Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
(Solved) ISTA+ 4.07 through K+DCAN cable on F series
|
30-10-2017, 06:04 AM,
(This post was last modified: 30-10-2017, 06:05 AM by willisodhiambo.)
Post: #1
|
|||
|
|||
|
(Solved) ISTA+ 4.07 through K+DCAN cable on F series
I have just discovered something rather interesting!
The Patched Ediabas that comes with ISTA+ 4.07 in this forum will not connect to F series with K+DCAN cable. In fact, it seems not to connect at all with that cable to any car on my installation!! It so happens I installed BMW tools on one laptop and luckily the Ediabas in that was that from this package. I noticed this version is larger that that that comes with Ista 4.07 To my surprise this one (the Ediabas from Easy Tools) connects to all cars via K+DCAN!! If anyone is having similar problems I can share the Ediabas version that works for me. On the flip side I now need to test it with ENET to see how it behaves. You win some you loose some 
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
30-10-2017, 06:19 AM,
Post: #2
|
|||
|
|||
|
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
For those that know how Inpa works it's nothing new, it's the ediabas.ini file (C:\EDIABAS\Bin) that controls the connection type (ICOM, ENET or Usb cable) so instead of installing an entire package you can only replace or edit the ediabas.ini as needed.
good luck! |
|||
|
|
|
30-10-2017, 07:11 AM,
Post: #3
|
|||
|
|||
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
(30-10-2017, 06:04 AM)willisodhiambo Wrote: I have just discovered something rather interesting! Can you share ediabas.ini file. |
|||
|
|
|
30-10-2017, 10:20 AM,
Post: #4
|
|||
|
|||
|
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
Ediabas.ini 7.3.0
K-dcan Interface = STD:OBD [TCP] RemoteHost =LMUC203404 Port = 6801 OBD.ini [OBD] Port=Com9 Hardware=OBD Ediabas.imi "ENET" Interface = ENET [TCP] RemoteHost =LMUC203404 Port = 6801 [XEthernet] ;============================================================================= RemoteHost = Autodetect HeaderFormat = 0 TesterAddress = F4,F5 ControlPort = 6811 DiagnosticPort = 6801 TimeoutConnect = 20000 If my post helped you hit the thanks and reputation button!
 |
|||
| Reputation: +2 - dj_jormi [+1] , gpdriver [+1] | |||
|
|
|
30-10-2017, 12:38 PM,
(This post was last modified: 30-10-2017, 12:41 PM by willisodhiambo.)
Post: #5
|
|||
|
|||
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
(30-10-2017, 06:19 AM)egyclick Wrote: For those that know how Inpa works it's nothing new, it's the ediabas.ini file (C:\EDIABAS\Bin) that controls the connection type (ICOM, ENET or Usb cable) so instead of installing an entire package you can only replace or edit the ediabas.ini as needed. and this is what I found mysterious!! Before replacing the Ediabas in the non working laptop I compared the Ediabas configuration files from both installations, one from tools and one from ISTA. They were 100% the same! Strange and I cant really fathom what was causing this problem. (30-10-2017, 10:20 AM)DNK76 Wrote: Ediabas.ini 7.3.0 Do you understand this remote host - LMUC203404? What does it refer to? |
|||
|
|
|
30-10-2017, 12:49 PM,
Post: #6
|
|||
|
|||
|
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
Check obd.ini in Ediabas folder: Port=Com9 in patched Ediabas.
|
|||
|
|
|
30-10-2017, 13:43 PM,
Post: #7
|
|||
|
|||
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
I never looked into this via port setting , may play with it , I been working on a batch file menu to delete copy rename etc , thru due to ista not being a native install unable to auto start w/o dbl clicking shortcut will try in work out bugs this week then post here for those who use ista/ista+ /via inpa kcan
|
|||
|
|
|
30-10-2017, 20:11 PM,
(This post was last modified: 30-10-2017, 20:14 PM by DNK76.)
Post: #8
|
|||
|
|||
|
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
I have so
[TCP] RemoteHost = 169.254.92.38 because i have icom and to easily change interfaces using easyconnect But there is no need to change K-dcan and ENET RemoteHost = LMUC203404 how do you have icom emulator for K-dcan for ISTAP it's set RemoteHost =192.168.68.40 for STD: OBD (K-DCAN) important only interface = STD: OBD port = 6801 and OBD.ini settings and that's it If my post helped you hit the thanks and reputation button!
|
|||
|
|
|
31-10-2017, 12:03 PM,
Post: #9
|
|||
|
|||
RE: (Solved) ISTA+ 4.07 through K+DCAN cable on F series
(30-10-2017, 20:11 PM)DNK76 Wrote: I have so Interesting! I had changed mine to my ICOM IP as well and it seemed to work ok. Changed it back to this LMUC203404 and it still works, yet to use my ICOM but will test. I think I now know what setting Ediabas and OBD.ini need to have to use any of the interfaces. Intriguing considering three months ago it was like Greek to me |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
