Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Coding E9x speedometer in E8x
01-03-2018, 13:50 PM,
Post: #1
|
|||
|
|||
Coding E9x speedometer in E8x
Hi I want to code a 335d speedometer in a 123d
What i need to note? Speedometer will be virginized before coding. Thanks BB-Driver |
|||
02-03-2018, 02:21 AM,
Post: #2
|
|||
|
|||
RE: Coding E9x speedometer in E8x
|
|||
02-03-2018, 08:04 AM,
Post: #3
|
|||
|
|||
RE: Coding E9x speedometer in E8x
(02-03-2018, 02:21 AM)emhtuning Wrote:(01-03-2018, 13:50 PM)BB-Driver Wrote: Hi I want to code a 335d speedometer in a 123d No i don't have it yet, you only need to drill a litle on the frame. Connectors are plug and play. |
|||
02-03-2018, 09:47 AM,
Post: #4
|
|||
|
|||
RE: Coding E9x speedometer in E8x
Well , I know many people tried it with no luck but you might have different approach.
virgining the cluster is simple but you need R270 or Xprog tool ( hardware + software ) to be able to read the dump data of the used cluster then change the stored information . coding part the easiest in your project , all E8x uses the same coding data so you have 90% chance to simply plug it in - set VIN in tool32 and then expert coding with NCS. if for some reason NCS refuses to code it then a simple SSD file can load E90 FA and then you can code E90 cluster . |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content