[kklobo]

I replace Headlight old was broken on accident and there is no old tms
Another headlight comes with used Tms Lamps is led technology
In ista D i got error that say "wrong coding index" "wrong version installed"
When calculate test plan in ista they said to code tms and teach in led indicator but not doing thib because "there is less than 11V connect charger procedure will not continue " but i'm using voltage regulator for ista d(always 14V) and lamp got proper voltage.
In esys i dont have green mark and no cafd file on right tms module
but on left i got cafd and green mark

can you tell me what i'm doing wrong?
car f07 740i usa model tms3 i think build date 11.2014

[lynxbmw]

I replace Headlight old was broken on accident and there is no old tms
Another headlight comes with used Tms Lamps is led technology
In ista D i got error that say "wrong coding index" "wrong version installed"
When calculate test plan in ista they said to code tms and teach in led indicator but not doing thib because "there is less than 11V connect charger procedure will not continue " but i'm using voltage regulator for ista d(always 14V) and lamp got proper voltage.
In esys i dont have green mark and no cafd file on right tms module
but on left i got cafd and green mark

can you tell me what i'm doing wrong?
car f07 740i usa model tms3 i think build date 11.2014

Inject cafd by pressing "Detect CAF for SME", then Code and then teach LED in ISTA.

[kmodel99]

As above said, in esys do a inject cafd, “Detect CAF” in coding window, then choose latest file, press ok, then click Code.


Sent from my iPhone using Tapatalk

[Almaretto]

As above said, in esys do a inject cafd, “Detect CAF” in coding window, then choose latest file, press ok, then click Code.


Sent from my iPhone using Tapatalk

Yes. If CAFD is missing, then you can first try injecting. Then, if that fails, program.

[bmw335coding]

Easyest way is with ISTA-P. They detect the two TMS, program and code it.

Try to code FEM_BODY/BDC/CAS first, so both TMS modues will coded/init automaticly.

When it doesn't help, try to inject CAFD with Esys like kmodell9 and Almaretto says.

[kklobo]

Detect caf is greyed it cannot by clicked

[lynxbmw]

Detect caf is greyed it cannot by clicked

Read ECU and click on the TMS with no cafd, it will become active.

[kklobo]

I got i step not available and also greyed out only load is clicable

[Almaretto]

Detect caf is greyed it cannot by clicked

Means you are likely using E-sys 3.28, which has KISWB error. You must update or downgrade if you wish to use that function.

[kklobo]

I deleted psddata folder and replace with correct files detect caf is now working I code frm cas and tms l tms r and still got less than 11v on Ista