[wahye]

Hello to all GA members
we know all that problem in keys on old MB with motorola .11 , we can't regenerate a new dump for this type so we can make a new key with this procedure :

1- Read ezs MCU eeprom

2- Use SKC calculator and generate .21 keys

3- Use Hex editor and open a key dump

4- Create a new empty file

5- Adress 1h is key password, write the 8 bytes inverted in new file at adress 3h
ex: 88 47....D2 must write D2....47 88

6- In new file adress 0h write the key status 04 FC 00

7- In .21 dump adress 9h are the SSID write the 4 bytes inverted at adress Bh in new file
ex: C4 76 6C BC must write BC 6C 76 C4

8- In .21 dump copy all bytes from 7h to 7Ch and past in new dump adress Fh

9- At adresses 7Fh, 80h, 81h and 82h write 01

10- Fill all adresses to the end of dump with 00

11- Last 5 bytes is remark and can be what you whant

12- Write new dump in key mcu and enjoy.
with this method we only convert the dump for .21 to .11
so if anybody can't make this for her self i don't any info to add
Best Regards
wahye

[smayer]

I´m the autor of this text, except the part after point 12, next time let people know the autor and don´t apropries the work of others.

Posted 9th October, 2013, 10:50 PM in another forum.

Correction to point 8

8- In .21 dump copy all bytes from Dh to 7Ch and past in new dump adress Fh

Best regards

---

Happy New Year

[tawaf11]

HI FRIEND
i test this solution car star ok remot ok but light in key clignote and off always if put key in ezs. in next car i find this problem in dump and share solution 100/100.
thank you very much four solution.