[scrappydoo]

double click the "data" folder, and you can get the setup.exe
good luck

Found the setup.exe file and have clicked it but it then after a minute or two runs the start.exe file anyway and then suffers an issue during installation (Setup MD5 error and then when I try again I get a generic installation problem). I'm trying to install it on an external hard drive off a Dell D630 laptop running windows 7 ultimate 32 bit and use the software with a Star Compact C4.

[Rik]

Hi, i have problem with autorization 18.09 xentry. I realy know how to make license with keygen, but when Xentry start, i have error about unoutorization. BTW when i make license for egzample 2025 year  and saving in to ConfigAsistent it show me 2025, but after first start Xentry it changing again to 2022 year. And Lic_Key_2 also changing. What this is problem?

EDIT
When i make Lic_Key_2.dat read only, Xentry started. Can i leave read only or need another solution?

Lic_Key_2.dat is not read only but the new Lic_Key_2.x4711.

[pesona]

I have installed the last version of the XENTRY Passthru from the first post.
It runs without a problem, but some special functions are protected by a login popup.
as an example : i want configure the PSM of an 907 Sprinter in Xentry (not in DAS).
I have seen the "special functions transporter" patch for the DAS but not for Xentry Diagnostics.
Is there also a patch or a no PW Login function or is this an "online only" function?
Thank you!

there are some options:
1. buy xentry special function keygen in marketplace
2. learn to use vediamo. this is offline special function for xentry.
    for certain special function, need also 'seed key' keygen. you can buy seed key keygen in marketplace too.

Hello, I am new to the world with the purchase of a SD connect 4, and I install believer doing well, PassThru version, off if I understand correctly it does not work? because in fact I have a fatal error 104 at the launch of this one, can you tell me or I did wrong and possibly the good download links

Found the setup.exe file and have clicked it but it then after a minute or two runs the start.exe file anyway and then suffers an issue during installation (Setup MD5 error and then when I try again I get a generic installation problem). I'm trying to install it on an external hard drive off a Dell D630 laptop running windows 7 ultimate 32 bit and use the software with a Star Compact C4.

for sdconnect aka c4, you need xdos not the xentry diagnosis passthru.
xdos is for c3, sdconnect, xentry connect, mb vci
xd passthru is for passthru device e.g vas5054a etc

i remember someone pm me to write complete mercedes diagnosis for beginner or faq.
i wish someday i can do it.

[lulu57360]

Thank you for your answer so if I understand correctly, the link to you are not good because not the Xdos version in? can you tell me where can I find the latest Xdos version?

[pesona]

my links are good. it is for xd passthru. i don't want to attach xdos, because it is already upload by smallville.
here it is.
download the torrent link. it is without password.
fyi, the solutions are the same between xdos and xd passthru.

[bowmont]

I have installed the last version of the XENTRY Passthru from the first post.
It runs without a problem, but some special functions are protected by a login popup.
as an example : i want configure the PSM of an 907 Sprinter in Xentry (not in DAS).
I have seen the "special functions transporter" patch for the DAS but not for Xentry Diagnostics.
Is there also a patch or a no PW Login function or is this an "online only" function?
Thank you!

there are some options:
1. buy xentry special function keygen in marketplace
2. learn to use vediamo. this is offline special function for xentry.
    for certain special function, need also 'seed key' keygen. you can buy seed key keygen in marketplace too.

Thank you for answering!
I've checked the martktplace keygen.
I think you mean an other function , please look at the picture.

[rober.marcos]

Hello, I'm having problems to leave the torque at 100% NOX sensor.
Below 100% have the message "This value cannot be manually entered"
And it does not appear the 100%
Anyone have any idea what it can be?

[ftanha]

Hi,
I have installed, followed every step and applied fixes but at the end I got a message (The Asam3d server is not installed correctly. You are advised to save your application and exit immediately) then I try to close the xentry but it stays running.

what could be the possible mistake I made?

Thanks in advance for your answer

[liusberg]

How enable W212 in DAS, W204 all OK, but W212 not start from DAS menu?

[W211]

Hi,
I have installed, followed every step and applied fixes but at the end I got a message (The Asam3d server is not installed correctly. You are advised to save your application and exit immediately) then I try to close the xentry but it stays running.

what could be the possible mistake I made?

Thanks in advance for your answer

Same error With my xdos on win 10 pro. tried With same soulotion.