Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Siemens SID801A, read, write ECU
31-10-2017, 19:36 PM, (This post was last modified: 31-10-2017, 21:33 PM by grmsek.damjan.)
Post: #1
PCitroen  Siemens SID801A, read, write ECU
Hello
Can anybody suggests me how to read, write this ecu?
Citroen berlingo 2.0hdi, siemens SID801A
Tools available;
Kess 2.08 EU...(not support obd)
Ktag rework 6.070 ...(not on the list,just 801 boot mode)
MPPS V16 EU...(not on the list)
Galletto china..-obd protocol;k-line(read write 512kb,flash 29f400bb boot mode pin 28 to mass)
-boot mode protocol list(not on the list, just 801,802,805,806)

I dont understand with galletto obd protocol and boot mode pin 28 to mass in help field bellow???
I know it would be the best with desolder flash and with programmer, but I dont have itthink
Thankyouhi

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
01-11-2017, 00:16 AM,
Post: #2
RE: Siemens SID801A, read, write ECU
Nice collection of tools,
but, I have suggest you to R/W 29F400 on programmer..directly in socket, handly. Best and safer way, bellieve me!!!

rgds,
cuby
Quote this message in a reply
[+] 3 users say Thank You to cubica for this post
01-11-2017, 01:48 AM,
Post: #3
RE: Siemens SID801A, read, write ECU
Mppsv18 clon test ok
Quote this message in a reply
[+] 2 users say Thank You to ayllon308 for this post
01-11-2017, 08:37 AM,
Post: #4
RE: Siemens SID801A, read, write ECU
You can use katg

see photo

801A.rar
File Type: .rar
Downloaded: 203 times
Size: 1.27 MB

Quote this message in a reply
[+] 3 users say Thank You to QUIKCAR for this post
01-11-2017, 10:16 AM, (This post was last modified: 01-11-2017, 17:17 PM by grmsek.damjan.)
Post: #5
RE: Siemens SID801A, read, write ECU
@uikcar, you gave me fhoto for 803A it have bdm pads, my ecu is 801A without bdm pads Its not the same!!!
Today opened ecu and the hw is the same as on SID802,804,805,806 Galletto user manuals..so I used it with boot mode and pin28 on mass..
(when the warning message appear put ignition off, put boot pin on mass( I put it on black gnd wire),turn ignt. on-switch, pud down boot pin from mass)..OK..finally started readingbiggrin
Can anybody check if it is good reading? 512kb (I am a little woried about china galletto) when writing backthink
Is file ori?
Thankyou


Attached Files Thumbnail(s)
   
Berlingo_SID801A_2.0HDI_BOOT_Ori.zip
File Type: .zip
Downloaded: 81 times
Size: 140.9 KB


Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
02-11-2017, 13:34 PM, (This post was last modified: 02-11-2017, 13:34 PM by 8baller.)
Post: #6
RE: Siemens SID801A, read, write ECU
File is ok / original
Quote this message in a reply
[+] 2 users say Thank You to 8baller for this post
02-11-2017, 15:18 PM,
Post: #7
RE: Siemens SID801A, read, write ECU
KESS 4.036 (KSUITE) 2.13 support OBD


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 2 users say Thank You to Strellson for this post
04-11-2017, 17:08 PM,
Post: #8
RE: Siemens SID801A, read, write ECU
No, my friend you gave me kess list for sid801, its not the same ecu hw as sid801A..and you can not read this ecu by obd (RD is unchecked), maybe with ori kessthinking
Anyway, I found the solution in the post described above (picture of my reading and read file in attachment)biggrin

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
09-02-2018, 21:15 PM,
Post: #9
0Scope  RE: Siemens SID801A, read, write ECU
Hello hihihihihi

i used the search function to find help about reading sid 801a and there is no answer to my question. i don t wanted to create a new thread for this because this one is not too old happyhappy
i heard that it is needed to use a 1Kohm boot pin resistor and remove this boot pin wire before perfom reading this is for galletto reading. if not the dump file will be corrupted
is it needed to use this resistor with ktag? ktag help file does not talk about resistor and remove pin boot wire? if it is right ktaf help files will show informations about these one?speechless
what about reading of sid801?
please confirm thinkingthinking
thank you very much
Quote this message in a reply
09-02-2018, 21:35 PM, (This post was last modified: 09-02-2018, 21:37 PM by grmsek.damjan.)
Post: #10
RE: Siemens SID801A, read, write ECU
Hello
Ktag not support sid801A (At least my old Ktag 6.070)
Galleto boot mode instructions uses boot wire without resistor just pin 28 to mass..
Do it as I am in the picture aboveyes
Sid801 can Ktag do, just google on youtubeyes

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi ME7.1.1 8E0910560J full read needed Andreis 0 44 18-03-2024, 19:40 PM
Last Post: Andreis
  EDC15VM 4B2 907 401 Write problem sivyx 8 233 13-03-2024, 07:31 AM
Last Post: dimitar
ZVW 1.8T AUM Bora Stage 1 read out and flash? Speedy_07 3 95 11-03-2024, 09:52 AM
Last Post: Elijah
  ECU read write lock gvitkis 2 580 05-03-2024, 20:24 PM
Last Post: robertop
  Audi A6 3.2 FSI flaps off siemens vdo 4f1910559d bodzio012 0 42 05-03-2024, 10:03 AM
Last Post: bodzio012
JFiat FIAT EDC16C39 read/write isamyku 1 96 29-02-2024, 15:43 PM
Last Post: bogdanwmw
  Need full read Johnson Controls S3000 Renault Megane 2.0 RS 8200509965 Maikiu 2 92 28-02-2024, 21:14 PM
Last Post: martink550
  Skoda Siemens PPD 1.2 injector swap p W r 0 54 28-02-2024, 14:32 PM
Last Post: p W r
  BMW e60 Siemens 5wk93642 MSD80 eXslide89 4 147 28-02-2024, 13:06 PM
Last Post: dimitar
UInfiniti Nissan X-Trail 2.2 136hp 2006 How to read/write this ECU beg1 3 135 28-02-2024, 13:03 PM
Last Post: dimitar

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content