Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Kess Ktag

  2. MOD FILES

  3. Enigma Tool

  4. ECU CHIPS

  5. NBE Files

  6. Smartauto CarPlay



Post Reply 
Mazda 6 2008 BCM problem
23-10-2017, 20:39 PM
Post: #1
LMazda Mazda 6 2008 BCM problem
I have a Mazda 6 2008 that has a problem with BCM.
I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors.
It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows...

BCM = VP7ALF-14B205-GJ

Cannot find a replacement (used) with GJ!
What will fit and function with the car?
Find all posts by this user
Quote this message in a reply
01-12-2017, 22:18 PM
Post: #2
RE: Mazda 6 2008 BCM problem
Nobody knows?

(23-10-2017 20:39 PM)Mex165 Wrote:  I have a Mazda 6 2008 that has a problem with BCM.
I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors.
It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows...

BCM = VP7ALF-14B205-GJ

Cannot find a replacement (used) with GJ!
What will fit and function with the car?
Find all posts by this user
Quote this message in a reply
07-12-2017, 21:42 PM (This post was last modified: 07-12-2017 21:43 PM by xtac1080.)
Post: #3
RE: Mazda 6 2008 BCM problem
(23-10-2017 20:39 PM)Mex165 Wrote:  I have a Mazda 6 2008 that has a problem with BCM.
I took it apart and soldered a broken bridge (burnt) and now Everything works exept locking the doors.
It unlocks the doors without problem, but if I press buttons on remote to many times the 30A fuse blows...

BCM = VP7ALF-14B205-GJ

Cannot find a replacement (used) with GJ!
What will fit and function with the car?

There are lots of 30A fuses in this car. Which one is blowing? What caused the initial BCM short?
Find all posts by this user
Quote this message in a reply
08-12-2017, 07:24 AM
Post: #4
RE: Mazda 6 2008 BCM problem
There is only one for locks and trunk.
That fuse is on the top middle (a while ago) by the bcm.
Micro fuse...
Find all posts by this user
Quote this message in a reply
22-12-2017, 19:58 PM
Post: #5
RE: Mazda 6 2008 BCM problem
(08-12-2017 07:24 AM)Mex165 Wrote:  There is only one for locks and trunk.
That fuse is on the top middle (a while ago) by the bcm.
Micro fuse...

If you trace pcb inputs/outputs according to wiring diagram to the faulty double relay you might be able to solve it ..
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need mazda wd in vladani 0 192 02-03-2018 16:44 PM
Last Post: vladani
LMazda Mazda 2 eeprom + flash sid804 help plz in ACSGE 0 210 23-02-2018 10:10 AM
Last Post: ACSGE
LMazda Help Mazda CX7 in Lhcenbolt 2 308 18-02-2018 11:33 AM
Last Post: Lhcenbolt
LFord Ids 108.01 problem with key programming in Moto_Mike 1 388 13-02-2018 21:35 PM
Last Post: rs@chip
  Ford IDS problem (No Transit 2.2 DTCi 2006) in roanoke 5 745 09-02-2018 16:23 PM
Last Post: jezus
LMazda VXDiag VCX Nano not detected in Mazda IDS. Need help! in Torrentwin 2 1,215 09-02-2018 05:04 AM
Last Post: JonhUSA
  Ford etis 2015 online problem in ykntr 9 1,294 03-02-2018 19:51 PM
Last Post: ykntr
  Ford Etis 05-2008 ActivatHion in ykntr 0 403 27-01-2018 21:40 PM
Last Post: ykntr
  Focus c-max 2003 gem modul problem in escape82 4 468 09-01-2018 06:22 AM
Last Post: xtac1080
LMazda Mazda IDS 108 in alexbez 3 1,707 06-01-2018 17:04 PM
Last Post: alexbez

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content