[davito1]

How can I diagnose an astra j 1.7cdti I can not see rpm pressure of the rail temperatures etc .but in a 2012 insignia if I can?

[mattydr67]

How can I diagnose an astra j 1.7cdti I can not see rpm pressure of the rail temperatures etc .but in a 2012 insignia if I can?

Are using this version in a 2012 Astra J?
Share some pics from the Mesuring Blocks
Good luck

[davito1]

here I put the photos of the computer opcom 12309a firm 1.59

[mattydr67]

You need at least opcom 131223 version for your car
But better is to use 150406 or 160115a or 170823 versions
This is happening because even you are using a fake vauxcom 120309a + 131223or160115a database, the only thing that its working is what vauxcom 120309a is cover. The rest is fake. You can see what its new but you cannot use it
Good luck

[davito1]

my interface has a chip pic 18f458 micrichip.se brand breaks with another version of opcom?

[mattydr67]

If its original Pic18F458 not chinese fake one then you can use any version of opcom including original one.
But if you wanna be sure that its the right microprocesore just share a pics of your PCB ( microprocesor side )
Good luck

[davito1]

this is my pic of the interface

[mattydr67]

Mate I said entire PCB picture not only the microprocesor picture
Good luck

[davito1]

the new pic .opcom

[mattydr67]

This is old China Clone Revision B one and it has original PIC18F458 inside.
This will support any firmware upgrade or downgrade. So in this case it can be use with any solution. CHINA Clone, HQ Clone or Original software.
Good luck