[claw]

Hi guys.

I've replaced F11 climate control with used one with auto buttons.
It worked just like that without any code.
Then i wanted to have memory off, so i injected cafd and when i try to "CODE" i get an error. I can read coding data, but not write.
Also now the seat heating lights don't show up (it turns on seat heating stiil).

How can i solve this?

Attached ESYS screenshot.

Thanks

[SweetBMW]

Flash it first?

[semihmutcali]

You have to flash it first

[claw]

Thanks. Do you guys know how long it takes to flash it?

[Loliceman]

Thanks. Do you guys know how long it takes to flash it?

2-3 minutes at most.

[muskatas]

Thanks. Do you guys know how long it takes to flash it?

2-3 minutes at most.

There is no MOST in F series. But yes it takes up to 5min.

[Node]

You know - most very much differs from MOST

[claw]

Thanks. Do you guys know how long it takes to flash it?

2-3 minutes at most.

There is no MOST in F series. But yes it takes up to 5min.

I believe he meant "at the most" and not over MOST.

[Loliceman]

Thanks. Do you guys know how long it takes to flash it?

2-3 minutes at most.

There is no MOST in F series. But yes it takes up to 5min.

I meant 2-3 minutes MAX..

[SweetBMW]

Thanks. Do you guys know how long it takes to flash it?

2-3 minutes at most.

There is no MOST in F series. But yes it takes up to 5min.

Others have pointed out that he meant few minutes max. But just FYI there is MOST in F series also. Just no MOST diagnostic port for ICOM B