: #9
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
First, write this instrucions in the eeprom, and after use vagcom?
Quote this message in a reply
02-10-2017, 16:14 PM, (This post was last modified: 02-10-2017, 16:16 PM by mrle9.)
Post: #10
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Yes for unlock function you need to change bit in eeprom and
you can after use vag-com for activate ,
or as explain in tutorial ,
you can also activate these function directly in the eeprom by change other bit and vag-com will be not needed after because the activation process is the same as the vag-com will do wink

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Reputation: +1 - dj_jormi [+1]
Quote this message in a reply
[+] 1 user says Thank You to mrle9 for this post


Possibly Related Threads...
Thread Author Replies Views Last Post
0Dash Dashboard Flash Backup Files collection volavka 19 4,595 Yesterday, 10:37 AM
Last Post: kantusjack
ZTAudi A6 C6 needle sweep matuuu 0 51 16-03-2019, 17:17 PM
Last Post: matuuu
  Swap Audi TT Dashboard drjb 0 97 28-02-2019, 17:47 PM
Last Post: drjb
VToyota Solved ✔ 2005 land cruiser dashboard mileage want change pal006a 7 218 23-02-2019, 07:28 AM
Last Post: pal006a
ZVW Golf 5 2009 VDO Dashboard dead (32pin) midnight_man 1 148 09-02-2019, 00:43 AM
Last Post: robot1
ZVW Honda Varadero 2001 dashboard damaged - pinout krepsior 2 1,372 08-02-2019, 18:42 PM
Last Post: raffy haddad
  dashboard huge jumper & power pinout rinaprasant 3 279 29-01-2019, 13:54 PM
Last Post: raffy haddad
  help dashboard peugeot boxer ------kms davidgj78 2 175 18-01-2019, 11:30 AM
Last Post: cubica
WKIA KIA Sportage 2012 Dashboard by CAN FVDI 2018 magdex 0 175 03-01-2019, 21:36 PM
Last Post: magdex
ZTAudi Set up DASHBOARD Audi S3 barto39 18 689 31-12-2018, 17:33 PM
Last Post: 23Andi23

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content