Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Siemens SID801A, read, write ECU
10-02-2018, 06:57 AM,
Post: #11
RE: Siemens SID801A, read, write ECU
Hello Greek.damjan thank you for your answer.
Mine ktag is a 7.020 and know supports sid801A.
Well I will do this.
And the boot pin wire you removed it from the ground before start dump? Somebody tell me that he got a corrupt dump file if wire not removed before reading.
He checked the dump file with an ori with the help of a hexdecimal editor.
What do you think about this?
What hp was your engine ? Maybe I could compare with ori file below but mine is a 406 2.0 hdi 110
Thank you smile
Quote this message in a reply
10-02-2018, 07:21 AM, (This post was last modified: 10-02-2018, 07:29 AM by grmsek.damjan.)
Post: #12
RE: Siemens SID801A, read, write ECU
Your Ktag 7.020 support sid 801A?thinking
YES,removed..when the warning message appear put ignition off(switch), put boot pin on mass( I put it on black gnd wire),turn ignt. on(switch),after half a second to one second pud down boot pin from mass)..press OK..finally started reading..the same for writingyes
Mine was 90hpbiggrin

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
10-02-2018, 12:17 PM,
Post: #13
RE: Siemens SID801A, read, write ECU
I don't want to make any mistakes but i think that it supported in ktag to read write via bootmod and verify checksum please watch pictures and say what you think
sorry it is in french smile


Attached Files
sid801 sid801a.rar
File Type: .rar
Downloaded: 64 times
Size: 4.43 MB

Quote this message in a reply
10-02-2018, 19:36 PM,
Post: #14
RE: Siemens SID801A, read, write ECU
Interesting, my old Ktag does not have it, I checked with your car select and also checked with protocolsthinkingNowhere SID801athinking

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
11-02-2018, 08:03 AM, (This post was last modified: 13-02-2018, 03:28 AM by krisrider24.)
Post: #15
RE: Siemens SID801A, read, write ECU
Yes i Will let you know if on my 406's friend it is a sid 801A and if it works.
Because I am learning, I saw that the ecu can be too a Bosch and I did not see the car yet. So I don't know which on is set on.
But before to make anything on a car,I phish more informations I can about the differents possibilitysmile it is so interesting.

Maybe my update is really interesting and add a lot of cars' ecu
Quote this message in a reply
09-04-2018, 01:55 AM,
Post: #16
RE: Siemens SID801A, read, write ECU
width Ktag is very simple to read / write that ecu

ART TECH GARAGE
Quote this message in a reply
11-11-2018, 15:00 PM,
Post: #17
RE: Siemens SID801A, read, write ECU
that ecu read in bootwith ktag,fgtech, write in obd with kess
Quote this message in a reply
12-11-2018, 08:32 AM,
Post: #18
RE: Siemens SID801A, read, write ECU
Is it possible to use BDM100 Siemens adapter with Ktag? This adapter works with converter on FG Tech V24 as far as I know. I don(t want to buy original JR-Tag adaptor for a single use.
Quote this message in a reply
28-12-2018, 21:54 PM,
Post: #19
RE: Siemens SID801A, read, write ECU
Hi, you can buy IOTERMINAL siemens its the best dont need open ecu, read all by obd2
Regards
Quote this message in a reply
09-02-2019, 11:12 AM,
Post: #20
RE: Siemens SID801A, read, write ECU
Hello, I have the same SID801A calculator on a XSARA 2.0 HDI 90 and I am looking to read the mapping by ODB.
I saw that Ayllon308 says he reads with an MPPSV18, read and write by ODB?

I am sorry for my approximate English (I am French)

Thank you in advance
Jonathanv8
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi ME7.1.1 8E0910560J full read needed Andreis 0 45 18-03-2024, 19:40 PM
Last Post: Andreis
  EDC15VM 4B2 907 401 Write problem sivyx 8 238 13-03-2024, 07:31 AM
Last Post: dimitar
ZVW 1.8T AUM Bora Stage 1 read out and flash? Speedy_07 3 99 11-03-2024, 09:52 AM
Last Post: Elijah
  ECU read write lock gvitkis 2 581 05-03-2024, 20:24 PM
Last Post: robertop
  Audi A6 3.2 FSI flaps off siemens vdo 4f1910559d bodzio012 0 43 05-03-2024, 10:03 AM
Last Post: bodzio012
JFiat FIAT EDC16C39 read/write isamyku 1 99 29-02-2024, 15:43 PM
Last Post: bogdanwmw
  Need full read Johnson Controls S3000 Renault Megane 2.0 RS 8200509965 Maikiu 2 93 28-02-2024, 21:14 PM
Last Post: martink550
  Skoda Siemens PPD 1.2 injector swap p W r 0 54 28-02-2024, 14:32 PM
Last Post: p W r
  BMW e60 Siemens 5wk93642 MSD80 eXslide89 4 151 28-02-2024, 13:06 PM
Last Post: dimitar
UInfiniti Nissan X-Trail 2.2 136hp 2006 How to read/write this ECU beg1 3 140 28-02-2024, 13:03 PM
Last Post: dimitar

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content