Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E90 cas: starter motor (terminal 50)
03-02-2022, 17:40 PM,
(This post was last modified: 03-02-2022, 17:41 PM by Semi14.)
Post: #11
|
|||
|
|||
RE: E90 cas: starter motor (terminal 50)
Hello
I have a similar problem on a 2014 X1 E84 with an automatic transmission A0B3 error in CAS The car spins the starter for about 5 seconds, then the starter turns off The car will start for about 20 shots What has been done : - Starter It turns after shorting the cables for a short time at CAS - The starter has been changed - Replaced Ignition switch with tape and START button - CAS clone made - I made an extra key - CAS and DDE update done - Stop sensor checked - In ISTA shows pedal depressed What a strange thing. As soon as the car starts, you can fire it every time, it will not fall asleep Maybe you have any ideas what else to check ??? DDE ?? If I helped you, press "Thanks" + Rep
|
|||
04-02-2022, 07:10 AM,
Post: #12
|
|||
|
|||
RE: E90 cas: starter motor (terminal 50)
as stated above typically no crank is the engine grounding strap if the started tested correctly
|
|||
04-02-2022, 10:41 AM,
Post: #13
|
|||
|
|||
RE: E90 cas: starter motor (terminal 50)
(04-02-2022, 07:10 AM)that4chanhacker Wrote: as stated above typically no crank is the engine grounding strap if the started tested correctly as I wrote above, the car turns the starter for 3-5 seconds This is not the ground. Checked If I helped you, press "Thanks" + Rep
|
|||
08-02-2022, 21:23 PM,
(This post was last modified: 08-02-2022, 21:25 PM by Semi14.)
Post: #14
|
|||
|
|||
RE: E90 cas: starter motor (terminal 50)
Problem solved .
If I helped you, press "Thanks" + Rep
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content