Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. CarLabImmo

  2. AUTO-CHIPS

  3. Ecu-Service



Fiat Multiecuscan v3.8 Full Registered
23-10-2017, 18:51 PM, (This post was last modified: 10-02-2019, 15:04 PM by obdstart.)
Post: #1
JFiat  Fiat Multiecuscan v3.8 Full Registered
Fiat Multiecuscan v3.8 Full Registered Free for All
Inside is Install instruction..
Password: obdstart3_8fmes

EDIT: Added new link!


Attached Files Thumbnail(s)
   
Fiat Multiecuscan 3.8 Full Registered.zip
File Type: .zip
Downloaded: 331 times
Size: 340 bytes


Quality tool as the beautiful woman...
Reputation: +42 - Dash_Burner [+1] , galaxia [+1] , jepeti [+1] , okolo [+1] , Twoone [+1] , massi4791 [+1] , lukas [+1] , sisco [+1] , ToMiBoY [+1] , cicko [+1] , mikajna [+1] , titoun [+1] , 2pac4u [+1] , Joe2 [+1] , tenaglia [+1] , antal [+1] , alek-pere [+1] , McMihai [+1] , WinMX354 [+1] , djslowrnb [+1] , bobdinro [+1] , JarsaR [+1] , hbalazs [+1] , Teruo [+1] , ft2014 [+1] , rkaynak [+1] , mertyigit [+1] , DoZe [+1] , blokers77 [+1] , kumbari [+1] , bogo75 [+1] , stasi [+1] , dudaps [+1] , mdanilo [+1] , paino [+1] , reasson23 [+1] , reparoyo [+1] , kikis [+1] , wald [+1] , rayhane13 [+1] , Blaxky [+1] , florinolo [+1]
Quote this message in a reply
[+] 121 users say Thank You to obdstart for this post
23-10-2017, 20:21 PM,
Post: #2
RE: Fiat Multiecuscan v3.8 Full Registered Free
Ok ok just write what year the car handles and where to buy cable, interface and what interface ?

[color=#000080]ALL CHIP TUNING DPF FAP NOX EGR ADBLUE SONDA FLAPS/SWIRL THROTTLE VALVE/TVA MAF REMOVAL STARTSTOP DISABLE DTC OFF AIR BAG CLEARED ALL CAR KEY PROGRAMING, ECU EDC17 CHANGE KILOMETERS
HOW I HELP YOU GOOD DO NOT FORGET TO USE THANKS AND REP BUTTON
www.quickservice.com.pl .... chiptuning.dpf.egr@gmail.com

Visit this user's website
Quote this message in a reply
23-10-2017, 20:28 PM, (This post was last modified: 23-10-2017, 20:41 PM by 23Andi23.)
Post: #3
RE: Fiat Multiecuscan v3.8 Full Registered Free
(23-10-2017, 20:21 PM)QUICK SERVICE Wrote:  Ok ok just write what year the car handles and where to buy cable, interface and what interface ?
Work with elm interface biggrin

   

   

KTAG 7.026 EU - KESS 5.017/2.47 EU - MPPS V18 EU - FGTECH EU
XCAN CLONE - CARPROG REWORKED - VCDS/OPCOM HQ - KESS/KTAG REWORKED
BDM ADAPTERS - BDM/BOOTFRAME HQ - BOOTPINS AND MANY MORE

>>"CONNECTION WIZARD" OBD BREAKOUT BOX WITH INTEGRATED COIL<<
ASK ME IN PM FOR INFOS AND SPECIAL PRICES
Quote this message in a reply
[+] 5 users say Thank You to 23Andi23 for this post
23-10-2017, 20:37 PM,
Post: #4
RE: Fiat Multiecuscan v3.8 Full Registered Free
Work with elm interface and vag kkl.
Quote this message in a reply
[+] 3 users say Thank You to darek_naprawa for this post
23-10-2017, 23:29 PM, (This post was last modified: 24-10-2017, 18:29 PM by rs@chip.)
Post: #5
RE: Fiat Multiecuscan v3.8 Full Registered Free
(23-10-2017, 20:28 PM)23Andi23 Wrote:  
(23-10-2017, 20:21 PM)QUICK SERVICE Wrote:  Ok ok just write what year the car handles and where to buy cable, interface and what interface ?
Work with elm interface biggrin

andy did you try conect to can-bus based modules with elm..previus version 3.7 with patch didnt work on can only k-line(interface passed all OK) while 3.1 works perfect on both k+can with my ori elm..thanks
Quote this message in a reply
[+] 2 users say Thank You to rs@chip for this post
24-10-2017, 00:39 AM,
Post: #6
RE: Fiat Multiecuscan v3.8 Full Registered Free
(23-10-2017, 23:29 PM)alex.eobd2 Wrote:  
(23-10-2017, 20:28 PM)23Andi23 Wrote:  
(23-10-2017, 20:21 PM)QUICK SERVICE Wrote:  Ok ok just write what year the car handles and where to buy cable, interface and what interface ?
Work with elm interface biggrin

andy did you try conect to can-bus based modules with elm..previus version 3.7 with patch didnt work on can only k-line(interface passed all OK) while 3.1 works perfect on both k+can with my oem elm..thanks

