[788454]

I have not tested tomorrow I will test it with sd4

try. according to the results accomplish your goal

[pesona]

I have not tested tomorrow I will test it with sd4

hi,
Please don't. it will not work with sdconnect (part T/W). you have to buy passthru device (part J) e.g VAS5054 with OKI AMB2000 chips.
if your sdconnect serial is in blacklist number, then your sdconnect will be blocked.

if you want to use your sdconnect, you need xentry xdos.
i made a thread in other forum xdos installation 2018 for dummies.
i will update my first post here with xdos asap.

[wassim]

But I install xdos xentry what the problem and how i know my sd its blacklist number or no
please

[pesona]

I have a list of blacklist number from xentry. but it is better to avoid the sdconnect block by installing the xentry blacklist. please look at the first post point 9b.

[wassim]

I did not understand please

[vagvag]

I did not understand please

You not understand from begining since Xentry passthru not using Sdconnect multiplexer.......
Using passthru J2534 device...........
Regarts........

[Dee67]

Hello,
Could any fellow members suggest the interface and supplier for this 'pass thru' software.
I know VAS5054 has been mentioned in this post, but any other recommendations?
Thanks in advance

[Floryn_P]

Hello,
Could any fellow members suggest the interface and supplier for this 'pass thru' software.
I know VAS5054 has been mentioned in this post, but any other recommendations?
Thanks in advance

Hi,

try GM MDI and see.

Regards

[Dee67]

One more thing, can autocom cdp+ interface be used with this Xentry Pass Thru?

[pesona]

Hi,
if you already have the autocom cdp+, please try.
i myself have many ideas regarding this xentry passthru and i will upload the result after testing it.