[bohozoku]

Well at least i have usb music play availabe and radio would work.... im aware of navi functionality that emulator is needed, ordered and waiting, but for now id like to code it to match my car...

if someone is able to assist me through teamviewer now id be very grateful!

[larshutten]

You can send me a Pm with details

[bohozoku]

To all who contributed to help me. Thank you.

VO Coding did not work, but FDL Coding (thank Lars) did the job, and i got HU back to work (ex. Navi which was obvious of course). I need only to recode some settings (USB port, BT, Check Control messages etc.) but i bet i'll find them in future/cheat sheets.

[bohozoku]

Just change the vin in fsc extended-writedatabyindentifiervin with your vin and try again.

This is not the Most handy thing to do.... because even with emulator your navi Will still not work.... and besides you now have vin mismatch in identifier vin and fsc vin

yup thats what i said. he will loose functionality of nav/voice etc.. because fsc are donor.. unless he uses an emulator..but also if he had entrynav before he could use repair pack for his vin.. that way all will be good..

Now, i installed emulator, when i go to navi it asks for enabling code.
what to do /
-> Read the state from "1" ECU(s) <--

HU_ENTRYNAV[DiagAddress=99(0x63)]
WBA8H910X0K870421
RootCertStatus not available
SWSigStatus accepted
SWTApplications
----------
AppID 180(0xB4)
UpgradeIndex 39(0x27)
SWTType SWTshort
FSCStatus rejected
FSCCertStatus not available
----------
AppID 179(0xB3)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 201(0xC9)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus accepted
FSCCertStatus not available
----------
AppID 223(0xDF)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus cancelled
FSCCertStatus not available
----------
AppID 111(0x6F)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus not available
FSCCertStatus not available
----------
AppID 199(0xC7)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus accepted
FSCCertStatus not available
----------
AppID 200(0xC8)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus accepted
FSCCertStatus not available
----------
AppID 156(0x9C)
UpgradeIndex 1(0x01)
SWTType SWTclassic light
FSCStatus not available
FSCCertStatus not available
----------
AppID 178(0xB2)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 181(0xB5)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 182(0xB6)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 183(0xB7)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 184(0xB8)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 185(0xB9)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 186(0xBA)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 187(0xBB)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 188(0xBC)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 204(0xCC)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 206(0xCE)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 219(0xDB)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available
----------
AppID 221(0xDD)
UpgradeIndex 1(0x01)
SWTType SWTshort
FSCStatus not available
FSCCertStatus not available

[ionutmaruta]

Can I change the default language in my HU_ENTRYNAV ?
Where?

In the settings menu I don't have the Romanian language (did not show up in display), but in the codding appear in HU_ENTRYNAV / 3000 HMI, 98 / Langauge 1....16
and in LANGUAGE_MASTER.

See the attached screenshot.