Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A5 BCM2 all keys lost
04-12-2017, 19:23 PM,
Post: #1
|
|||
|
|||
Audi A5 BCM2 all keys lost
Ok so i have an audi a5 2009 all keys lost situation
i attended and tried to use the vvdi2 to pull the immo data from the bcm2 to make a dealer key, however it told me to turn the ignition on with a valid key or if no valid key to turn the lights on and press the brake, it connects to the bcm2 and pulls the part number and shows the number of keys - 2, ignition on - no and key learned - no. but then states it failed to enter service mode. so i tried to read it with the bdm programmer, but it fails to read it. so i read the flash 70F3239HM and eeprom 95320 but when i load them into the bcm2 dump tool it just gives the following nonsense VIN=°qgº÷°0¹¾\iŒ¸µ CS=CFD3646204697B7F1A569B7DC10639AD POWER_CLASS=12 IMMO_STATUS=1###0:Not Learned(Virgin), 1:Learned KEY_COUNT=8 KEY_1=CC5F0D92 KEY_2=40A9B9DC KEY_3=F9433F0C KEY_4=97D7972E KEY_5=DDFCDF0F KEY_6=9036FA6F KEY_7=9036FA6F KEY_8=9036FA6F basically can somebody tell me if the files are correct and if not could somebody please assist in getting the required information to get this vehicle going again |