Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VAG17.1.3 REQUEST
03-12-2017, 22:20 PM,
(This post was last modified: 03-12-2017, 22:21 PM by rasmoka.)
Post: #1
|
|||
|
|||
VAG17.1.3 REQUEST
Hi, I bought 2 VAG17.1.3 from procardiag.com, they said it works with original Rosstech SW, is this right ?
Can I download SW from official Rosstech website ? how can activate it ? |
|||
03-12-2017, 22:29 PM,
Post: #2
|
|||
|
|||
RE: VAG17.1.3 REQUEST
(03-12-2017, 22:20 PM)rasmoka Wrote: Hi, I bought 2 VAG17.1.3 from procardiag.com, they said it works with original Rosstech SW, is this right ? Not work with original software,only crack china |
|||
03-12-2017, 22:47 PM,
Post: #3
|
|||
|
|||
RE: VAG17.1.3 REQUEST
OMG, ok thank for your reply. Now I installed cracked VAG17.1.3 version. I have problem I can't save setting,and interface not found when I plugged it in the car.
see pic "plugged in the car" and "not plugged" |
|||
04-12-2017, 05:39 AM,
(This post was last modified: 04-12-2017, 07:48 AM by apoelistas.)
Post: #4
|
|||
|
|||
RE: VAG17.1.3 REQUEST
I had the same problem
In my case the vcds connector was not made to spec (was wider and did not fit properly) thus it did not work, no communication. As I was examining it and comparing it with another vcds I had (or another diagnostic) I saw that it was not made to spec. If you confirm that this is the problem (no green light when you plug in the VCDs), get a blade and trim the walls of your VCDs connector. Dont know if a course sandpaper would also work. |
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
04-12-2017, 08:36 AM,
Post: #5
|
|||
|
|||
RE: VAG17.1.3 REQUEST
(04-12-2017, 05:39 AM)apoelistas Wrote: I had the same problemno this is not my problem . thanks |
|||
04-12-2017, 09:15 AM,
(This post was last modified: 04-12-2017, 09:17 AM by apoelistas.)
Post: #6
|
|||
|
|||
RE: VAG17.1.3 REQUEST
Did you install the VCDs version supplied with your purchase. Only that version will work. Also remember to turn ignition to accessory mode. It needs power.
|
|||
04-12-2017, 09:25 AM,
Post: #7
|
|||
|
|||
RE: VAG17.1.3 REQUEST
I think it is an issue with the cable. In most cases, the cable is made for the software supplied with the cable. Did you try that software? Which version do you have on the cable by the way? For example, I have Dutch version 17.1.3 and I have interface version 1.96. You can try 17.8.0 from Ross website.
|
|||
04-12-2017, 10:45 AM,
Post: #8
|
|||
|
|||
RE: VAG17.1.3 REQUEST
Only use software shipped with the cable.
BMW 5 Series and Audi Q4 e-tron user.
If it helps, please give rep , thanks! |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
[Request] Skoda EDC17C74 Immo Off | Ryzen | 1 | 100 |
12-03-2024, 11:57 AM Last Post: jaxone |
|
Request: full VCDS scan Audi S3 2007/2008 | ries | 0 | 67 |
29-02-2024, 20:05 PM Last Post: ries |
|
[Request] TPI for ID.4 and ID.6 2023 | JoZerByte | 0 | 97 |
20-02-2024, 06:14 AM Last Post: JoZerByte |
|
Request VW Passat CBBB DQ250 | codingbmwsofia | 1 | 97 |
16-02-2024, 09:25 AM Last Post: pupu144 |
|
[Request] TPI attachment from ODIS Service Net | pigr8 | 3 | 261 |
15-02-2024, 09:32 AM Last Post: pigr8 |
|
Airbag flash file request | Venigo^ | 1 | 96 |
14-02-2024, 16:01 PM Last Post: pupu144 |
|
Request Audi A1 2021 -5Q4959593P and 5Q4959592P dataset | gmc1103 | 8 | 265 |
27-12-2023, 15:22 PM Last Post: gmc1103 |
|
request dpf / lambda off | bushido1992 | 2 | 116 |
14-12-2023, 11:42 AM Last Post: obdcloud |
|
Request Ori File 8E5910155H | marcosc4 | 2 | 152 |
11-11-2023, 15:37 PM Last Post: marcosc4 |
|
[REQUEST] factory extras by VIN | XuLeTZ | 1 | 212 |
01-10-2023, 09:18 AM Last Post: Jacce75 |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content