Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



[TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
13-01-2018, 16:12 PM, (This post was last modified: 13-01-2018, 18:00 PM by Clusters.)
Post: #11
ZTAudi  RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Hello, sorry, can you help me download the file that is in attach, i dont know the reason, but i cant download it.
if it is possible, can you send me the file via email

Rule 5 : Do not post email addresses, website URLs, Skype, phone numbers .etc in Thread/Post or signatures.

Thanks, Admin


Thanks a lot!
Happy new year!)))

(30-09-2017, 07:42 AM)mrle9 Wrote:  Hi ,

After few research I found the process for unlock Needle Sweep (aka Needle Staging) and LapTimer in Dashboard for 8P and 8J with White FIS.

No need to replace eeprom software by a S3 software because function are present but disable in all white FIS dashboard.

This mods was succesfully tested on all white FIS dashboard with part number below :

A3 Dashboard (8P) :
8p0920931
8p0920932
8p0920901
8p0920983 (UK)

TT Dashboard (8J) :
8J0920981 (UK)

You need :

1x i2c programmer like CH341A , ezp2010 , minipro , ...

1x SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit

-----------------

Don't forget to add me Thanks and Reputation if you enjoy my job handshake

Password is : lapneedlebymrle9

rock

Bye
Reputation: +1 - ads05 [+1]
Quote this message in a reply
[+] 1 user says Thank You to DotG for this post
13-01-2018, 20:41 PM, (This post was last modified: 13-01-2018, 20:46 PM by Oski.)
Post: #12
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
@mrle9: what do you mean by writing "activate bit"? At the hex60 I have value 92 and hex61 value 5A
Quote this message in a reply
16-01-2018, 19:50 PM, (This post was last modified: 17-01-2018, 11:44 AM by mrle9.)
Post: #13
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
By activate bit i mean change binary code of bit from 0 to 1

but if you don't know what I mean the simple way is to use the program Hex Rechner linked in my file .

- Download from the link i wrote in my file the program Hex Rechner V0.2 ,

- start it and put your hexa address (ex: 92) in the field Hex and after check boxes for the needed bit for activate function,

- Do do the same for the second address for other function wink

Bye

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
16-01-2018, 20:08 PM,
Post: #14
Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Thanks for that. Ill give it a try and post results.


Wysłane z iPhone za pomocą Tapatalk
Quote this message in a reply
17-01-2018, 19:34 PM,
Post: #15
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Just tested it. Needle sweep works, laptimer doesn't. Changed values at 60 and 61 as described in your tutorial. When byte 5 in 60 is activated I get safe on the dash, and mileage goes up by 20.000miles.
Quote this message in a reply
19-01-2018, 17:01 PM,
Post: #16
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
What is the part number of your dashboard ?

Is it a white FIS dashboard ?

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
19-01-2018, 17:19 PM, (This post was last modified: 19-01-2018, 17:25 PM by Oski.)
Post: #17
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
8P0 920 982 H (UK), white dash 2012. I can drop you my dump if you want.
Quote this message in a reply
19-01-2018, 19:24 PM, (This post was last modified: 20-01-2018, 08:47 AM by mrle9.)
Post: #18
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Yes please post your dump and i will try tomorrow on my bench

EDIT: but I think something goes wrong and you didn't wrote fine your dump on the dash

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
20-01-2018, 15:10 PM, (This post was last modified: 20-01-2018, 15:40 PM by Oski.)
Post: #19
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
I just attached my ori dump. I increased value of cell 60 by hex20 and cell 61 by 4. Bit 5 = 32 dec/20hex, bit 2 = 4hex/dec


Attached Files
Ori.rar
File Type: .rar
Downloaded: 22 times
Size: 1.48 KB

Quote this message in a reply
20-01-2018, 16:36 PM,
Post: #20
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Not tested yet on bench but from your dump for apply mods

00000060 : original value is 92 and need to become B2
00000061 : orginal value is 5A and need to become 5E

Is it what you wrote ?

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
ZTAudi Audi A4 B7 RB8 virgin Dashboard?? Flaco83 2 136 12-06-2019, 12:40 PM
Last Post: Flaco83
HVolvo Solved ✔ Volvo xc90 dashboard pinout 1jtune1 0 107 11-06-2019, 18:24 PM
Last Post: 1jtune1
VLexus Lexus RX350 2009 dashboard dump needed Ringo24 0 287 25-05-2019, 18:08 PM
Last Post: Ringo24
0Dash Dashboard Flash Backup Files collection volavka 22 6,484 21-05-2019, 10:52 AM
Last Post: tomi3108
YTMercedes mercedes mileage dashboard Kle 7 351 16-05-2019, 13:33 PM
Last Post: evss
LMazda 2016 Mazda 3 dashboard eeprom piotrekpiec 0 214 13-05-2019, 15:15 PM
Last Post: piotrekpiec
XZBMW Correct Dashboard BMW i3 f20uk 0 146 07-05-2019, 17:04 PM
Last Post: f20uk
  Renault Laguna3 dashboard time problem patvaros87 0 118 02-04-2019, 05:34 AM
Last Post: patvaros87
ZVW Golf 5 needle sweep (eeprom file) diagspeed 1 200 26-03-2019, 22:54 PM
Last Post: robot1
ZTAudi A6 C6 needle sweep matuuu 0 113 16-03-2019, 17:17 PM
Last Post: matuuu

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content