Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

[TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
13-01-2018, 16:12 PM, (This post was last modified: 13-01-2018, 18:00 PM by Clusters.)
Post: #11
ZTAudi  RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Hello, sorry, can you help me download the file that is in attach, i dont know the reason, but i cant download it.
if it is possible, can you send me the file via email

Rule 5 : Do not post email addresses, website URLs, Skype, phone numbers .etc in Thread/Post or signatures.

Thanks, Admin


Thanks a lot!
Happy new year!)))

(30-09-2017, 07:42 AM)mrle9 Wrote:  Hi ,

After few research I found the process for unlock Needle Sweep (aka Needle Staging) and LapTimer in Dashboard for 8P and 8J with White FIS.

No need to replace eeprom software by a S3 software because function are present but disable in all white FIS dashboard.

This mods was succesfully tested on all white FIS dashboard with part number below :

A3 Dashboard (8P) :
8p0920931
8p0920932
8p0920901
8p0920983 (UK)

TT Dashboard (8J) :
8J0920981 (UK)

You need :

1x i2c programmer like CH341A , ezp2010 , minipro , ...

1x SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit

-----------------

Don't forget to add me Thanks and Reputation if you enjoy my job handshake

Password is : lapneedlebymrle9

rock

Bye
Quote this message in a reply
[+] 1 user says Thank You to DotG for this post
13-01-2018, 20:41 PM, (This post was last modified: 13-01-2018, 20:46 PM by Oski.)
Post: #12
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
@mrle9: what do you mean by writing "activate bit"? At the hex60 I have value 92 and hex61 value 5A
Quote this message in a reply
16-01-2018, 19:50 PM, (This post was last modified: 17-01-2018, 11:44 AM by mrle9.)
Post: #13
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
By activate bit i mean change binary code of bit from 0 to 1

but if you don't know what I mean the simple way is to use the program Hex Rechner linked in my file .

- Download from the link i wrote in my file the program Hex Rechner V0.2 ,

- start it and put your hexa address (ex: 92) in the field Hex and after check boxes for the needed bit for activate function,

- Do do the same for the second address for other function wink

Bye

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
16-01-2018, 20:08 PM,
Post: #14
Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Thanks for that. Ill give it a try and post results.


Wysłane z iPhone za pomocą Tapatalk
Quote this message in a reply
17-01-2018, 19:34 PM,
Post: #15
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Just tested it. Needle sweep works, laptimer doesn't. Changed values at 60 and 61 as described in your tutorial. When byte 5 in 60 is activated I get safe on the dash, and mileage goes up by 20.000miles.
Quote this message in a reply
19-01-2018, 17:01 PM,
Post: #16
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
What is the part number of your dashboard ?

Is it a white FIS dashboard ?

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
19-01-2018, 17:19 PM, (This post was last modified: 19-01-2018, 17:25 PM by Oski.)
Post: #17
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
8P0 920 982 H (UK), white dash 2012. I can drop you my dump if you want.
Quote this message in a reply
19-01-2018, 19:24 PM, (This post was last modified: 20-01-2018, 08:47 AM by mrle9.)
Post: #18
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Yes please post your dump and i will try tomorrow on my bench

EDIT: but I think something goes wrong and you didn't wrote fine your dump on the dash

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply
20-01-2018, 15:10 PM, (This post was last modified: 20-01-2018, 15:40 PM by Oski.)
Post: #19
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
I just attached my ori dump. I increased value of cell 60 by hex20 and cell 61 by 4. Bit 5 = 32 dec/20hex, bit 2 = 4hex/dec


Attached Files
Ori.rar
File Type: .rar
Downloaded: 34 times
Size: 1.48 KB

Quote this message in a reply
20-01-2018, 16:36 PM,
Post: #20
RE: Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Not tested yet on bench but from your dump for apply mods

00000060 : original value is 92 and need to become B2
00000061 : orginal value is 5A and need to become 5E

Is it what you wrote ?

Don't forget to add me [Image: postbit_reputation.gif] and [Image: tyl_add.png] if I helped you handshake


Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Polo 6R Dashboard swap peppearci 9 208 13-03-2024, 08:22 AM
Last Post: ady2006
MDaewoo LS7T-10849-MC firmware ford fusion dashboard roenkosergey 1 86 03-03-2024, 19:08 PM
Last Post: mechanicBB
  Freightliner dashboard Wiring Diagrams Andrnet 0 73 04-02-2024, 10:26 AM
Last Post: Andrnet
ZSkoda Ford Focus 2018+ RH850 Dashboard atis 1 190 10-01-2024, 16:29 PM
Last Post: Clusters
KOpel Corsa D Needle Sweep AlpinWeiss2k18 2 1,813 22-11-2023, 05:51 AM
Last Post: nikiwrc
JFiat fiat 500 dashboard tft tommy999 1 198 16-11-2023, 14:11 PM
Last Post: volavka
LFord Ford Ka RU8 Dashboard SMD ABL305 0 234 29-09-2023, 20:15 PM
Last Post: ABL305
ZVW 2006 VW Fox Dashboard 9S12 2k78X Burnout 8 2,286 10-08-2023, 12:52 PM
Last Post: racing
PPeugeot Peugeot 307 dashboard pinout dani3lxxl 8 1,043 03-08-2023, 11:13 AM
Last Post: liviu2004
  VW MQB dashboard mcu rs@chip 0 487 21-06-2023, 22:10 PM
Last Post: rs@chip

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content