I am not sure what ecu´s we tried to connect when we used it but i will try it again this days if my friend with fiat have some minutes for me. i have 3.6 installed at the moment but will install 3.8 on other laptop too to test it

KTAG 7.026 EU - KESS 5.017/2.47 EU - MPPS V18 EU - FGTECH EU
XCAN CLONE - CARPROG REWORKED - VCDS/OPCOM HQ - KESS/KTAG REWORKED
BDM ADAPTERS - BDM/BOOTFRAME HQ - BOOTPINS AND MANY MORE

>>"CONNECTION WIZARD" OBD BREAKOUT BOX WITH INTEGRATED COIL<<
ASK ME IN PM FOR INFOS AND SPECIAL PRICES
Quote this message in a reply
[+] 1 user says Thank You to 23Andi23 for this post
24-10-2017, 04:07 AM,
Post: #7
RE: Fiat Multiecuscan v3.8 Full Registered Free
So how does elm work properly? are all ok?

[color=#000080]ALL CHIP TUNING DPF FAP NOX EGR ADBLUE SONDA FLAPS/SWIRL THROTTLE VALVE/TVA MAF REMOVAL STARTSTOP DISABLE DTC OFF AIR BAG CLEARED ALL CAR KEY PROGRAMING, ECU EDC17 CHANGE KILOMETERS
HOW I HELP YOU GOOD DO NOT FORGET TO USE THANKS AND REP BUTTON
www.quickservice.com.pl .... chiptuning.dpf.egr@gmail.com

Visit this user's website
Quote this message in a reply
24-10-2017, 18:28 PM,
Post: #8
RE: Fiat Multiecuscan v3.8 Full Registered Free
(24-10-2017, 04:07 AM)QUICK SERVICE Wrote:  So how does elm work properly? are all ok?

yes all ok..veri useful for remote programing on bcm and proxy align on newer fiats
Quote this message in a reply
03-11-2017, 15:11 PM,
Post: #9
RE: Fiat Multiecuscan v3.8 Full Registered Free
Hi all
i tested this version 3.8 full patched and can bus not working same version 3.7,install back version 3.6 all working ok,have somebody this same error?cam help me about this problem?big thnx

BR asto

underX-Tool Superprog and Upd.2019 for sale!!PCR2.1 PIN,KM,CS,MAC1,MAC2,ImmoOFF,Iaw59F Dec.Tool,BMW,MB,Renault CAN filter,Immo Off-CRC calc.,BMW Fxx-Exx Original Keys Unlock,Nissan LCN Nav Dec. OMAP mcu,RCD310-510 decode or code off.Calculate JCB v1-v2,VW Comfort CS,PIN,MAC from dump,EGR-DPF-Lambda OFF
Quote this message in a reply
03-11-2017, 21:33 PM,
Post: #10
RE: Fiat Multiecuscan v3.8 Full Registered Free
(03-11-2017, 15:11 PM)asto Wrote:  Hi all
i tested this version 3.8 full patched and can bus not working same version 3.7,install back version 3.6 all working ok,have somebody this same error?cam help me about this problem?big thnx

BR asto

yes mate can-bus not working...I switch back too..not sure where is the problem in softwere or patch
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
JFiat Fiat Multiecuscan 3.9R1 + FIX blokers77 10 13,941 22-05-2019, 20:34 PM
Last Post: donesko
JFiat COC Documents FIAT anonimo 0 138 07-05-2019, 06:55 AM
Last Post: anonimo
  fiat punto evo megane73 0 137 30-04-2019, 20:26 PM
Last Post: megane73
JFiat Multiecuscan 4.0 Full REGISTERED karabulut588 41 41,888 22-04-2019, 17:58 PM
Last Post: VAG
JFiat FCOM and Fiat 124 Spider durchblicker 1 350 25-03-2019, 20:55 PM
Last Post: victorysatgr
  MultiECUSca V 3.7 Full with Patch odis 14 10,037 11-02-2019, 19:17 PM
Last Post: ewotecg4
  Fiat witech plus software kmaverick 4 2,947 22-01-2019, 10:46 AM
Last Post: smart0187
  Fiat MultiEcuScan 4.2 Twoone 16 8,693 19-01-2019, 10:11 AM
Last Post: ToMiBoY
  How to install elm 327 drivers to make it work with multiecuscan laguna 21 9,077 08-01-2019, 15:05 PM
Last Post: adamistr0
JFiat Fiat albea 2004 OBD2 alusta 0 251 21-12-2018, 13:24 PM
Last Post: alusta

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content