Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II

  2. CarLabImmo

  3. TMPro 2



External programmer tl866A, need advice
25-11-2017, 22:08 PM, (This post was last modified: 25-11-2017, 22:27 PM by grmsek.damjan.)
Post: #1
External programmer tl866A, need advice
Hello
I need advice, I want to buy some external programmer, but I dont know which one(its a lot of programmers).I know some genuine will be the best choice, but I will need it a few times a year just for read flash 29F200.., 29F400..,29F800..,29F010 and some 8pins eeproms (now for eeproms read I used genuine carprog)
So, question ,is maybe tl866A minipro good choice for 29f200..,29f400..,29f800..44pin flash read?
I want to buy also SOP44 adapter, plcc32 adapter for 29F010 and SOP8 adapter for eeproms readbiggrin
Where can I buy "genuine" hiddentmi minipro tl866A that works perfect?Is this possible?biggrin
(On the web there is a flood of these programmers)thinking
Thankyou

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
26-11-2017, 03:55 AM,
Post: #2
RE: External programmer tl866A, need advice
(25-11-2017, 22:08 PM)grmsek.damjan Wrote:  Hello
I need advice, I want to buy some external programmer, but I dont know which one(its a lot of programmers).I know some genuine will be the best choice, but I will need it a few times a year just for read flash 29F200.., 29F400..,29F800..,29F010 and some 8pins eeproms (now for eeproms read I used genuine carprog)
So, question ,is maybe tl866A minipro good choice for 29f200..,29f400..,29f800..44pin flash read?
I want to buy also SOP44 adapter, plcc32 adapter for 29F010 and SOP8 adapter for eeproms readbiggrin
Where can I buy "genuine" hiddentmi minipro tl866A that works perfect?Is this possible?biggrin
(On the web there is a flood of these programmers)thinking
Thankyou
Yes very good
Quote this message in a reply
[+] 1 user says Thank You to kujto for this post
26-11-2017, 06:15 AM,
Post: #3
RE: External programmer tl866A, need advice
Hello
It is good programmer
It is chinese you can find it on web
There is tl866a and tl866cs they both same but the cs has additional socket in front
To reas atmega mcu by wires
Regards
Reputation: +2 - ROD-BENDERS [+1] , grmsek.damjan [+1]
Quote this message in a reply
[+] 2 users say Thank You to raffy haddad for this post
26-11-2017, 07:33 AM, (This post was last modified: 28-11-2017, 10:18 AM by dabaca.)
Post: #4
RE: External programmer tl866A, need advice
(25-11-2017, 22:08 PM)grmsek.damjan Wrote:  Hello
I need advice, I want to buy some external programmer, but I dont know which one(its a lot of programmers).I know some genuine will be the best choice, but I will need it a few times a year just for read flash 29F200.., 29F400..,29F800..,29F010 and some 8pins eeproms (now for eeproms read I used genuine carprog)
So, question ,is maybe tl866A minipro good choice for 29f200..,29f400..,29f800..44pin flash read?
I want to buy also SOP44 adapter, plcc32 adapter for 29F010 and SOP8 adapter for eeproms readbiggrin
Where can I buy "genuine" hiddentmi minipro tl866A that works perfect?Is this possible?biggrin
(On the web there is a flood of these programmers)thinking
Thankyou
Hi. by a manufacturer.


Attached Files
txt.txt
File Type: .txt
Downloaded: 22 times
Size: 42 bytes

Reputation: +1 - grmsek.damjan [+1]
Quote this message in a reply
[+] 1 user says Thank You to dabaca for this post
26-11-2017, 08:30 AM, (This post was last modified: 26-11-2017, 08:31 AM by grmsek.damjan.)
Post: #5
RE: External programmer tl866A, need advice
Thankyou..
But can anybody give the link that I can buy from manufacturer(ebay,alliexpress)..Almost everyone seller writes that is 100%
original only to mislead the buyerthinking???!
Thankyou

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
26-11-2017, 08:46 AM, (This post was last modified: 26-11-2017, 08:47 AM by fisekovic.)
Post: #6
RE: External programmer tl866A, need advice
(26-11-2017, 08:30 AM)grmsek.damjan Wrote:  Thankyou..
But can anybody give the link that I can buy from manufacturer(ebay,alliexpress)..Almost everyone seller writes that is 100%
original only to mislead the buyerthinking???!
Thankyou

Tl866 is original chinesse product.... There is no other "original" like for example XPROG and simillar tools...

edit: and yes it works good for your needs and you can buy any from good seller on aliexpress
Reputation: +1 - grmsek.damjan [+1]
Quote this message in a reply
[+] 2 users say Thank You to fisekovic for this post
27-11-2017, 17:33 PM,
Post: #7
RE: External programmer tl866A, need advice
Thankyou for help..
Hm, whats the difference between this two adapters, some tl866a programmers have different SOP44 adapter (pictures bellow),some of them direct, but some have TSOP48 to SOP44???
Can I update sw with newer version when it will be available or hw will be locked after and tl866 will be only to put it on a cristmas treebiggrin
Thankyouunder


Attached Files Thumbnail(s)
       
order.txt
File Type: .txt
Downloaded: 7 times
Size: 154 bytes


Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
27-11-2017, 17:47 PM,
Post: #8
RE: External programmer tl866A, need advice
Hello
Yes you can update it when available
In software it has this function
Quote this message in a reply
[+] 1 user says Thank You to raffy haddad for this post
27-11-2017, 20:29 PM, (This post was last modified: 27-11-2017, 20:32 PM by grmsek.damjan.)
Post: #9
RE: External programmer tl866A, need advice
And why are these two SOP44 adapters are different? Some ful sets are sold as on picture 1 above (normal-green), some sets as on picture2 TSOP48/SOP44 (red)??? both are for tl866A,found on webthinking,and I would like to know before I will orderwait
Thankyouhi

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply
28-11-2017, 16:50 PM,
Post: #10
RE: External programmer tl866A, need advice
Nobody knows?wondering

Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mercedes nec key programmer need help Shinehead 2 188 Yesterday, 06:17 AM
Last Post: raffy haddad
  MERC KEY PROGRAMMER POLDIAG NEED HELP Shinehead 4 362 08-06-2019, 14:54 PM
Last Post: reewerd
ORenult Need some Renault expert advice (Modus pin or isk code) tronico 1 109 06-06-2019, 10:45 AM
Last Post: tigre
  advice bosch me9.7 ecu salliemohamed 1 139 27-04-2019, 09:07 AM
Last Post: ka_rai
KVauxhall carprog 8 vs 10 advice alanans 7 351 08-04-2019, 12:52 PM
Last Post: keyzex
  advice please on mercedes w204 ezs and ecu salliemohamed 1 130 02-04-2019, 21:44 PM
Last Post: Ecutech
  Solved ✔ please help advice bmw frm3 module salliemohamed 5 251 20-03-2019, 09:57 AM
Last Post: salliemohamed
  please advice on vw dq200 mechatronic salliemohamed 0 78 23-01-2019, 12:16 PM
Last Post: salliemohamed
  Advice to Clone IAW 5NR.C2 kos222 4 289 14-11-2018, 11:19 AM
Last Post: kos222
XZBMW Yanhua ACDP mini programmer Cniksor 4 674 14-10-2018, 06:22 AM
Last Post: Cniksor

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content