Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
External programmer tl866A, need advice
28-11-2017, 19:22 PM,
Post: #11
|
|||
|
|||
RE: External programmer tl866A, need advice
You need red one for tl866 , you are making too much big deal for 50eur programmer + adaper
|
|||
28-11-2017, 19:28 PM,
Post: #12
|
|||
|
|||
RE: External programmer tl866A, need advice
I have a miniprog A with red adapter
it works well for 29F400 and 29F200 !!! |
|||
30-11-2017, 19:08 PM,
Post: #13
|
|||
|
|||
RE: External programmer tl866A, need advice
Thankyou, tl866A and red TSOP48/SOP44 are ordered.I will report if I have any problems
Thankyou Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
10-05-2018, 17:13 PM,
(This post was last modified: 10-05-2018, 18:53 PM by grmsek.damjan.)
Post: #14
|
|||
|
|||
RE: External programmer tl866A, need advice
Hi
Me again.I ordered tl866a and allready tested 29f400bb read and write mod file (skoda fabia simos 3PG) without problem But now I tried to work on 29f200bb , it reads OK (256KB), but with writting I get error message in the picture bellow (prt sc),even if I tried to writte ori file back This 29f200bb is from sirius 32N, I allways read and write this ecu with ktag boot mode without problem, but only this sirius 32N my ktag wont read with boot mode,so I decided to read it with minipro,but It wont want to write, allways with this error Is this 29f200bb flash faulty or I have a problem with minipro? (legs from flash are clean with pcc cleaner and also brushed on a fine brushed flat stone) Thankyou Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
10-05-2018, 17:54 PM,
Post: #15
|
|||
|
|||
RE: External programmer tl866A, need advice
For flash 29 44 pin you need the red one and it comes also with adapters for other MCU
Regatds Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +1 - grmsek.damjan [+1] | |||
10-05-2018, 17:59 PM,
Post: #16
|
|||
|
|||
RE: External programmer tl866A, need advice
First erase 29FX00!
After erase you can write |
|||
Reputation: +1 - grmsek.damjan [+1] | |||
10-05-2018, 18:44 PM,
Post: #17
|
|||
|
|||
RE: External programmer tl866A, need advice
I use genuine red TSOP48/44 adapter (test TSOP48 Detect is V3)
Also tried erase chip, erase message successfull, but when I tried to read it again its not an empty file with all FFFF, but old data is still on flash What do you think? Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
04-06-2018, 14:26 PM,
Post: #18
|
|||
|
|||
RE: External programmer tl866A, need advice
Solved Brushed legs on the flat fine stone was not enough,so I also gently brushed legs from the outside with a little flat diamont file until I have seen a little copper bellow,added a little pcc cleaner, after then I can read and write 29f200BB without problems
Thankyou Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
27-08-2018, 18:01 PM,
Post: #19
|
|||
|
|||
RE: External programmer tl866A, need advice
Hi
I have one just question.. Can we enable write protection function (wp) for 8pin eeproms with tll866a and if, where is this function to enable before writting? Thankyou Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
11-01-2019, 14:11 PM,
Post: #20
|
|||
|
|||
RE: External programmer tl866A, need advice
hi help please I have sirius without can and eprom 29f200bb how to read tl866 in 16 bi7 or 8bit? Tanks in advance.
Vai avanti, anche quando tutti si aspettano che lasci perdere.
Go ahead, even when everyone expects you to lose. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content