Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ODIS 4.2.3 does not recognize VAS6154
08-11-2017, 18:36 PM,
Post: #11
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 18:29 PM)apoelistas Wrote:  
(08-11-2017, 18:18 PM)georgia55 Wrote:  Can you tell me how can I do that?

Right hand
Configure
Select your vas
(Try both vas5054a and vas6154)

Change
Select
Change
Something like that
do you mean in device Maneger?
Quote this message in a reply
08-11-2017, 18:55 PM, (This post was last modified: 08-11-2017, 18:57 PM by apoelistas.)
Post: #12
RE: ODIS 4.2.3 does not recognize VAS6154
I did say odis. Did you find the selection???

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
09-11-2017, 00:27 AM,
Post: #13
RE: ODIS 4.2.3 does not recognize VAS6154
(08-11-2017, 15:02 PM)georgia55 Wrote:  I have ordered a VAS 6154 SP308,
Can someone help me?

I bet its not VAS6154. Its a vcx nano inside a VAS6154 looking body.
Quote this message in a reply
09-11-2017, 05:46 AM, (This post was last modified: 09-11-2017, 05:50 AM by apoelistas.)
Post: #14
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 00:27 AM)ninja_zx11 Wrote:  
(08-11-2017, 15:02 PM)georgia55 Wrote:  I have ordered a VAS 6154 SP308,
Can someone help me?

I bet its not VAS6154. Its a vcx nano inside a VAS6154 looking body.

Actually it must be a simplified version of vcx nano. Comparing the two vcx nano is more expensive to manufacture. However with vcx nano you need an extender.

It i a passthru device that either is recognised manually as vas5054a or vas6154 in odis configurator.

The problem with these devices because of inability of frmware upgrade downgrade with odis-e (since it is a different device) and maybe due to other hardware limitations it may be not be abe to flash or perform other functions. with odis-s it should work fine. As for geko users it was not checked if it can flash with SVM (odis-s).

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
09-11-2017, 08:05 AM, (This post was last modified: 09-11-2017, 08:23 AM by marour.)
Post: #15
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 05:46 AM)apoelistas Wrote:  Actually it must be a simplified version of vcx nano. Comparing the two vcx nano is more expensive to manufacture. However with vcx nano you need an extender.

It i a passthru device that either is recognised manually as vas5054a or vas6154 in odis configurator.

The problem with these devices because of inability of frmware upgrade downgrade with odis-e (since it is a different device) and maybe due to other hardware limitations it may be not be abe to flash or perform other functions. with odis-s it should work fine. As for geko users it was not checked if it can flash with SVM (odis-s).

Hi apoelistas,
So, do you mean J2534 passthru devices can not be used with ODIS-E for flashing?
Thanks,
Quote this message in a reply
09-11-2017, 11:10 AM, (This post was last modified: 09-11-2017, 11:13 AM by apoelistas.)
Post: #16
RE: ODIS 4.2.3 does not recognize VAS6154
With ODIS-E I have my doubts.

VCX nano tested and failed miserably.

Well unless its own app is high tech.

If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 2 users say Thank You to apoelistas for this post
09-11-2017, 14:04 PM,
Post: #17
RE: ODIS 4.2.3 does not recognize VAS6154
I have installed Odis second time and vas5054 selected, still have no connection. which software is for passthru? I want to try with passthru software.
Quote this message in a reply
09-11-2017, 15:11 PM, (This post was last modified: 09-11-2017, 17:10 PM by apoelistas.)
Post: #18
RE: ODIS 4.2.3 does not recognize VAS6154
(09-11-2017, 14:04 PM)georgia55 Wrote:  I have installed Odis second time and vas5054 selected, still have no connection. which software is for passthru? I want to try with passthru software.

try also passthru selection and vas6154. Not sure which one works (it will detect its id)

(The following I hope you have already done: install vci manager, update firmware of vcx6154 from vci manager, and install odis driver update again from vci manager. Press Test did you get a pass??)

If you dont install vci manager your device will not work. I will try to add the link with installation instructions.
vcx6154.txt
File Type: .txt
Downloaded: 70 times
Size: 91 bytes


If you like my post press [Image: postbit_thx.gif] If my post has resolved your issue press [Image: postbit_reputation.gif]

Quote this message in a reply
[+] 3 users say Thank You to apoelistas for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  ODIS-Service_update_23_0_1-EU_20240410_Postsetup_230001.105.1290_test Tadk 302 18,923 5 hours ago
Last Post: Cla73m
  ODIS engineering passthru install sanil 3 84 Yesterday, 20:20 PM
Last Post: vagvag
00Windows ODIS-Service 6.2.0 Postsetup 4160 (test) Tadk 184 13,268 Yesterday, 04:47 AM
Last Post: tu329
0Scope ODIS-Service 7.2.1 Postsetup 4160 (test) Tadk 1,055 100,144 Yesterday, 00:39 AM
Last Post: c20091929
Lamborghini ODIS Service 23.2.2 + Activations justdiag 62 4,447 15-04-2024, 08:41 AM
Last Post: justdiag
ZBentley ODIS Service 11.0.1 + Activations justdiag 109 9,727 14-04-2024, 19:20 PM
Last Post: justdiag
0Scope ODIS-Engineering 12.2 Postsetup 1060 (test) Tadk 263 34,316 14-04-2024, 07:56 AM
Last Post: RitterDussel
ZVW Odis Engineering 14 + Activations fantomel 346 39,937 13-04-2024, 23:40 PM
Last Post: ch0ngin
ZTAudi ODIS E 18 help making patch jkraemer0485 2 435 11-04-2024, 09:36 AM
Last Post: justdiag
ZVW ODIS + Tactrix Openport clone Prazcon 2 211 09-04-2024, 15:50 PM
Last Post: pupu144

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content