[Dee67]

Yes , I already have autocom interface. I shall try it as soon as I download and install the software.
I will report back soon.
Any further suggestions would be appreciated.

[vagvag]

Yes , I already have autocom interface. I shall try it as soon as I download and install the software.
I will report back soon.
Any further suggestions would be appreciated.

Autocom Cdp+ is not passthru device!!!!!!!!!!!!!!!
Regarts........

[bobdinro]

Original AVDI, vxdiag Red work ok.

[MBENZTECH]

I have used the GM MDI2, genuine AVDI, MONGOOSE PRO 2 CAN/ISO CABLE and TRACTIX OPENPORT 2.0. As long as the device is capable of J2534 protocol, it should work. Of course Xentry PassThru only works on CAN modules. So it's safe to say that it should work with 2006 and up vehicles. I was hoping AVDI would work with Xentry PassThru with all modules, but that is not the case.

[ka_rai]

Hi friends

how many capacity need HDD to install it ?

thanks

[pesona]

@ka_rai 120gb is enough

[Dee67]

Interface brands that have been mentioned here, seems to be more towards professional work.
I am looking towards DIY and maybe better understanding of the software.
As anyone tried one of 'chinese' J2534 devices, that will work with this Xentry software? Possibly also with BMW software?
Cheers

[gyenge]

For SD4 or 5 have someone Xentry 2017-12 , or how i could activate xentry 2017-7 ?

[jal1234]

If I am understanding all of the above correctly, I could use a passthru adapter for the newer Mercedes, and a C3 mux for the older cars, all on a single installation/computer per the first post. Is this correct? If so, are there car models (not interested in buses or trucks) that I'd miss with this setup?

Jon

[pesona]

For SD4 or 5 have someone Xentry 2017-12 , or how i could activate xentry 2017-7 ?

for xentry xdos, here it is the latest version:
https://cartechnology.co.uk/showthread.p...#pid295786

for xentry key activation, here:
http://cartechnology.co.uk/showthread.ph...25#pid1425

---

If I am understanding all of the above correctly, I could use a passthru adapter for the newer Mercedes, and a C3 mux for the older cars, all on a single installation/computer per the first post. Is this correct? If so, are there car models (not interested in buses or trucks) that I'd miss with this setup?

Jon

i am too, curious to test many things with this xentry passthru, waiting for my device arrive.
your idea is good too if you can patch das to be used with c3 (need sdconnect toolkit, patches etc).
imho, if that's you want to do (passthru+c3), then there will be no das vehicles that you can't diagnose, coding and programming.

w204 and w212 prototype are vehicles that i want to check the coding with this das passthru.
and of course, my daily do with bus and truck. impossible? let's check the impossible.
anyway, it is just fo fun.