Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ENET Cable not showing Voltage in EasyConnect
19-11-2017, 15:41 PM,
Post: #1
|
|||
|
|||
ENET Cable not showing Voltage in EasyConnect
Has anyone had an issue with EasyConnect not showing voltage when set to ENET (autodetect)?
Esys works fine with this setting but ISTA doesn't read car when in ediabas mode |
|||
19-11-2017, 15:46 PM,
Post: #2
|
|||
|
|||
RE: ENET Cable not showing Voltage in EasyConnect
Enet cable can't read voltage. So ISTA is not showing it.
|
|||
19-11-2017, 15:48 PM,
Post: #3
|
|||
|
|||
RE: ENET Cable not showing Voltage in EasyConnect
I was sure I had seen it previously, maybe not!
ISTA should be able to read car though with ENET Cable shouldn't it? |
|||
19-11-2017, 18:53 PM,
Post: #4
|
|||
|
|||
RE: ENET Cable not showing Voltage in EasyConnect
(19-11-2017, 15:46 PM)Node Wrote: Enet cable can't read voltage. So ISTA is not showing it.I do not have trouble with ENET and reading engine turnover during fault clearing or running battery tests. |
|||
19-11-2017, 19:14 PM,
Post: #5
|
|||
|
|||
ENET Cable not showing Voltage in EasyConnect
Do I need a special ediabas file for ista to see enet cable?
Sent from my iPhone using Tapatalk |
|||
19-11-2017, 19:23 PM,
Post: #6
|
|||
|
|||
RE: ENET Cable not showing Voltage in EasyConnect
(19-11-2017, 19:14 PM)mcrussell Wrote: Do I need a special ediabas file for ista to see enet cable? Not if connecting via ICOM/ENET. If you do via Ediabas, then it must be configured accordingly. |
|||
19-11-2017, 19:54 PM,
Post: #7
|
|||
|
|||
RE: ENET Cable not showing Voltage in EasyConnect
Open your Ediabas.ini in default Ediabas location c:\Ediabas\bin and also Ista directory Ediabas\bin and check and configure
UBATT HANDLING = 1 IGNITION HANDLING = 1 CLAMP HANDLING = 1 Try it and see if it works.. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW Remote ENET | B O S S | 11 | 1,208 |
06-04-2024, 17:38 PM Last Post: Jalami |
|
ISTA D and P cable, a good one | ac427 | 3 | 272 |
02-04-2024, 14:23 PM Last Post: ac427 |
|
FEM Not working with ENET but works wtih DCAN | armenh7 | 2 | 276 |
01-04-2024, 20:21 PM Last Post: armenh7 |
|
Ultimate Ediabas/ISTA+ voltage control V3 | Node | 322 | 122,598 |
24-03-2024, 23:45 PM Last Post: armenh7 |
|
TestO whit E-net cable | Eyestorm | 3 | 422 |
11-03-2024, 13:43 PM Last Post: vikro2000 |
|
Direct Ethernet to OABR cable for nbt evo coding | HU_man | 14 | 1,455 |
01-03-2024, 07:41 AM Last Post: dncomputech |
|
BMW ICOM OBD main cable 15pin to 16pin | body1982 | 5 | 603 |
27-01-2024, 04:42 AM Last Post: body1982 |
|
ISTA AOS and enet cable | Wojti77 | 6 | 1,263 |
24-01-2024, 04:28 AM Last Post: vipsha |
|
BMW e91 320D 163 hp drop charge voltage | aidasystemsbg | 12 | 444 |
05-01-2024, 19:31 PM Last Post: jaki |
|
No wifi internet after connecting enet via cable. | AlpinWeiss2k18 | 4 | 324 |
20-12-2023, 01:17 AM Last Post: gfriedrichi |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content