[pesona]

Xentry Pt 09-2019 installed

Hello Pesona, hello Ross,

some more news from my research:
If the addon update isn´t running you have to check whether DAI-ADMIN Service is running. I prefer the setting of "Manual".
After having updated all my addons the icon "Xentry Update Servece Control Center Light" is shown on my desktop. Starting this at admin rights it build up a connection to a side where you can check up your xentry PT version, download CFF Files etc.
Here I am not so experienced but I think this must be very interesting for a lot of guys here in the forum.
Br grabbelmanko

My steps for the update using this update page:

The side has recognized my xPT Version and is offering a newer version for DL.
I am in a risky mood and will keep going on.
I have downloaded XPT_19.9.3.
Trying to make an update.
Up to this step your longkey is fully accepted.
Starting update
277 Moduls were deleted
228 Moduls repaired and165 new moduls. Taking around 2 hours.
After this I am using xpt 9/2019!

BR and many thanks to you!
grabbelmanko

@Ross2018: Same Problem as you have already mentioned. The side can´t be reached at this moment.

great. now, i upgrade my xdpt from 2019-07 to 2019-09 too using xentry update service too.
fyi, my xdpt longkey is not deleted by configassist while online.

[AfXv237]

Xentry Pt 09-2019 installed

Hello Pesona, hello Ross,

some more news from my research:
If the addon update isn´t running you have to check whether DAI-ADMIN Service is running. I prefer the setting of "Manual".
After having updated all my addons the icon "Xentry Update Servece Control Center Light" is shown on my desktop. Starting this at admin rights it build up a connection to a side where you can check up your xentry PT version, download CFF Files etc.
Here I am not so experienced but I think this must be very interesting for a lot of guys here in the forum.
Br grabbelmanko

My steps for the update using this update page:

The side has recognized my xPT Version and is offering a newer version for DL.
I am in a risky mood and will keep going on.
I have downloaded XPT_19.9.3.
Trying to make an update.
Up to this step your longkey is fully accepted.
Starting update
277 Moduls were deleted
228 Moduls repaired and165 new moduls. Taking around 2 hours.
After this I am using xpt 9/2019!

BR and many thanks to you!
grabbelmanko

@Ross2018: Same Problem as you have already mentioned. The side can´t be reached at this moment.

great. now, i upgrade my xdpt from 2019-07 to 2019-09 too using xentry update service too.
fyi, my longkey is not deleted by configassist while online.

Hello,
I have just received my clone SDconnect C5 fuso edition (red case, might be old C4 inside). I bought it specifically for a 2010 Mitsubishi Canter Fuso ED5 (Euro5), but it does not connect. It works on Mercedes cars though. I select the vehicle in Xentry then it opens DAS and it returns a Communication fault. (tested with Launch and Delphi and it connects to ECU). Maybe if I would reinstall a fresh Xentry 07/2019 on a new SSD with a long key would it work? (Hardware ID: 42695D4A2D86)

Best Regards!

[pesona]

@AfXv237
i have give you new longkey to try in longkey thread.
fusoconnect should use openshell nfz fuso by default. (afaik,i have uploaded in this forum too release 2016-12)
but if you use xentry openshell (all version), probably you should enable fuso in certain configuration file.

[pesona]

What's new
Aug 23, 2018

• Add Xentry Passthru 2019-09 torrent link (thanks to ross2018 & liusberg) & google link (thanks to ross2018)
  

[pesona]

What's new
Aug 25, 2019
Add Missing pics, Wallpaper, 2221-45 Fix for XDOS & XDPT 2019-09

[mb209]

Hi Pesona

I'm always grateful for your great work
I installed XENTRY2019.09
This software is very slow to diagnose compared to 2019.07
I'm using a new long key, is this just me?
When using Xentry2019.07, diagnosis speed is very fast

Best regards

[ross2018]

Yes, I notice the same thing in 09-2019

[mb209]

Yes, I notice the same thing in 09-2019

Hi ross2018

Thank you for your reply
It wasn't just my problem!
The diagnosis speed is slow and I feel very bad
I want this issue to be resolved quickly

[ross2018]

Wait for an addon or go back to 07-2019.

[pesona]

...
Hello,
I have just received my clone SDconnect C5 fuso edition (red case, might be old C4 inside). I bought it specifically for a 2010 Mitsubishi Canter Fuso ED5 (Euro5), but it does not connect. It works on Mercedes cars though. I select the vehicle in Xentry then it opens DAS and it returns a Communication fault. (tested with Launch and Delphi and it connects to ECU). Maybe if I would reinstall a fresh Xentry 07/2019 on a new SSD with a long key would it work? (Hardware ID: 42695D4A2D86)

Best Regards!

the old curse with fuso canter, by default, it has to use a very expensive obd2 Fuso canter cable:
C3: Mercedes part no 6511 1280 99
SDConnect: SDConnect OBD2 FusoCanter
or daudi said that has to use SDConnect DOIP+OBD2 DOIP

yesterday i made a patch and with the help of ross2018 who patiently did the teamviewer (i am lazy and never will do teamviewer), AfXv23 succeeded to diagnose his Fuso Canter ED5 with standard OBD2 cable.

Thanks to ross2018 for help install the patch thru teamviewer, and thanks to AfXv23 who in the field and gave me what i asked regarding error print file and obd2 connector pinout.