Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F30 - Possible to delete bulb short circuit counter?
24-10-2017, 15:04 PM,
Post: #1
|
|||
|
|||
F30 - Possible to delete bulb short circuit counter?
Is it possible, using Tool32, name seems a bit different from previous FRM etc modules before?
I tried, system replies "too many attempts" and does not reset the counter. Any possible fix without having to change FEM? Thanks |
|||
25-10-2017, 22:15 PM,
Post: #2
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
Have you tried procedure in ista/d? With switching on and off ignition then affected lamp.
I've done one in rem successfully. |
|||
26-10-2017, 08:26 AM,
Post: #3
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
|
|||
26-10-2017, 10:14 AM,
Post: #4
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
(26-10-2017, 08:26 AM)bmwcoder75 Wrote:use Tool32 load FEM_xx.prg find"status_kurzschlusscounter_abs" Check Lamps status.(25-10-2017, 22:15 PM)Tombo Wrote: Have you tried procedure in ista/d? With switching on and off ignition then affected lamp. Normal value is 25000 or 50000. click "steuern_reset_kurzschlusscounter" in "arguments" input defective lamp address 0xXX;25000>execute job |
|||
26-10-2017, 11:23 AM,
Post: #5
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
You can use Rheingold
NBTEVO, ENAV2, MGU - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change NCD Secure Coding 2.0 |
|||
08-06-2018, 11:41 AM,
Post: #6
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
(26-10-2017, 10:14 AM)BMW888 Wrote:(26-10-2017, 08:26 AM)bmwcoder75 Wrote:use Tool32 load FEM_xx.prg find"status_kurzschlusscounter_abs" Check Lamps status.(25-10-2017, 22:15 PM)Tombo Wrote: Have you tried procedure in ista/d? With switching on and off ignition then affected lamp. Sorry to dig this, but i'm unable to reset short circuit with this procedure. I get "error_ecu_exceed_number_of_attempts". Any other way? Thoughts? Thanks and best regards. |
|||
08-06-2018, 15:18 PM,
Post: #7
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
(08-06-2018, 11:41 AM)claw Wrote:(26-10-2017, 10:14 AM)BMW888 Wrote:(26-10-2017, 08:26 AM)bmwcoder75 Wrote:use Tool32 load FEM_xx.prg find"status_kurzschlusscounter_abs" Check Lamps status.(25-10-2017, 22:15 PM)Tombo Wrote: Have you tried procedure in ista/d? With switching on and off ignition then affected lamp. In my case nothing worked, ended up getting a brand new FEM, all good now. |
|||
08-06-2018, 15:20 PM,
Post: #8
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
(08-06-2018, 15:18 PM)bmwcoder75 Wrote:(08-06-2018, 11:41 AM)claw Wrote:(26-10-2017, 10:14 AM)BMW888 Wrote:(26-10-2017, 08:26 AM)bmwcoder75 Wrote:use Tool32 load FEM_xx.prg find"status_kurzschlusscounter_abs" Check Lamps status.(25-10-2017, 22:15 PM)Tombo Wrote: Have you tried procedure in ista/d? With switching on and off ignition then affected lamp. It seems that is the only option too... |
|||
08-06-2018, 23:07 PM,
Post: #9
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
(08-06-2018, 15:20 PM)claw Wrote:(08-06-2018, 15:18 PM)bmwcoder75 Wrote:(08-06-2018, 11:41 AM)claw Wrote:(26-10-2017, 10:14 AM)BMW888 Wrote:(26-10-2017, 08:26 AM)bmwcoder75 Wrote: Was not aware of this one I will try thanksuse Tool32 load FEM_xx.prg find"status_kurzschlusscounter_abs" Check Lamps status. repair , recovery eeprom only. |
|||
19-01-2019, 20:22 PM,
Post: #10
|
|||
|
|||
RE: F30 - Possible to delete bulb short circuit counter?
It’s possible recover eeprom on FEM?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content