Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II



Post Reply 
Making double sided flat keys with Defu 386A verticle key machine
14-11-2017, 15:23 PM (This post was last modified: 14-11-2017 16:46 PM by ROD-BENDERS.)
Post: #1
Making double sided flat keys with Defu 386A verticle key machine
Hi CT friends, this is a very cheap machine, but does cut most keys well with clamp addons for tibbe etc.

DOES NOT DO "all keys lost"


Ok for doing double sided flat keys buy a universal key clamp and cut it up as in picture 1. (universal clamp wont do these keys)

drill 2.5 mm holes for clamp screws and use 3mm tap to run threads picture 2.

cut some shims from the supplied steel shims picture 3.

Pictures 4 and 5 perfect working key

brilliant machine for the money thumbsup


Attached File(s) Thumbnail(s)
                   

Tight lines and bending rods are what makes my day biggrin
Reputation: +5 - raffy haddad [+1] , CHIKODIAG [+1] , perso69 [+1] , evaldazj [+1] , giiintas [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: raffy haddad , koziol , dell66 , CHIKODIAG , perso69 , 23Andi23 , ucokseparoh , auto fix , evaldazj , sqlkarol , gexplorer , nikolanik , bellota , Chipshop , giiintas , carpi , cjawahir , eliaselias , mbengkel , rightpcb , Mjeppesen24 , strikeforce , faraday
14-03-2018, 08:32 AM
Post: #2
RE: Making double sided flat keys with Defu 386A verticle key machine
(14-11-2017 15:23 PM)ROD-BENDERS Wrote:  Hi CT friends, this is a very cheap machine, but does cut most keys well with clamp addons for tibbe etc.

DOES NOT DO "all keys lost"


Ok for doing double sided flat keys buy a universal key clamp and cut it up as in picture 1. (universal clamp wont do these keys)

drill 2.5 mm holes for clamp screws and use 3mm tap to run threads picture 2.

cut some shims from the supplied steel shims picture 3.

Pictures 4 and 5 perfect working key

brilliant machine for the money thumbsup

Well can u upload link were to get univerasl clamp thanks
Find all posts by this user
Quote this message in a reply
14-03-2018, 08:56 AM
Post: #3
RE: Making double sided flat keys with Defu 386A verticle key machine
Aliexpress or ebay "universal key clamp" should get you started cheers

Tight lines and bending rods are what makes my day biggrin
Find all posts by this user
Quote this message in a reply
14-03-2018, 13:29 PM
Post: #4
RE: Making double sided flat keys with Defu 386A verticle key machine
(14-03-2018 08:56 AM)ROD-BENDERS Wrote:  Aliexpress or ebay "universal key clamp" should get you started cheers

No problem go it one will upload pictures soon
Find all posts by this user
Quote this message in a reply
14-03-2018, 21:14 PM (This post was last modified: 14-03-2018 21:15 PM by giiintas.)
Post: #5
RE: Making double sided flat keys with Defu 386A verticle key machine
(14-03-2018 13:29 PM)giiintas Wrote:  
(14-03-2018 08:56 AM)ROD-BENDERS Wrote:  Aliexpress or ebay "universal key clamp" should get you started cheers

No problem go it one will upload pictures soon

First test hear all good work perfectly, waiting for new clamp will uploaded mor pictures


Attached File(s) Thumbnail(s)
       
Reputation: +1 - ROD-BENDERS [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS , raffy haddad
22-06-2018, 19:07 PM
Post: #6
RE: Making double sided flat keys with Defu 386A verticle key machine
(14-11-2017 15:23 PM)ROD-BENDERS Wrote:  Hi CT friends, this is a very cheap machine, but does cut most keys well with clamp addons for tibbe etc.

DOES NOT DO "all keys lost"


Ok for doing double sided flat keys buy a universal key clamp and cut it up as in picture 1. (universal clamp wont do these keys)

drill 2.5 mm holes for clamp screws and use 3mm tap to run threads picture 2.

cut some shims from the supplied steel shims picture 3.

Pictures 4 and 5 perfect working key

brilliant machine for the money thumbsup

Brilliant !!!!rofl
That is the solution I've been looking for

You saved my day

Help = Thanks + Reputation Button rofl
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS
30-06-2018, 21:35 PM
Post: #7
RE: Making double sided flat keys with Defu 386A verticle key machine
Have done similar with the universal clamps - I ordered three - one to use for normal laser and one for back up and one to play with
Ordered another to do what the OP has done
Good post and pics.

Excellent
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
RHonda Honda Bike TransAlp 2007 All Keys Lost in llavemg 22 584 Yesterday 16:31 PM
Last Post: raffy haddad
  Mercedes w211 keys generate in fisekovic 8 178 13-07-2018 21:27 PM
Last Post: fisekovic
YTMercedes Mercedes Benz Keys Service From EIS/EZS in volavka 220 52,536 13-07-2018 11:58 AM
Last Post: raffy haddad
YTMercedes W210 EZS ALL KEYS USED in bramgt 1 168 20-04-2018 12:10 PM
Last Post: volavka
  Generate keys w210 in loki954 1 219 20-03-2018 14:48 PM
Last Post: ROD-BENDERS
YTMercedes PLEASE GENERATE W210 EZS KEYS in mohcin2 1 257 26-02-2018 20:30 PM
Last Post: rola1971
  Toyota Rush 2006 All Keys Lost in mymundo3 4 901 07-02-2018 19:11 PM
Last Post: mehmet becker
0Immo Universal car keys programmer in majster5 5 647 27-01-2018 21:51 PM
Last Post: mar.wo
YTMercedes Vito keys calculate in fisekovic 1 336 27-01-2018 12:24 PM
Last Post: raffy haddad
  Need HELP in chevorlet tahoe 2017 smart key all keys lost in adel.nooh 3 312 23-01-2018 05:19 AM
Last Post: adel.nooh

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content