Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

KL15 & R contact switch CAN commands
30-12-2017, 21:51 PM,
Post: #21
RE: KL15 & R contact switch CAN commands
I had a look at my program and I did it not with a single message because there is a message with a time depending incrementing value.
If you want, I can give you the program for an Arduino, but for CAN1 there is no CAN shield ready to buy, I soldered it by myself.
Quote this message in a reply
01-01-2018, 11:35 AM,
Post: #22
RE: KL15 & R contact switch CAN commands
(30-12-2017, 21:51 PM)gt678 Wrote:  I had a look at my program and I did it not with a single message because there is a message with a time depending incrementing value.
If you want, I can give you the program for an Arduino, but for CAN1 there is no CAN shield ready to buy, I soldered it by myself.

Okay, it will be very interesting!
Happy New Year!
Quote this message in a reply
02-01-2018, 22:00 PM,
Post: #23
RE: KL15 & R contact switch CAN commands
(30-12-2017, 10:29 AM)Loliceman Wrote:  
(30-12-2017, 08:33 AM)hero3838 Wrote:  Yes but you can not code nbt directly in car you have to code it on bench i .now i connect nbt k-can2 line from my orginal zgw01 it works but only rear view camera and side view dont work and some buttun on panel (radio on/off mute ,mode, eject cd, and arrows left right also steering whell control for up down) other all funcuon ok .and i will order kcan to kcan2 bridge i will try with can bridge .most emulator is expensive almost a nbt price 450 euro + shipping .

For rear an side view camera i will connect my older radio with only kline and power and i think cameras will works but i think other button will not work if other button not communicating by most ,it will work with can bridge

Cameras is because that FBAS wires need to be rerouted according to NBT standards.

I rerouted wires but same issue. Camera doesn't work .but when i replace zgw with flashed one camera works.
I am waiting canbus bridge (k-can to k-can2 convertor) i will try converting kcan data and will see .
Quote this message in a reply
03-01-2018, 15:15 PM,
Post: #24
RE: KL15 & R contact switch CAN commands
Here is a list with Ibus commands. Takes a little time to understand, but eventually it is easy.

http://web.comhem.se/bengt-olof.swing/IBus.htm
Quote this message in a reply
[+] 2 users say Thank You to KahN for this post
03-01-2018, 17:37 PM,
Post: #25
RE: KL15 & R contact switch CAN commands
(03-01-2018, 15:15 PM)KahN Wrote:  Here is a list with Ibus commands. Takes a little time to understand, but eventually it is easy.

http://web.comhem.se/bengt-olof.swing/IBus.htm

Thank you a lot! I'm not sure that it's suitable for E6x CAN bus, but it will help me anyway. Thank you again!
Quote this message in a reply
04-01-2018, 10:39 AM,
Post: #26
RE: KL15 & R contact switch CAN commands
I have a bench for e serie with CAS, KGM and Key.
Ignition ON and OFF is no problem.

i have a second bench for f serie with CAN BRIDGE from carsystems and ZGW02 8SK
but here cant Ignition OFF sad
i need this for NBT correctly off.


what can i do?
Quote this message in a reply
04-01-2018, 11:52 AM,
Post: #27
RE: KL15 & R contact switch CAN commands
(04-01-2018, 10:39 AM)Emmy Wrote:  I have a bench for e serie with CAS, KGM and Key.
Ignition ON and OFF is no problem.

i have a second bench for f serie with CAN BRIDGE from carsystems and ZGW02 8SK
but here cant Ignition OFF sad
i need this for NBT correctly off.


what can i do?

I can't think of any reason why you need to have ignition OFF for your NBT bench? But, If u need it to stop sending ignition ON, just disconnect either CAN_L or CAN_H / power 12v from your CAN Bridge?

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Quote this message in a reply
04-01-2018, 15:10 PM,
Post: #28
RE: KL15 & R contact switch CAN commands
(04-01-2018, 11:52 AM)Loliceman Wrote:  
(04-01-2018, 10:39 AM)Emmy Wrote:  I have a bench for e serie with CAS, KGM and Key.
Ignition ON and OFF is no problem.

i have a second bench for f serie with CAN BRIDGE from carsystems and ZGW02 8SK
but here cant Ignition OFF sad
i need this for NBT correctly off.


what can i do?

I can't think of any reason why you need to have ignition OFF for your NBT bench? But, If u need it to stop sending ignition ON, just disconnect either CAN_L or CAN_H / power 12v from your CAN Bridge?

disconnect CAN bridge dont works.
display goes off but NBT keeps going.

i need this.. i have my reasons
Quote this message in a reply
06-01-2018, 19:32 PM,
Post: #29
KL15 & R contact switch CAN commands
Hi can you send me the can sheild info please I would like to make a bench setup for e series.

I have 1 for f series thanks

Sent from my HTC One X9 using Tapatalk
Quote this message in a reply
06-01-2018, 23:35 PM,
Post: #30
RE: KL15 & R contact switch CAN commands
(04-01-2018, 15:10 PM)Emmy Wrote:  
(04-01-2018, 11:52 AM)Loliceman Wrote:  
(04-01-2018, 10:39 AM)Emmy Wrote:  I have a bench for e serie with CAS, KGM and Key.
Ignition ON and OFF is no problem.

i have a second bench for f serie with CAN BRIDGE from carsystems and ZGW02 8SK
but here cant Ignition OFF sad
i need this for NBT correctly off.


what can i do?

I can't think of any reason why you need to have ignition OFF for your NBT bench? But, If u need it to stop sending ignition ON, just disconnect either CAN_L or CAN_H / power 12v from your CAN Bridge?

disconnect CAN bridge dont works.
display goes off but NBT keeps going.

i need this.. i have my reasons

If you think with your brain. This is exactly what happens when u take ignition off... The headunit stays on for a few minutes.. fail oh gosh

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW X5 E70 KL15=0 after attempted theft PUMUKY1 9 388 11-03-2024, 01:43 AM
Last Post: PUMUKY1
XZBMW g20 driver's switch block redog4dy 5 357 23-11-2023, 19:25 PM
Last Post: redog4dy
XZBMW Mini R56 KL15: 0 PUMUKY1 9 490 16-11-2023, 18:58 PM
Last Post: Dirchik
  ISTA switch Node 26 3,872 14-11-2023, 22:18 PM
Last Post: DarkSide
XZBMW Coding Tailgate Free contact (Retrofit) ruben_17non 2 291 27-10-2023, 09:08 AM
Last Post: ruben_17non
XZBMW BMW part number for connector contact Vojno 4 555 03-10-2023, 08:22 AM
Last Post: schaeublew
  KL15 voltage Icom VroomVroom 1 244 17-09-2023, 20:46 PM
Last Post: Esysx
XZBMW BMW F10 M5 gear selector switch retrofit on regular F10 leungsk1 12 1,639 14-08-2023, 18:47 PM
Last Post: mrpetesingh
XZBMW E93 windows not fully open and didnt close with W.switch when convertible opend rana 10 692 13-08-2023, 16:28 PM
Last Post: izm
XZBMW [BMW] KL15 thanhphan1004 3 391 12-05-2023, 17:39 PM
Last Post: jararak

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content