Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
X3 F25 Move Navigation update Failed - need help..
24-11-2017, 23:05 PM,
Post: #11
|
|||
|
|||
RE: X3 F25 Move Navigation update Failed - need help..
(23-11-2017, 03:06 AM)Roo Wrote:(22-11-2017, 20:43 PM)buzzy Wrote:Then you definitely need to follow the advice in post #2 in the first place, imo.(22-11-2017, 20:02 PM)Roo Wrote: What if the car is moving and not standing? code your cic again with esys,or ista P and retry with new usb pen with fresh download files ,do not forget to unblock the files. |
|||
10-03-2019, 22:45 PM,
Post: #12
|
|||
|
|||
RE: X3 F25 Move Navigation update Failed - need help..
(22-11-2017, 20:44 PM)0176.abraham Wrote: Try again is sometimes stoped on 60-70% try again usb stick and then is good. Could you explain how to code to do an update while the car is not moving, especially for map Motion will be helpfull. Thank youo! Spasibo! |
|||
11-03-2019, 08:45 AM,
(This post was last modified: 11-03-2019, 08:46 AM by Fatalix.)
Post: #13
|
|||
|
|||
RE: X3 F25 Move Navigation update Failed - need help..
(10-03-2019, 22:45 PM)320ed Wrote:(22-11-2017, 20:44 PM)0176.abraham Wrote: Try again is sometimes stoped on 60-70% try again usb stick and then is good. Attached a pdf guide how to flash update control units using Esys. Start from page 5, the procedure is the same for you car as every other and depending on which connection type you use you can connect to the car as you want. ENET cable over vin connection is fine for headunit flash. Make sure you have a charger connected that can maintain at least 14 volts constant during update or you may brick the unit. Also make sure you save your original SVT soll before flashing so you have an extra backup if something goes wrong to flash back to. |